• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1197-1200
• /
• 2014

Two test standards to be applied for evaluating shielding effectiveness of HEMP protection facilities, MIL-STD-188-125-1 and IEEE std. 299, provide different test results in spite of the same facility. In particular, at the frequency range of 10 kHz~20 MHz, it is confirmed that the test results by the IEEE Std. 299 are about 20~30 dB lower than the evaluated results by MIL-STD-188-125-1. These results are due to the different measurement conditions specified in the two test standards. Therefore, IEEE Std. 299 can be applied for the shortening of test distance, but the required SE performance based on MIL-STD-188-125-1 must be modified.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2477-2480
• /
• 2014

Thermal degradation of titanium-containing metal-organic frameworks (MOFs; MIL-125 and MIL-125-$NH_2$ at $350^{\circ}C$ for 6 h in air produced $TiO_2$ nanoparticles of ca. 10 nm in diameter. Scanning electron and transmission electron microscope analyses indicated that those nanoparticles were aggregated randomly within each crystalline particle of their MOF precursors. The $TiO_2$ nanoparticles prepared from MIL-125-$NH_2$ exhibited higher activity for the degradation of 4-chlorophenol under visible light.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.4
• /
• pp.320-323
• /
• 2019

This paper examines a disadvantage of low-frequency magnetic shielding measurement based on MIL-STD-188-125-1. A rectangular loop antenna is proposed as an improvement over conventional circular loop antennas for measuring magnetic shielding. Simulation and experiment are used to demonstrate that the proposed rectangular loop outperforms the circular loop for a more reliable shielding measurement at low frequency range.

• Journal of Korean Society for Quality Management
• /
• v.24 no.1
• /
• pp.110-125
• /
• 1996

Since 1975, Korean defence quality system has been operated by adopting defence specifications, 0050-0015, 0050-0029 and 0050-0030, which were based on the American specifications, MIL-Q-9858, MIL-Q-45208 and MIL-STD-45662. The trend that the ISO certification is intensively required for the international trade, and the need for modernization of the Korean military forces, however, provide motivation to revise the defence quality system. In this study, an improved defence quality system has been proposed by the comparison study among the requirements prescribed in ISO 9000, AQAP 100 series, MIL-Q-9858.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.47-52
• /
• 2016

This paper covers the importance of a dedicated Power Line Filter implementation against HEMP(High altitude ElectroMagnetic Pulse) threats caused by high altitude nuclear detonations. As the PCI test results for E1 short pulse with 2500[A], only HEMP filter obtained the required residual current around 8[A], but others didn't meet below 10[A] on MIL-STD-188-125 PCI regulation. Consequently, the development of a dedicated power line filter turned out to be a essential element in order to protect the power related system against HEMP transient.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.108-125
• /
• 2014

현재 국방부는 주요 핵심 시설에 대해 EMP 방호 시설 건설 사업을 추진하고 있으며, 향후 더욱 많은 방호 시설 확보 계획을 가지고 있다. EMP 방호 시설은 장비 운용 중 방호 성능이 감소하여도 감소 현상을 알지 못하다가 EMP 공격을 받게 되면 그때 문제가 발생하게 된다. 따라서 EMP 방호 시설에 대한 정비 유지는 매우 중요하며, 방호 시설에 대한 성능 감소 여부를 평상시에도 확인할 수 있는 체계적이고, 현실적인 정비 유지 기법이 요구된다. 본 논문에서는 EMP 방호 시설 정비 유지에 필요한 정비 유지 기법을 미국 EMP 방호 시설 군사 규격 MIL-STD-188-125의 정비 유지 요구사항을 기준으로 구체적으로 작성하였으며, 실제 EMP 방호 시설 정비 유지에 쉽게 활용할 수 있도록 노력하였다. 주요 내용은 EMP 방호 시설에 대한 정비 개념, 정비 매뉴얼 구성, 정비 유지 단계(예방 정비, 고장 정비, 창 정비)의 업무, 교육/훈련 내용으로 구성되어 있다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.20-21
• /
• 2016

In this study, the shielding properties of concrete with conductive materials as shielding material for electromagne- tic pulse(EMP) within 10kHz~18GHz were investigated. The shielding effectiveness of specimens were compared with different entrained materials. The shielding effectiveness were determined according to MIL-STD-188-125-1, IEEE-STD-299 at 28 days of concrete curing. The results of shielding effectiveness did not meet the criteria(80dB) severely.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.41-42
• /
• 2016

In this study, the basic properties of concrete with entrained materials as shielding material for electromagnetic pulse(EMP) within 10kHz~1GHz were investigated. The concretes of moderate strength were prepared with different entrained materials. The shielding effectiveness will be determined according to MIL-STD-188-125-1 at 28 days of concrete curing. The results of physical properties were all satisfied of setting criteria.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.50-51
• /
• 2018

In this study, it evaluate the electromagnetic pulse shielding performance of amorphous metallic fiber reinforced cement composite with other steel fiber reinforced cement composite. Hooked-ended steel fiber, smooth steel fiber and amorphous metallic fiber were reinforced 2.0 vol.% in cement composites respectively. The electromagnetic pulse shielding performance was evaluated by MIL-STD-188-125-1. As a result, shielding performance of amorphous metallic fiber reinforced cement composite was higher than Hooked-ended and smooth steel fiber reinforced cement composites. In addition, the relationship between the electrical conductivity and the electromagnetic pulse shielding performance of the cement composite was confirmed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.3
• /
• pp.241-245
• /
• 2019

This work presents the response characteristics of a ZnO varistor to conductive EMP. An E1 pulse, standardized to MIL-STD-188-125-1, was applied to the varistors wherein the residual current and response times were measured with the applied E1 pulse current. Additionally, the response time was measured according to the length of the connection path. Consequently, the amplitude of the residual voltage through the ZnO varistors was increased with increasing amplitude of the applied E1 pulse current. As the length of the connection path increased, the operating response time and residual peak voltage also increased. These results indicate that the response characteristics of ZnO varistors can be applied to basic data to support the use of varistors as a protective measure against conductive EMP.