• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.690-699
• /
• 1998

This paper discusses the techniques, procedures and the results of the ground vibration test(GVT) performed on the development aircraft and the simple procedure of FE model updating technique from the GVT results. The GVT was carried out using random excitation technique with MIMO(Multi-Input-Multi-Output) data acquistion method, and taking full advantage of poly-reference global parameter estimation technique to identify the vibration modes. In dynamic FE modeling, the aircraft was represented by beam elements and all dynamic analysis was performed using MSC/NASTRAN for this model. In updating procedure, the stiffness of the beam model was adjusted iteratively so as to get the natural frequencies and mode shapes close to the GVT results.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.3
• /
• pp.171-180
• /
• 2014

In this paper, a multiple sliding surface (MSS) controller for a twin rotor multi-input-multioutput system (TRMS) with mismatched model uncertainties is proposed. The nonlinear terms in the model are regarded as model uncertainties, which do not satisfy the standard matching condition, and an MSS control technique is adopted to overcome them. In order to control the position of the TRMS, the system dynamics are pseudo-decomposed into horizontal and vertical subsystems, and two MSSs are separately designed for each subsystem. The stability of the TRMS with the proposed controller is guaranteed by the Lyapunov stability theory. Some simulation results are given to verify the proposed scheme, and the real time performances of the TRMS with the MSS controller show the effectiveness of the proposed controller.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.7 s.361
• /
• pp.47-52
• /
• 2007

This paper analyzes the output signal-to-interference-plus-noise ratio (SINR) for a multiple-input-multiple-output (MIMO) multicarrier code division multiple access (MC-CDMA) system with minium mean square error receivers in multi-cell environments. A previous work in single cell environments is extended into analysis in multi-cell environments. The use of Haar unitary code matrix for asymptotic analysis causes other cell interferences expressed with a diagonal matrix haying different diagonal values. This paper shows that other cell interferences converge to an identity matrix whose gain is expressed by only other cell interference power in mean square sense and finds asymptotic deterministic SINRs for a given other cell interference. Under the assumption that the sum of lognormal fading components is distributed by other lognormal function, we show the comparison between theoretical performances and simulations from the view point of bit error rate and present average throughput performance according to the cell radius.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1022-1030
• /
• 2004

The next generation cellular radio systems require high data rate transmission and large system capacity In order to meet these requirements, multiple antennas can be used at the base and mobile stations, forming MIMO(multiple-input, multiple-output) channels This paper considers a downlink MIMO system assuming a large number of base station antennas, a small number of mobile station antennas, and rich-scattering, quasi-stationary, and flat-fading channel environments When the channel state information is given at the base station in a single user system, a MIMO technique with SVD(singular value decomposition) and water-filling can achieve the maximal downlink channel capacity. In multi-user environments, however, SDMA(space division multiple acces) technique can be used to further increase the total channel capacity supported by the base station This paper proposes a MIMO SDMA technique which can transmit parallel data streams to each of multiple users. The proposed method. can achieve higher total channel capacity than SVD-based MIMO techniques or conventional SDMA using smart antennas.

• Journal of KIISE:Information Networking
• /
• v.41 no.4
• /
• pp.192-201
• /
• 2014

User scheduling boosts the Multi-User Multi-Input Multi-Output (MU-MIMO) gain by selecting an optimal set of users to increase the 802.11 Wi-Fi system capacities. Many kinds of user scheduling algorithms, however, fail to realize the advantages of MU-MIMO due to formidable Channel State Information (CSI) overhead. In this paper, we propose a user scheduling method considering such CSI exchange overhead and its MAC protocol, called ACE (Active CSI Exchange based User Scheduling for MU-MIMO Transmission). Unlike most proposals, where user scheduling is performed after an Access Point (AP) receives CSI from all users, ACE determines the best user set during the CSI exchange phase. In particular, the AP broadcasts a channel hint about previously scheduled users, and the remaining users actively send CSI reports according to their Effective Channel Gains (ECGs) calculated from the hint. Through trace-driven MATLAB simulations, we prove that the proposed scheme improves the throughput gain significantly.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2006

This paper presents the modeling and multivariable feedback control of a novel high-precision multi-dimensional positioning stage. This integrated 6-degree-of-freedom. (DOF) motion stage is levitated by three aerostatic bearings and actuated by 3 three-phase synchronous permanent-magnet planar motors (SPMPMs). It can generate all 6-DOF motions with only a single moving part. With the DQ decomposition theory, this positioning stage is modeled as a multi-input multi-output (MIMO) electromechanical system with six inputs (currents) and six outputs (displacements). To achieve high-precision positioning capability, discrete-time integrator-augmented linear-quadratic-regulator (LQR) and reduced-order linearquadratic-Gaussian (LQG) control methodologies are applied. Digital multivariable controllers are designed and implemented on the positioning system, and experimental results are also presented in this paper to demonstrate the stage's dynamic performance.

• Journal of Communications and Networks
• /
• v.13 no.3
• /
• pp.232-239
• /
• 2011

This paper investigates the user selection problem of successive zero-forcing precoded multiuser multiple-input multiple-output (MU-MIMO) downlink systems, in which the base station and mobile receivers are equipped with multiple antennas. Assuming full knowledge of the channel state information at the transmitter, dirty paper coding (DPC) is an optimal precoding strategy, but practical implementation is difficult because of its excessive complexity. As a suboptimal DPC solution, successive zero-forcing DPC (SZF-DPC) was recently proposed; it employs partial interference cancellation at the transmitter with dirty paper encoding. Because of a dimensionality constraint, the base station may select a subset of users to serve in order to maximize the total throughput. The exhaustive search algorithm is optimal; however, its computational complexity is prohibitive. In this paper, we develop two low-complexity user scheduling algorithms to maximize the sum rate capacity of MU-MIMO systems with SZF-DPC. Both algorithms add one user at a time. The first algorithm selects the user with the maximum product of the maximum column norm and maximum eigenvalue. The second algorithm selects the user with the maximum product of the minimum column norm and minimum eigenvalue. Simulation results demonstrate that the second algorithm achieves a performance similar to that of a previously proposed capacity-based selection algorithm at a high signal-to-noise (SNR), and the first algorithm achieves performance very similar to that of a capacity-based algorithm at a low SNR, but both do so with much lower complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9A
• /
• pp.673-678
• /
• 2009

This paper presents a feedback method for improving the system capacity of MU-MIMO system for downlink channel environments. In a typical conventional feedback method, CVQ, in order to enhance the channel capacity, not only the feedback load is increased but also the quantization of the channel vector is increased, because the channel parameter of each user has to be fed back after quantizing one of the pre-defined N-codebook vectors. In this paper, a novel feedback method is proposed which provides an improved system capacity by transferring the channel state information without increasing the feedback load. Performance of the proposed method is compared to the conventional CVQ method through computer simulations. The simulation results show that the proposed method with 3-bit feedback provides a system capacity comparable to the CVQ method of 6-bit feedback when the number of transmit antennas is 2.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.7
• /
• pp.737-746
• /
• 2014

Recently, researches about MIMO(Multi-Input Multi-Output) system are being studied actively due to high-capacity and high-speed communication. However, MIMO system has many RF(Radio Frequency) chains according to many array antennas. So, MIMO system has disadvantages such as high-complexity and high-power-consumption. Also, it is impossible to miniaturize the antenna dimension. In order to solve these problems, beamspace MIMO system using ESPAR(Electronically Steerable Parasitic Array Radiator) antenna was proposed. It is possible to reduce the complexity and the power-consumption, because it has single RF chain by using one active antenna and several parasitic elements. In this paper, in order to improve the security, for the first time, chaos communication algorithm is applied to QPSK modulated beamspace MIMO system using ESPAR antenna. We define as chaos QPSK beamspace MIMO system, and evaluate the SER performance. Also, we confirm that QPSK symbols can be made by changing the reactance values of parasitic elements, and evaluate the SER performance of this system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.123-129
• /
• 2023

MIMO antenna is a field in which various researches have been actively conducted for a long time, and its design concept is universally well known. However, Unlike conventional MIMO antennas, MIMO antennas for autonomous driving radars, which have recently been attracting attention, are designed in W-band which is a millimeter wave band, and must also meet novel design conditions to satisfy the performance of autonomous driving radars. Therefore, a novel and different approach is required for the design and beam pattern verification of the MIMO antenna for autonomous driving radar. In this paper, a MIMO antenna is designed and the design process to satisfy the conditions of a W-band autonomous driving radar is introduced, and proposes a beam pattern verification method for a W-band MIMO antenna mounted on an autonomous driving radar system.