• Economic and Environmental Geology
• /
• v.21 no.2
• /
• pp.149-164
• /
• 1988

Electrum-sulfide mineralization of the Samgwang and Sobo mines of the Cheongyang Au-Ag area was deposited in two stages of quartz and calcite veins that fill fault zones in granite gneiss. Radiometric dating indicates that mineralization is Early Cretaceous age (127 Ma). Fluid inclusion and sulfur isotope data show that ore mineralization was deposited at temperatures between $340^{\circ}$ and $180^{\circ}C$ from fluids with salinities of 1 to 8 wt. % equiv. NaCl and a ${\delta}^{34}S_{{\sum}S}$ value of 2 to 5 per mil. Evidence of fluid boiling (and $CO_2$ effervescence) indicates a range of pressures from < 200 to $\approx$ 700 bars, corresponding to depths of ${\approx}1.5{\pm}0.3\;km$ in a hydrothermal system which alternated from lithostatic toward hydrostatic conditions. Au-Ag deposition was likely a result of boiling coupled with cooling. Meaured and calculated hydrogen and oxygen isotope values of ore-forming fluids indicate a significant meteoric water component, approaching unexchanged paleometeoric water values. Comparison of these values with those of other Korean Au-Ag deposits reveals a relationship among depth, Au/Ag ratio and degree of water-rock interaction. All investigated Korean Jurassic and Cretaceous gold-silver-bearing deposits have fluids which are dominantly evolved meteoric waters, but only deeper systems (${\geq}1.5\;km$) are exclusively gold-rich.

• Journal of Society of Preventive Korean Medicine
• /
• v.5 no.2
• /
• pp.40-68
• /
• 2001

In this study, grade of subjective symptom appealed by laborer of Jeollabuk-do was evaluated using questionary regarding factor made effect on musculoskeletal disease and in addition, studied relationship with health promotion life style of them. Based on the result, relationship of general characteristics of musculoskeletal subjective symptom and life-style of the subjects was concluded as below. 1. General characteristics of study subjects were as following. Ratio of male was higher as 57.7% of male and 42.2% female and age distribution was 5.1% of 20s, 34.99% of 30s, 36.3% of 40s and 23.7% of 50s and therefore, $30{\sim}40$ aged groups showed highest ratio. Most subjects (74.9%) was married status and in case of education level, high-school graduate and dropout (23.3%) and over-college graduate (46.8%) showed highest distribution. $1{\sim}2$ Mil. KRW (29.5%) and $2{\sim}2.99$ Mil. KRW (21.2%) is the main income distribution and however there was high ratio of non-reply (29.0%). In case of employment period, $10{\sim}14$ years (15.3%) and over 15 years (29.6%) showed highest ratio and there were many non-reply (39.4%) and in addition, 67.6% replied as own house and 14.3% as lease on deposit base in question of residence type. 2. Subjects showed high ratio of subjective symptom appeal of 62.79% and many cases (50.23%) appealed 1 or 2 symptoms. Symptom by body region was 29.8% (waist), 27% (shoulder), 21.2% (knee), 15.5% (neck), 9.5% (ankle), 8.1% (wrist) and 5.0% (elbow) in order. In case of relationship with general characteristics, female comparing with male, non-residence of own house, subjects with lower education level and employment period of $10{\sim}14$ years showed higher appeal rate and kind of symptoms than others. Therefore, it was concluded that rate of musculoskeletal symptom appeal have close relationship with gender, level of living, education level, age and employment period. 3. In case of severe pain of upper body except waist and ankle, it was appealed in both or right side and it means that upper body pain is originated from right side and right region pain is transited to both region pain. In addition, there was 39.41% of non-reply to existence of right-left region pain and therefore, it was evaluated that, in may cases, there was no awareness of their own symptom condition even on subjective symptom. 4. Degree of pain was, as pain over middle level, evaluated as 2.79 on full mark of 4.0 and in order of waist (2.97), ankle (2.83), knee (2.82), wrist (2.82), neck (2.79), shoulder (2.70) and elbow (2.62). In addition, 71.97% appealed $2{\sim}3$ cases for the latest 1 week. Owing to subjective symptom, 54.95% drop into hospital or pharmacy, 10.32% made temporary retirement or absence, 7.99% transferred into more comfortable duty and $39.4{\sim}54%$ experienced one or more managing mentioned above. 5. Fulfillment of health promotion life style of subjects was evaluated on full mark of 4.0 and total score was 2.63. Average mark of each area was personal relationship (3.05), self-realization (2.92), stress management (2.63), health control (2.48), physical exercise (2.19) and nutrition management (2.19) and personal relationship was highest and physical exercise and nutrition management were lowest. As general characteristics influencing health promotion life style, gender, residence style and employment period showed significant difference. Male showed higher mark than female and showed higher mark in order of own house, others, lease on deposit base, monthly rent. Subjects with longer employment period showed higher mark with significant difference. 6. Accounting of factor influencing each area of health promotion life style, self-realization showed significance in marriage status, income, residence style and education level and health control in age, residence style and employment period. Physical exercise showed significant difference in gender, age, residence style and employment period and nutrition in gender, age, residence style and employment period. Stress management showed significant difference in residence style and employment period and however not in personal relationship. 7. Health promotion life style relating with existence and kind of pain showed significant difference in all area except personal relationship area. In absence of pain, there was statistically significant high score in all area even in total health promotion life style and all area. Accounting of kind of pain, cases of $1{\sim}2$ kinds of pain and $5{\sim}6$ kinds of pain showed relatively high score and it was lower than mark of subject stated absence of pain. 8. Subjects appeal symptom were classified by symptom region and difference of total and each areas were evaluated. General area (p=0.002), self-realization (p=0.012), health management (p=0.023), physical exercise (p=0.028), nutrition management (p=0.028) and stress control (p=0.001) showed statistically significant difference and not in personal relationship area. Especially, elbow, shoulder and neck area marked high and group appealed pain of knee, arm and elbow, foot and ankle marked low. Based on those results, subjective symptom should be accounted seriously in diagnosis of occupational musculoskeletal disease of laborer and among subjective symptom, general characteristics of gender, age, condition of living, education level and employment period make effect. Generally subject appeal symptom marked lower than subject without symptom appeal and it means that life management of subject appealing musculoskeletal pain make important role in management and treatment of occupational musculoskeletal disease.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1642-1648
• /
• 2017

Ultra-wideband antennas are desired for several applications including satellite communications, radars, remote sensing system, telescopes, and microwave imaging systems. There are many types of wideband antenna structures, but the tapered slot Vivaldi antenna is advantageous in terms of cost, weight, scan angle capabilities, end-fire radiation, and ease of feeding and system integration. In this paper, a modified antipodal Vivaldi antenna is presented. A novel AVA with H-shaped parasitic patches has the capacity to improve the radiation characteristics in the whole operation frequencies. A prototype of the modified antenna with RT/duroid 5880 substrate of a relative dielectric constant (${\epsilon}_r$) of 2.2, and a thickness of 31mil is fabricated and experimentally studied as well. It measures a ${\mid}S_{11}{\mid}$ of less than -10dB and gain of 9-12dBi over 7.8-52.5GHz which shows reasonable agreement with the simulated one.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.421-431
• /
• 2016

The purpose of this study was to identify the influence of depression, social isolation, and meaning in life on the swallowing related quality of life in patients with dysphagia. In this study, 87 the dysphagia patients diagnosed with stroke, degenerative disease, and neurological disorder in a general or rehabilitation hospital in Seoul, Gyeonggi, and Incheon were assessed. The data were collected between February and April, 2015 using CES-D, RULS, PIL, SWAL-QOL. The data were analyzed using descriptive statistics, t-test, ANOVA, Pearson's correlation, and stepwise multiple regression with SPSS 22.0. Of the participants, 20.7% reported having had depression, 92.0% middle-high social isolation and 64.4% existential vacuum. The mean scores were SWAL- QOL 158.89(35.97). Stepwise multiple regression revealed that tube feeding to have the greatest effect on SWAL-QOL(${\beta}=-0.57$, p<.001), followed in order by age (${\beta}=0.26$, p=.001), lower MIL (${\beta}=0.19$ p=.014), and education (${\beta}=0.17$, p=.032). The most influential factor to SWAL-QOL was tube feeding. These variables accounted for 50.7% of SWAL-QOL in dysphagia patients (F=28.84 p=.031). Therefore, it is essential to develop the intervention that can improve the meaning in life in patients with dysphagia. In addition there is a need to study the psychological factors and quality of life of tube feeding.

• Journal of Chest Surgery
• /
• v.30 no.10
• /
• pp.973-978
• /
• 1997

We reviewed data of 64 patients who underwent reoperation because of prosthetic valve malfunction from January 1991 to December 1995. The indications for reoperation were prosthetic valve failure(primary tissue failure: 53 patients, 82.8%), prosthetic valve thrombosis(6 patients, 9.4%), paravalvular leak(3 patients, 4.7%), prosthetic valve endocarditis(2 patients, 3.6%). Prosthetic valve failure developed most frequently in mitral portion(40 patients, 75%), prosthetic valve thrombosis also in mitral portion(4 patients, 67%), paravalvular leak significantly in aortic portio (3 patients, 100%). Explant period was longest in prosthetic valve failure(mean 107.4 $\pm$ 24.6 months), shortest in prosthetic valve endocarditis with prosthetic valve thrombosis(1 patient, 1 month). Mean explant period, defined as from first valve replacement operation to redo-valve replacement operatopn, was 109.2$\pm$ 10.7 months in mitral portion, 97.8$\pm$ 10.4 months in aortic portion, 109.5$\pm$ 10.4 months in total. Overall hospital mortality was 9.38%. The most common cause of death was the low cardiac output(4 patients), other causes were bleeding(1 patient), CNS injury(1 patient). Preoperative NYHA class IV(P=0.011), emergency operation(P=0.011), prosthetic valve endocarditis(P=0.001) were the independent risk factors, but age, sex, explant period, ACC time, double valve replacement, valve position, second reoperation did not appear to be significant risk factors. Mean follow up period was 28.8 $\pm$ 17.8 months. Actuarial survival at 3 year was 92.0$\pm$6.2%, 2 year event-free survival w s 84.3$\pm$6.1%. We propose that patients undergoing reoperation because of prosthetic valve failure are carfully controlled and selected in regarding to above mentioned risk factors NYHA class IV, emergency operation, prosthetic valve endocarditis in preoperative state. About other risk factors possible, there is necessary of following study.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.118-119
• /
• 2014

원전 운전 중 2차계통 구성재료가 부식되어 철 산화물이 증기발생기 내부로 유입된다. 유입된 철산화물은 고온고압의 환경에서 침적되어 슬러지가 된다. 침적된 슬러지는 증기발생기 전열관 재료에 응력부식균열(SCC)을 일으키는 주원인으로 원전에서는 철 산화물의 유입을 최소화하기 위해 기동전 2차계통을 순환 세정하고 있다. 해외 원전에서는 고분자 아크릴산(Polyacrylic Acid)을 순환세정시 주입함으로써 2차계통 철 산화물 제거 효율을 높인 사례가 있었다. 이에 우리 원전에서도 기동전 순환세정시 고분자 아크릴산을 주입 적용하였다. 고분자 아크릴산 주입 전 필수적으로 이뤄져야할 연구는 고분자 아크릴산이 재료에 미치는 영향평가이다. 본 연구에서는 고분자 아크릴산 농도(1, 10, 100 ppm)에 따라 2차계통 구성재료인 SA106 Gr.B와 Alloy 690의 건전성에 미치는 영향를 수행하였다. 평가방법으로는 전기화학 분극실험, 시편을 침지시켜 실험 전, 후 무게 감량을 이용한 부식률 측정, 표면 상태분석등을 이용하여 종합적으로 평가하였다. 전기화학 분극실험과 부식률 측정결과, 고분자 아크릴산 농도가 높을수록 부식은 증가하였고 고분자 아크릴산 농도 100 ppm일 때 최대 부식률이 0.037 mils로 계산되었다. 이는 부식허용 기준치(5.8 mils)보다는 100배이상 낮았으며 표면분석 결과 고분자 아크릴산으로 인한 pitting 부식은 발생하지 않았다. 이와 같은 결과로 기동시 환경에서 고분자 아크릴산 농도 100 ppm까지는 재료 건전성에 미치는 영향은 거의 없는 것으로 판단된다.

• Journal of the Korean Society of Tobacco Science
• /
• v.13 no.2
• /
• pp.5-20
• /
• 1991

For the quality enhancement of harvested-year leaf tobacco to the quality of 2-year naturally aged leaf tobacco, cellulose and nicotine degradative bacteria were isolated and identified. Effects of artificial fermentation treated cellulase and nicotine degradative bacteria on the quality of leaf tobacco were investigated from the chemical and sensory points of view. 1, Changes in chemical composition of leaf tobacco resulted from the addition of cellulase extracted from Cellulomonas sp. [3ml(${\mu}{\textrm}{m}$ D-glucose/ml. mil-1) of enzymes solution 11009 of leaf tobacco] and nicotine degradative bacteria, Pseudomonas sp. 2ml(IX109 cells$\div$ 100g of leaf tobacco), and subsequently fermented at 40${\mu}{\textrm}{m}$$^{\circ}C$, 65% R. H. for 40 days are as follows : 1) Content of crude fiber decreased 12% It took 9 min, 53 sec. to reach full combustion in control group but took only 7 min. 47 sec. in the treated group, taking almost equal time to 2-year naturally aged leaf tobacco(7 min. 35sec.). 2) Light intensity of control group was 60.96% with bright lemon color but that of treated leaf tobacco accounted for 47.69 with orange to dark brown color series, which was almost equal to the value, 45.69, of 2-year naturally aged leaf tobacco. 3) Linoleic acid, serving mild taste among organic acids, amounted to 1.llmg/g in control group but increased to 1.35m9/9 in the treated leaf tobacco, identical to the content(1.35mg/g) of 2-year naturally aged leaf tobacco. 4) Content of solanone, on of the typical leaf tobacco flavor compounds, accounted for 2.95% in control group but increased to 2.87% in treated group. 5) Methyl furan, useful flavor compound in smoke composition, accounted for 17.6$\mu\textrm{g}$/cig. in control group but increased to 25.9$\mu\textrm{g}$/cig. in treated group. However, acroleine decreased from 69.3$\mu\textrm{g}$/cig. in control group to 58.6$\mu\textrm{g}$/cig. in treated group 2. In sonsory test, mild taste evaluation of control group scored 5.47 and treated group 7.93 which was evaluted almost equal to the value(8.00) of 2-year naturally aged leaf tobacco. Aroma evaluation of control group scored 5.60, treated group 8.20, and 2-year naturally aged leaf tobacco 8.33. In addition, total harmony taste of control group showed 5.67, treated group 8.07 (p<0.01), and 2-year naturally aged leaf tobacco 8.00. From these results, it can be said that quality of treated leaf tobacco is not inferior to that 2-year naturally aged leaf tobacco.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• Journal of Korean Physical Therapy Science
• /
• v.10 no.2
• /
• pp.86-95
• /
• 2003

This study randomly chose 10 humanity high schools, which are located in Busan and KyoungNam province. We then examined the recognition rate of physical therapy among 378 teachers who were and still are working in the schools. 1. The recognition grade of physical therapeutics between men and women was significantly different with results of 80.7% of men and 69.7% of women(p<0.05). In the case of experiencing physical therapy, 83.6% of people said they knew the physical therapeutics and in the case of the opposite side, the result was also significantly different with a result of 67.8%(p<0.05). 2. We ranked the people on how much they knew about the physical therapeutics among men and women. With men, the actual experience of physical therapeutic came before what they heard from other people. In the case of women, what they heard from other people came first and the actual experience of physical therapeutic came after. According to the public information from Inje University, the recognition grade is recorded in the 3rd grade department as 21.5% while in the case of experiencing treatment from a physical therapist, the result was 39.1%. In the other department (the 1st grade department), what men and women heard from mass media was recorded at 17.5% and what they heard from other people, it was recorded at 33.8%(p<0.05). 3. The research about the recognition of academic ability of being a physical therapist was that 55.6% of teachers thought that 3-year-college was the best, which made the results different from the recognition grade of the experience of education(p<0.05). 4. In the recognition grade of physical therapeutics, there were significantly differences from 50.2% of men and 45.2% of women were expecting about 1mil ion won to 1.99million won. In case of 25.2% of people who have experience less than 15years at work, they expected about 2million to 2.99million won. The figures were higher than 10.1% of people who have experiences over 15years. About the recognition grade of physical therapists social level in the future is 48.8% of people who had experienced of physical therapy and 63.8% of people who never had experienced of it said it would be better in the future. From these results, the recognition about physical therapeutics and the view of its social status are optimistic and they know well about the level of academic ability of physical therapists. On the other hand, most teachers don't know exactly about physical therapists work. So we have to inform them aggressively for enhancing the recognition of physical therapy because high school students are well affected by their teachers when they face their future or major in university.

• Economic and Environmental Geology
• /
• v.25 no.4
• /
• pp.417-433
• /
• 1992

Lead-zinc-copper deposits of the Jeonheung and the Oksan mines around Euiseong area occur as hydrothermal quartz and calcite veins that crosscut Cretaceous sedimentary rocks of the Gyeongsang Basin. The mineralization occurred in three distinct stages (I, II, and III): (I) quartz-sulfides-sulfosalts-hematite mineralization stage; (II) barren quartz-fluorite stage; and (III) barren calcite stage. Stage I ore minerals comprise pyrite, chalcopyrite, sphalerite, galena and Pb-Ag-Bi-Sb sulfosalts. Mineralogies of the two mines are different, and arsenopyrite, pyrrhotite, tetrahedrite and iron-rich (up to 21 mole % FeS) sphalerite are restricted to the Oksan mine. A K-Ar radiometric dating for sericite indicates that the Pb-Zn-Cu deposits of the Euiseong area were formed during late Cretaceous age ($62.3{\pm}2.8Ma$), likely associated with a subvolcanic activity related to the volcanic complex in the nearby Geumseongsan Caldera and the ubiquitous felsite dykes. Stage I mineralization occurred at temperatures between > $380^{\circ}C$ and $240^{\circ}C$ from fluids with salinities between 6.3 and 0.7 equiv. wt. % NaCl. The chalcopyrite deposition occurred mostly at higher temperatures of > $300^{\circ}C$. Fluid inclusion data indicate that the Pb-Zn-Cu ore mineralization resulted from a complex history of boiling, cooling and dilution of ore fluids. The mineralization at Jeonheung resulted mainly from cooling and dilution by an influx of cooler meteoric waters, whereas the mineralization at Oksan was largely due to fluid boiling. Evidence of fluid boiling suggests that pressures decreased from about 210 bars to 80 bars. This corresponds to a depth of about 900 m in a hydrothermal system that changed from lithostatic (closed) toward hydrostatic (open) conditions. Sulfur isotope compositions of sulfide minerals (${\delta}^{34}S=2.9{\sim}9.6$ per mil) indicate that the ${\delta}^{34}S_{{\Sigma}S}$ value of ore fluids was ${\approx}8.6$ per mil. This ${\delta}^{34}S_{{\Sigma}S}$ value is likely consistent with an igneous sulfur mixed with sulfates (?) in surrounding sedimentary rocks. Measured and calculated hydrogen and oxygen isotope values of ore-forming fluids suggest meteoric water dominance, approaching unexchanged meteoric water values. Equilibrium thermodynamic interpretation indicates that the temperature versus $fs_2$ variation of stage I ore fluids differed between the two mines as follows: the $fs_2$ of ore fluids at Jeonheung changed with decreasing temperature constantly near the pyrite-hematite-magnetite sulfidation curve, whereas those at Oksan changed from the pyrite-pyrrhotite sulfidation state towards the pyrite-hematite-magnetite state. The shift in minerals precipitated during stage I also reflects a concomitant $fo_2$ increase, probably due to mixing of ore fluids with cooler, more oxidizing meteoric waters. Thermodynamic consideration of copper solubility suggests that the ore-forming fluids cooled through boiling at Oksan and mixing with less-evolved meteoric waters at Jeonheung, and that this cooling was the main cause of copper deposition through destabilization of copper chloride complexes.