• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1458-1470
• /
• 2018

In this letter, a new dual-port Multiple-Input Multiple-Output (MIMO) antenna is introduced which has two independent signal feeding ports in a single antenna element to achieve smaller antenna volumes for the 5G mobile applications. The dual-port structure is implemented by adding a cross coupled semi-loop (CCSL) antenna as the secondary radiator to the ground short of inverted-F antenna (IFA). It is found that the port to port isolation is not deteriorated when an IFA and CCSL is combined to form a dual-port structure. The isolation property of the proposed antenna is compared with a polarization diversity based dual-port antenna proposed in the literature [9]. The operating frequency range is 3.3-4.0 GHz which is suitable for places where $4{\times}4$ MIMO systems are supposed to be deployed such as in China, EU, Korea and Japan at the band ${\times}$ (3.3 - 3.8GHz. The measured 6-dB impedance bandwidths of the proposed antennas are larger than 700 MHz with isolation between the feeding ports higher than 18 dB [1-2]. The simulation and measurement results show that the proposed antenna concept is a very promising alternative for 5G mobile applications.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.10
• /
• pp.1338-1343
• /
• 2018

MIMO(Multiple Input Multiple Output) slot antenna that operates on the dual WiFi band(2.401~2.495GHz, 5.18~5.825GHz), in this paper, was studied. The basic theory for the slot design is based on the coupling between adjacent slot, and slots are fed by the each microstrip lines. Two slot antennas for the MIMO operation are located on the left and the right side of top of the metal notebook, and grounds between a notebook and two microstrip feeding lines are connected. Measurement of return loss showed under -6dB on entire design band, and isolation was below than -30dB. Radiation efficiency, average gain and peak gain for the left and the right slot were measured in the anechoic chamber, and showed good performances as 57.25%, -2.42dBi, 5.64dBi and 55.35%, -2.61dBi, 6.42dBi for the 2.4GHz band and 55.89%, -2.58dBi, 7.3dBi and 53.79%, -2.8dBi, 7.54dBi for the 5GHz band.

• Journal of electromagnetic engineering and science
• /
• v.15 no.3
• /
• pp.185-193
• /
• 2015

In this paper, a hybrid multiple input multiple output (MIMO) antenna for eight-band mobile handsets is designed and implemented. For the MIMO antenna, two hybrid antennas are laid symmetrically and connected by an interconnection tie, thereby enabling complementary operation. The tie affects both the impedance and radiation characteristics of each antenna. Further, printed circuit board (PCB) embedded type is applied to the antenna design. To verify the results of this study, we designed eight bands-LTE class 12, 13, and 14, CDMA, GSM900, DCS1800, PCS, and WCDMA-and implemented them on a bare board the same size as the real board of a handset. The voltage standing wave ratio (VSWR) is within 3:1 over the entire design band. Antenna isolation is less than -15 dB at the lower band, and -12 dB at the WCDMA band. Envelope correlation coefficient (ECC) of 0.0002-0.05 is obtained for all bands. The average gain and efficiency are measured to range from -4.69 dBi to -2.88 dBi and 33.99% to 51.5% for antenna 1, and -4.74 dBi to -2.97 dBi and 33.45% to 50.49% for antenna 2, respectively.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.909-914
• /
• 2005

This paper proposes an efficient antenna selection scheme for PRT (Personal Rapid Transit) remote control in a wireless MIMO-OFDM systems. Using high correlation among neighboring sub-carriers, transmit antennas are selected by calculation based on the channel response of the center sub-carrier in each subgroup. This scheme reduces complexity of selection algorithm and significantly reduces the feedback channel information with small performance degradation. Especially, when feedback channel rate between a control base and a train is fixed, the proposed scheme can provide a significant advantage in high mobility.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.99-105
• /
• 2012

Recently, there are many user selection algorithms in multi user multiple-input multiple-output (MU-MIMO) systems. One of well-known user selection methods is Semi orthogonal user selection (SUS). It is an algorithm maximizing channel capacity. However, it is applicable only when user's antenna is one. We propose a generalized user selection algorithm regardless of the number of user's antennas. In the proposed scheme, Base station (Bs) selects the first user who has the highest determinant of channel and generates a user group that correlation with first user's channel is less than allowance of correlation. Then, each determinant of channels made up of first user's channel and a user's channel in the generated group is calculated and BS selects the next user who has the highest determinant of that. BS selects following users by repeating above procedure. In this paper, we get better performance because of selecting users who have the highest determinant of channel as well as allowance of correlation optimally calculated through matrix operations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.386-393
• /
• 2010

In this paper, we analyse HARQ scheme that utilizes symbol mapping diversity (SMD) techniques such as MDSM and CORE. The exploitation feasibility of MDSM and CORE is evaluated in the perspective of system complexity and storage capacity as we consider a BICM system based on 3GPP LTE standards and multipath fading channels. Also, a simple method which obtains SMD effects by circularly shifting bit-block in a codeword is proposed. The experimental results performed in BICM-OFDM systems with single antenna as well as multiple antennas show that frame error rate of the proposed method is close to that of CORE while having lower complexity.

• Journal of electromagnetic engineering and science
• /
• v.11 no.2
• /
• pp.113-121
• /
• 2011

Multiple-input multiple-output with orthogonal frequency division multiplexing technology (MIMO-OFDM) is considered to be the ultimate solution for increasing system throughput and for enhancing communication reliability. In this paper, we propose to increase the uplink (UL) throughput by assigning the same UL resources to multiple single-antenna mobile stations. This leads to the loss of orthogonality among sub-carriers. Thus, at the base station (BS), MIMO-OFDM detection techniques are used to separate the streams of different users assigned the same UL resources. To obtain a realistic performance evaluation, different channel scenarios are applied with different correlation values among the antennas of the users. Simulation results show that the proposed MIMO-OFDM system linearly increases the uplink capacity of the OFDM system while maintaining a mobile station transmitter as simple as that used in a conventional OFDM system. For instance, when 4 users are assigned the same UL resources, the throughput of the proposed system is 3.07 times that achieved by a conventional single input single output OFDM system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4390-4407
• /
• 2019

The paucity of pilot signals in Massive MIMO system is a vital issue. To accommodate substantial number of users, pilot signals are reused. This leads to interference, resulting in pilot contamination and degrades channel estimation at the Base Station (BS). Hence, mitigation of pilot contamination is exigency in Massive MIMO system. The proposed Time Shifted Pilot Signal Transmission with Pilot signal Hopping (TSPTPH), addresses the pilot contamination issue by transmitting pilot signals in non-overlapping time interval with hopping of pilot signals in each transmission slot. Hopping is carried by switching user to new a pilot signal in each transmission slot, resulting in random change of interfering users. This contributes to the change in channel coefficient, which leads to improved channel estimation at the BS and therefore enhances the efficiency of Massive MIMO system. In this system, Uplink Signal Power to Interference plus Noise Power Ratio (SINR) and data-rate are calculated for pilot signal reuse factor 1 and 3, by estimating the channel with Least Square estimation. The proposed system also reduces the uplink Signal power for data transmission of each User Equipment for normalized spectral efficiency with rising number of antennas at the BS and thus improves battery life.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.4
• /
• pp.1330-1350
• /
• 2022

As a preprocessing operation of transmitter antennas, the hybrid precoding is restricted by the limited computing resources of the transmitter. Therefore, this paper proposes a novel hybrid precoding that guarantees the communication efficiency with low complexity and a fast computational speed. First, the analog and digital precoding matrix is derived from the maximum eigenvectors of the channel matrix in the sub-connected architecture to maximize the communication rate. Second, the extended power iteration (EPI) is utilized to obtain the maximum eigenvalues and their eigenvectors of the channel matrix, which reduces the computational complexity caused by the singular value decomposition (SVD). Third, the Aitken acceleration method is utilized to further improve the convergence rate of the EPI algorithm. Finally, the hybrid precoding based on the EPI method and the Aitken acceleration algorithm is evaluated in millimeter-wave (mmWave) massive multiple-input and multiple-output (MIMO) systems. The experimental results show that the proposed method can reduce the computational complexity with the high performance in mmWave massive MIMO systems. The method has the wide application prospect in future wireless communication systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.7
• /
• pp.2027-2046
• /
• 2024

Reconfigurable Intelligent Surface (RIS) is an innovative technique to precisely control the phase of incident signals with the help of low-cost passive reflective elements. It shows excellent potential in the sixth generation of mobile communication systems, which not only extends wireless coverage but also boosts channel capacity. Considering that multipath propagation and a high number of antennas are involved in RIS in assisted mega multiple-input multiple-output (MIMO) systems, it suffers from severe channel fading and multipath effects, which in turn lead to signal instability and degradation of transmission performance. To overcome this obstacle, this essay suggests an improved gradient optimization algorithm to dynamically and optimally adjust the phase of the reflective elements to counteract channel fading and multipath effects as a strategy. In order to overcome the optimization problem of falling into local minima, this paper proposes an adaptive learning rate algorithm based on Adagrad improvement, which searches for the global optimal solution more efficiently and improves the robustness of the optimization algorithm. The suggested technique helps to enhance the estimate of channel efficiency of RIS-assisted large MIMO systems, according to simulation results.