• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.39-49
• /
• 2015

Some characters and construction theorems of Pseudo Jacket Matrix which is generalized from Jacket Matrix introduced by Jacket Matrices: Construction and Its Application for Fast Cooperative Wireless signal Processing[27] was announced. In this paper, we proposed some examples of Pseudo inverse Jacket matrix, such as $2{\times}4$, $3{\times}6$ non-square matrix for the MIMO channel. Furthermore we derived MIMO singular value decomposition (SVD) pseudo inverse channel and developed application to utilize SVD based on channel estimation of partitioned antenna arrays. This can be also used in MIMO channel and eigen value decomposition (EVD).

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.2
• /
• pp.136-144
• /
• 1999

This paper deals with the fault detection problem in uncertain linear multivariable systems and its application. A robust fault detection method presented by Kim et a. (1998) for MIMO (Multi Input/Multi Output) systems has been adopted and applied to the twin rotor MIMO experimental setup using industrial DSP. The system identification problem is formulated for the twin rotor MIMO system and its parameters are estimated using experimental data. Based on the estimated parameters, some fault detection simulations are performed using the robust fault detection method, which shows that the preformance is satisfied.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.46-49
• /
• 2007

Multiple Antenna Technologies such as Multiple-Input Multiple-Output (MIMO) and Beamforming provide the increase of channel capacity and the reliability of wireless link. To obtain these advantages, WiBro, Mobile WiMAX and $4^{th}$ Generation System are employing multiple antenna technologies. There exist, however, many technical issues in considering the application of the technologies or the providing of services using them. In this paper, various technical topics are discussed and simple solutions are proposed. Beamforming has several technical issues which include coverage imbalance, difficulties in providing Multicast-Broadcast Service (MBS). In Addition, network planning is a critical point from a cell extension and initial network entry point of view. In case of MIMO, network deployment is discussed in that cellular data network such as WiBro has many repeaters. MIMO mode selection for maximizing the cell capacity is also covered.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1121-1128
• /
• 2019

In this paper, we introduce the combination of OFDM(Orthogonal Frequency Division Multiplexing) and MIMO(Multiple-Input Multiple-Output) technology, and explain that this combination seems to be very preferable when designing very high-rate wireless mobile systems. The application of OFDM, with the block diagrams of an OFDM modulator and demodulator and a MIMO-OFDM system, are described. The several diversities are studied at the receiver, analyzed the performances of diversity in OFDM-MIMO system and simulated results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.441-448
• /
• 2012

This paper proposes a multiband Multi-Input Multi-output(MIMO) antenna for universal serial bus(USB) dongle application. The proposed MIMO antenna consists of a modified meander strip line and inverted L stub. The two radiating elements of the MIMO antenna are symmetrically placed with respect to the center of the ground plane. The fabricated antenna satisfied a VSWR below 3 and an efficiency over 35 % in the LTE band 13, 17(704 MHz-787 MHz), DCS/PCS/WCDMA band(1.71 GHz-2.17 GHz), and LTE band 7(2.5 GHz-2.7 GHz). The envelope correlation coefficient(ECC) has below 0.45 in the LTE band 13, 17 and 0.1 in the DCS/PCS/WCDMA band and LTE band 7, respectively.

• Journal of electromagnetic engineering and science
• /
• v.13 no.1
• /
• pp.51-53
• /
• 2013

A MIMO antenna using the resonance of ground planes is proposed for 4G mobile application. A resonant mode is generated when the double ground planes (upper and lower) in the mobile terminal are excited as the radiator. By combining the resonant modes contributed from both the antenna element and the ground planes, the proposed MIMO antenna realizes a wideband property over LTE band 13. In addition, an inductive coil is employed to reduce the antenna volume. These approaches not only simplify antenna design but also effectively improve bandwidth and efficiency. The proposed MIMO antenna has an excellent ECC value of below 0.1 because of the nearly orthogonal radiation patterns of the two radiators. Moreover, an additional antenna is adopted to cover WiMAX, WLAN, and Bluetooth services simultaneously in frequency range from 2 GHz to 2.7 GHz.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.42-48
• /
• 2008

This paper presents an observer design method for a special class of multi input multi output(MIMO) nonlinear systems. First, we characterize the class of MIMO nonlinear systems with a block triangular structure. Also, the observability matrices for SISO nonlinear systems are extended to MIMO systems. By using the generalized observability matrices, it is shown that under the boundedness conditions of system state and input, the proposed observer guarantees the local exponential stability of error dynamics. Finally, its application to induction motor is given to verify the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1291-1298
• /
• 2017

In this paper, we propose a decoding method that improves the transmission rate and reliability by integrating MIMO(Multiple Input Multiple Output) communication scheme using turbo code and FTN(Faster Than Nyquist) scheme among high rate and high reliability wireless communication schemes in wireless communication. The existing MIMO-FTN(Multiple Input Multiple Output-Faster Than Nyquist) scheme based on hierarchical space-time coded method induced data rate loss due to the application of the space-time trellis coding scheme to remove adjacent symbol interference due to FTN scheme. To solve these problems, this paper proposes a method using W-ZF(Weighted-Zero Forcing) which overcomes the disadvantages of ZF(Zero Forcing) scheme in MIMO-FTN scheme using ZF scheme. In this paper, we compared the performance and the transmission rate of the MIMO-FTN scheme based on the hierarchical space-time coding, the MIMO-FTN scheme using W-ZF and the SISO-FTN scheme. As a result, the MIMO-FTN scheme using the W-ZF scheme is two times better than the other two schemes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.924-929
• /
• 2009

In this paper, a dual-band MIMO antenna with a band stop matching circuit for next generation USB dongle application is proposed. The proposed multiband MIMO antenna consists of two dual-band PIFAs which provide wideband characteristics. In order to improve the isolation characteristic at the LTE(Long Term Evolution) band, a band stop matching circuit was inserted at the corner of each antenna element. The inserted band stop matching circuit is to suppress the surface current at the specific frequency band and to generate two additional resonances around 770 MHz for LTE band and near 830 MHz for digital communications network(DCN) service. The proposed MIMO antenna can cover LTE and DCN services, simultaneously.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.115-123
• /
• 1997

In this paper we present a polynomial matrix decomposition algorithm that determines a polynomial matix M(z) which satisfies the relation V(z)=M(z) for a given polynomial matrix V(z) which is paraconjugate hermitian matrix with normal rank r and is positive semidenfinite on the unit circle of z-plane. All the decomposition procedures in this proposed method are performed in the digitral domain. We also discuss how to apply the polynomial matirx decomposition in realizing MIMO LBR two-pairs.