• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.104-115
• /
• 2003

It is well known that Multiple Input Multiple Output (MIMO) systems offer the promise of achieving very high spectrum efficiencies (many tens of bit/s/Hz) in a mobile environment. The gains in MIMO capacity are sensitive to the presence of spatial and temporal correlation introduced by the radio environment. In this paper, we examine how MIMO capacity is influenced by a number of factors e.g., a) temporal correlation b) various combinations of low/high spatial correlations at either end, c) combined spatial and temporal correlations. In all cases, we compare the channel capacity that would be achievable under independent fading. We investigate the behaviour of "capacity fades," examine how often the capacity experiences the fades, develop a method to determine level crossing rates and average fade durations and relate these to antenna numbers. We also evaluate the influence of channel correlation on the capacity autocorrelation and assess the fit of a Gaussian random process to the temporal capacity sequence. Finally we note that the particular spatial correlation structure of the MIMO channel is influenced by a large number of factors. For simplicity, it is desirable to use a single overall correlation measure which parameterizes the effect of correlation on capacity. We verify this single parameter concept by simulating a large number of different spatially correlated channels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.8
• /
• pp.301-306
• /
• 2003

This paper proposes a novel detection scheme using a radial basis function (RBF) network in a multi-input multi-output (MIMO) environment. In order to evaluate the performance of the proposed MIMO-RBF receiver, simulations are performed over the rich-scattering fading channel. Simulation results confirm that the proposed scheme shows the similar bit-error rate (BER) performance of a maximum likelihood detection (MLD) and outperforms Vertical-Bell Laboratories Layered Space-Time using minimum-mean-square-error nulling (VBLAST-MMSE) as well as VBLAST using zero-forcing nulling (VBLAST-ZF). Moreover, we investigate the effect on the performance of the number of RBF center with two modulation formats (BPSK and QPSK) and different number of transmit and receive antennas. The performance of the proposed detector is verified with respect to an initialization-rate of RBF centers.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.326-335
• /
• 2017

In the uplink transmission of massive (or large-scale) multi-input multi-output (MIMO) systems, large dimensional signal detection and its hardware design are challenging issues owing to the high computational complexity. In this paper, we propose low-complexity hardware architectures of Richardson iterative method-based massive MIMO detectors. We present two types of massive MIMO detectors, directly mapped (type1) and reformulated (type2) Richardson iterative methods. In the proposed Richardson method (type2), the matrix-by-matrix multiplications are reformulated to matrix-vector multiplications, thus reducing the computational complexity from $O(U^2)$ to O(U). Both massive MIMO detectors are implemented using a 65 nm CMOS process and compared in terms of detection performance under different channel conditions (high-mobility and flat fading channels). The hardware implementation results confirm that the proposed type1 Richardson method-based detector demonstrates up to 50% power savings over the proposed type2 detector under a flat fading channel. The type2 detector indicates a 37% power savings compared to the type1 under a high-mobility channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.860-867
• /
• 2008

In this paper, we explain differences between SCM and extended SCM(SCME), and investigate how these channel models affects MIMO system level performance. System level simulation is performed according to the number of users and drifting-time intervals with SCM and SCME, respectively. The performance of SCME is slightly better than SCM since mid-paths and the drifting-time in SCME causes more fluctuations in MIMO channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.852-861
• /
• 2009

We propose a complexity reduced Lattice Reduction(LR) scheme for MIMO detection under time varying fading environments. It is found that for successive MIMO transmission instances, the integer matrix P after LR decomposition remains the same or only a few elements of the matrix P are slightly changed. Based on this feature, we perform LR reduction by setting the initial values for P matrix for the decomposition to be the one obtained in the previous instance not starting from the identity matrix. Simulation results reveal that the proposed scheme drastically reduces overall complexity of LR reduction compared to the conventional scheme for various system parameters under time varying channels. We also show that the proposed scheme can be applied to Seysen LR as well as LLL(Lenstra, Lenstra, and Lavasaz)-LR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.487-493
• /
• 2008

In this paper, we consider coded layered space-time architecture in MIMO-OFDM channels. Vertical Bell Lab Layered Space-Time(V-BLAST) scheme employing ordered successive interference cancellation(OSIC) algorithm provides very high spectral efficiency with low computational complexity. However, the error propagation is a major drawback constraining the overall performance of the V-BLAST system significantly. Based on this problem, we derive an improved detector using soft bit log-likelihood ratio(LLR) value. Simulation results show that the proposed detector outperforms the conventional V-BLAST scheme under spatially uncorrelated as well as correlated fading channels.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1071-1088
• /
• 2017

For dual-hop multiple-input multiple-output (MIMO) decode-and-forward relaying systems, we propose a selective relaying scheme that uses orthogonal space-time block code (OSTBC) and transmit antenna selection with maximal-ratio combining (TAS/MRC) or vice versa at the first and second hops, respectively. The aim is to achieve an asymptotically identical performance to the dual-hop relaying system with only TAS/MRC, while requiring lower feedback overhead. In particular, we give the selection criteria based on the antenna configurations and the average channel powers for the first and second hops, assuming Rayleigh fading channels. Also, the numerical results are shown for the outage performance comparison between the dual-hop DF relaying systems with the proposed scheme, only TAS/MRC, and only OSTBC.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.6
• /
• pp.669-676
• /
• 2008

The adaptive resource optimization problem in multi-input multi-output orthogonal frequency division multiple access (MIMO-OFDMA) systems is addressed. This paper, adaptive modulation and coding(AMC) and power control algorithms is proposed with SFC(Space-Frequency Coding), which aims to maximize the system capacity based on the CQI(Channel Quality Information). Firstly, power level is decided to each sub-channels with received feedback signal to noise ratio(SNR). In the second step, sub-carriers are allocated according to modulation type. Simulation results show that the proposed algorithm achieves a better performance than conventional algorithm in terms of capacity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.692-710
• /
• 2013

Conventional interference alignment (IA) for a MIMO interference channel (IFC) requires global and perfect channel state information at transmitter (CSIT) to achieve the optimal degrees of freedom (DoF), which prohibits practical implementation. In order to alleviate the global CSIT requirement caused by the coupled relation among all of IA equations, we propose an IA scheme with a single feedback link of each receiver in a limited feedback environment for a three-user MIMO IFC. The main feature of the proposed scheme is that one of users takes out a fraction of its maximum number of data streams to decouple IA equations for three-user MIMO IFC, which results in a single link feedback structure at each receiver. While for the conventional IA each receiver has to feed back to all transmitters for transmitting the maximum number of data streams. With the assumption of a random codebook, we analyze the upper bound of the average throughput loss caused by quantized channel knowledge as a function of feedback bits. Analytic results show that the proposed scheme outperforms the conventional IA scheme in term of the feedback overhead and the sum rate as well.

• Journal of Broadcast Engineering
• /
• v.16 no.6
• /
• pp.927-940
• /
• 2011

In this paper, we improve a time-domain channel estimation algorithm with multi-input multi-output (MIMO) systems for the next-generation digital television (DTV). The conventional algorithm use orthogonal codes for separating channels from the time-domain orthogonal frequency division multiplexing (OFDM) symbols. However. it has the disadvantage of reduced data-rate because of many pilots. The improved algorithm shows better performance than the conventional one even with reduced number of pilots. The improved algorithm is evaluated by computer simulations.