• Journal of Communications and Networks
• /
• v.11 no.3
• /
• pp.279-286
• /
• 2009

This paper proposes an adaptive mode switching algorithm between two strategies in multiple antenna cellular networks:A single-user mode and a multi-user mode for the broadcast channel. If full channel state information is available at the base station, it is known that a multi user transmission strategy would outperform all single-user transmission strategies. In the absence of full side information, it is unclear what the capacity achieving method is, and thus there are few criteria to decide which of the myriad possible methods performs best given a system configuration. We compare a single user transmission and a multi user transmission with linear receivers in this paper where the transmitter and the receivers have multiple antennas, and find that neither strategy dom inates the other. There is instead a transition point between the two strategies. Then, the mode switching point is determined both ana lytically and numerically for a multiple antenna cellular downlink with correlation between transmit antennas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1065-1075
• /
• 2012

For the purpose of providing high data rate real-time services, radio transmission technologies (RTT) for ship ad-hoc network (SANET) based on the Recommendation ITU-R 1842-1 are designed. Physical layer parameters of SANET are contrived to meet the requirements of the specification. In order to improve the link reliability for SANET, in this paper, we investigate the performance of the SANET with the multiple antennas, where receive combining (RC), transmit diversity (TD), and beamforming (BF) are employed, respectively. Based on the analysis of the packet error rate (PER) under the highly correlated maritime wireless channel model, we select the efficient multiple antenna schemes for SANET to improve the link reliability. In addition, the optimal MCS levels for the single-carrier (SC) SANET with the bandwidth of 25 kHz, and the multi-carrier (MC) SANET with the bandwidth of 50 kHz and 100 kHz are finalized.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1785-1796
• /
• 2015

In this paper, we investigate achieving the full diversity order and power gains in case of using OSTBCs and quasi-OSBCs in the x channel system with interference alignment with more than 2 antennas at each terminal. A slight degradation is remarked in the case of quasi-OSTBCs. In terms of receiver structure, we show that due to the favorable structure of the channel matrices, the simple zero-forcing receiver achieves the full diversity order, while the interference cancellation receiver leads to degradations in performance. As compared to the conventional scheme, simulation results demonstrate that our proposed schemes achieve 14dB and 16.5dB of gain at a target bit error rate (BER) of 10^-4 in the case of OSTBCs with 3 and 4 antennas at each terminal, respectively, while achieving the same spectral efficiency. Also, a gain of 10dB is achieved at the same target BER in the case of quasi-OSTBC with 4 antennas at each terminal.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1504-1526
• /
• 2018

For uplink multi-user massive MIMO systems, conventional minimum mean square error (MMSE) linear detection method achieves near-optimal performance when the number of antennas at base station is much larger than that of the single-antenna users. However, MMSE detection involves complicated matrix inversion, thus making it cumbersome to be implemented cost-effectively and rapidly. In this paper, we first summarize in detail the state-of-the-art simplified MMSE detection algorithms that circumvent the complicated matrix inversion and hence reduce the computation complexity from ${\mathcal{O}}(K^3)$ to ${\mathcal{O}}(K^2)$ or ${\mathcal{O}}(NK)$ with some certain performance sacrifice. Meanwhile, we divide the simplified algorithms into two categories, namely the matrix inversion approximation and the classical iterative linear equation solving methods, and make comparisons between them in terms of detection performance and computation complexity. In order to further optimize the detection performance of the existing detection algorithms, we propose more proper solutions to set the initial values and relaxation parameters, and present a new way of reconstructing the exact effective noise variance to accelerate the convergence speed. Analysis and simulation results verify that with the help of proper initial values and parameters, the simplified matrix inversion based detection algorithms can achieve detection performance quite close to that of the ideal matrix inversion based MMSE algorithm with only a small number of series expansions or iterations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.7 s.98
• /
• pp.709-719
• /
• 2005

The forward link of the 3 G CDMA system may become limited under the increasing of the number of users. The conventional channelization code, Walsh code, has not enough sizes for much possible non, therefore, the quasi orthogonal function(QOF), which process optimal cross-correlation with Walsh code, is considered. In this paper, we investigate quasi orthogonal function on Jacket matrices, which can lead lower correlations values and better performance in 3 G CDMA system. Moreover, to simple the detector and improve the BER performance, a novel detection for QOF CDMA system is proposed. Finally, the simple recursive generation of the bent sequences for QOF mask function is discussed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.660-669
• /
• 2010

In this paper, a multiple antenna system for next generation mobile applications is proposed. The proposed MIMO antenna consists of two parallel folded monopole antennas with the length of 100 mm and spacing of 6 mm and a decoupling network which locates at the top side of a mobile handset. In order to improve the isolation characteristic at the LTE band 13, a decoupling network was added between the two antenna elements placed close to each other. The decoupling network, consisting of two transmission lines, a shunt reactive component and common ground line, is simple and compact. To obtain the wide bandwidth characteristic, an wide folded patch structure generating the strong coupling between feeding and shorting lines through the slit is used at the bottom side of a mobile handset. Also, the performance of a multiple antenna system composed of three antenna elements is analyzed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.2
• /
• pp.95-101
• /
• 2011

In wireless X networks where all transmitters send the independent messages to all receivers, the theoretical bound on the degrees of freedom (DOF) and interference alignment (IA) scheme for its achievability are given by Cadambe and Jafar [1]. However, IA scheme for wireless X network may be infeasible in practice unless the transmitters have the perfect channel information. In addition, if the transmitter with single antenna uses time-varying channel coefficients as a beamforming vector, the infinite channel extension is required to achieve the theoretical bound on the DOF of wireless X networks with perfect IA scheme. In this paper, we consider K-user MIMO X network where K transmitters and K receivers have M antennas each. While the beamforming vectors have been constructed with multiple channel uses over multiple time slot in the earlier work, we consider the beamforming vectors constructed only by a spatial signature over unit time. Accordingly the channel information at the transmitters can be available instantaneously. Then we propose the perfect IA scheme with no channel extension. Based on our sum-rate analysis and the simulation results, we confirm that our proposed scheme can achieve MK/2 DOF which is quite close to the theoretical bound on the DOF region of wireless X networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1098-1112
• /
• 2018

Achievable sum rate and energy efficiency (EE) are investigated for the massive multiple-input multiple-output (Massive MIMO) downlink with channel aging in the time varying Ricean fading channel. Specifically, the expression of the achievable sum rate of the system for the maximum ratio transmission (MRT) precoder with aged channel state information (CSI) in the time varying Ricean fading channel is first presented. Based on the expression, the effect of both channel aging and the Ricean factor on the power scaling law are studied. It is found that the transmit power of base station (BS) is scaled down by $1/{\sqrt{M}}$(where M is the number of the BS antennas) when the Ricean factor K is equal to zero (i.e., time varying Rayleigh fading channel), indicating that aged CSI does not affect the power scaling law. However, the transmit power of the BS is scaled down by 1/M for the time varying Ricean fading channel (where $K{\neq}0$) indicating that the Ricean factor affects the power scaling law and sum rate, and channel aging only leads to a reduction of the sum rate. Second, the EE of the system is analyzed based on the general power consumption model. Both the theoretical analysis and the simulations show that the channel aging could degrade the sum rate and the EE of the system, and it does not affect the power scaling law.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.29-34
• /
• 2008

In this paper, we propose the channel sounding scheme which improves the reliability and performance of communication link and mitigate the fading effect of channel in MTMO-OFDM system having correlation between Tx and Rx antennas. And we estimate the channel propagation characteristics of channels between the transmitter and receiver with CS scheme by measuring the channel propagation characteristics using sounding signal. Multi agent system models can be used to analyze the path of the system within any time frame. Further, using this proposed method, we can increase the channel capacity by simple calculation in receiver and transmitter and allocate the optimal power by channel information in transmitter. Also, the increment of channel capacity using the prorposed method is induced as the number of antenna is increased. So, we can anticipate the performance improvement with the presented scheme in more complicated Tx and Rx antenna system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.4
• /
• pp.23-31
• /
• 2018

This paper presented the implementation and design of the 2T-2R wireless HD video streaming systems over 1.7 GHz frequency band using 3GPP LTE-TDD standard on NI USRP RIO SDR platform. The baseband of the system used USRP RIO that are stored in Xilinx Kintex-7 chip to implement LTE-TDD transceiver modem, the signal that are transmitted from USRP RIO up or down converts to 1.7 GHz by using self-designed 1.7 GHz RF transceiver modules and it is finally communicated HD video data through self-designed 2x9 sub array antennas. It is that communication method between USRP RIO and Host PC use PCI express x4 to minimize delay of data to transmit and receive. The implemented system show high error vector magnitude performance above 32 dBc and to transmit and receive HD video in experiment environment anywhere. The proposed hybrid beam forming system could be used not only in the future 5G mobile communication systems under 6 GHz frequency band but also in the systems over 6 GHz frequency band like ones in mmWave frequency bands.