• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.28-36
• /
• 2018

자가발전 도서는 내연발전 혹은 PV 발전을 이용하여 전력을 공급하고 있는데, 해양환경에 의한 문제점(경년열화, 염해), 환경오염(매연, 소음, 분진) 및 발전비용(설치비, 유지관리비) 상승 등 전력공급 효율성에 대한 문제점이 대두되고 있다. 한전에서 전력공급을 담당하고 있는 65개 자가발전 도서지역의 2016년 원가회수율은 27%에 불과하며 원가의 73%에 달하는 결손액이 발생되고 있다. 이들 도서지역에서 발생한 결손액의 현황을 보면, 발전분야에서 발생하는 비용은 전체의 91% 정도를 차지하고 있고 운영비용인 변동비(연료비)와 고정비(지급수수료, 수선유지비, 기타비용) 중에서 고정비가 차지하는 비율은 60% 정도이다. 즉, 도서지역 발전효율을 향상시키고 운영체계를 효율화시키는 최적 전력공급방안을 마련하여 운영 결손액을 줄일 필요가 있다. 그러므로 거리상 가까운 여러 개의 도서 발전설비를 한 곳으로 통합하고, 인근 도서지역 간 전력공급에 해저케이블을 이용하면 연료 수송 및 설비 유지관리의 간결화를 도모할 수 있다. 따라서, 본 논문에서는 통합운영 경제성 평가를 통하여, 내연발전 및 PV 발전으로 운영되고 있는 근거리 도서간 통합운영에 유효한 해저케이블 포설 방안(1회선, 2회선, 1회선 루프)을 결정하는 알고리즘을 제시한다. 또한, 제안한 알고리즘을 바탕으로 자가발전도서의 독립운전방식과 비교 분석한 결과, 근거리이며 내연발전으로 운영되나 최대부하가 작은 2개 혹은 3개 도서에 있어서 도서간 통합운영이 경제적인 전력공급방안임을 확인하였다.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.647-657
• /
• 2006

허용응력설계법과 극한한계 상태 설계법에 근거한 케이블과 보강형을 갖는 PSC 사장교의 예를 통해서 통계학적 확률분포를 고려한 확률론적인 위험성을 평가하였다. 사용성 한계상태 및 극한 한계상태에서의 케이블요소의 파괴확률과 거더의 최대 정모멘트. 부모멘트 발생단면, 그리고 최대전단력의 작용단면에서 각각의 요소 파괴 확률을 설계변수의 응답면에서 검토하였다. 응답면 기법(RSM)은 복잡한 다자유도 구조물에서 MCS를 사용하여 얻을 수 없는 상대적으로 매우 작은 파괴 확률값을 얻기 위해 사용이 가능할 뿐만 아니라, FOSM으로 쉽게 얻을 수 없는 한계상태방정식의 미분형태에도 성공적으로 적용이 가능 하다. 케이블과 보강형으로 구성된 병렬저항구조를 시스템 해석을 위해 각각 직렬구조로 연결하여 전체구조물의 체계신뢰성을 평가하고, 제안된 붕괴모드조합 예측값과 비교분석하였다. 제안된 붕괴모드의 조합에 의한 파괴확률검토는 조건부 파괴에 대한 동일한 발생확률을 구하며, 순열방법보다 개선된 시간비용과 효율성을 제공하며, 상하한계파괴확률을 구하는 체계 신뢰성해석에서 검토되지 않는 요소파괴의 조합에 의한 시스템의 위험성 검토를 제공한다.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.458-466
• /
• 2003

Several copolyimides have been synthesized with different combinations of comonomers in order to study the relationship between conductivity and water insolubility. m-Phenylenediamine (m-PDA), an angled comonomer, was introduced into the polymer backbone to increase water absorption, and resulted in higher proton conductivity. 2,2-bis(trifluoromethyl)benzidine (TFMB) was used as the comonomer to promote water insolubility. There is a good correlation between the water uptake and conductivity of the polyimides. The copolyimides that had high water uptake also generated high proton conductivity. Those polyimides had good mechanical properties. The copolyimides that have 27 mol% of TFMB and 9 mol% of m-PDA have reasonable conductivities and are insoluble in water at 90$^{\circ}C$, even though they have lower conductivities than those of the homopolymer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.283-283
• /
• 2010

Smart street light controller is a product with advance micro controller base for energy saving in conventional street lighting systems. Intelligent Street light controller are specially developed for automation and energy saving in conventional street light systems and lighting systems. It is so designed that it operates on sunrise & sun set timings according to longitude of particular location with facilitate to set month wise civil twilight timings to cope up with all seasons. Dimming (Power down) mode selection switch on/off at fixed times with relay or contactor. Night dimming, staggering and intelligent control reduces burn hours and increases the lifetime of lamps with about 30% and low annual operating cost type base are among the most inexpensive wireless technologies available. Low initial costs As PLC wireless, there is no need to establish cable connection.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.11-14
• /
• 2003

10GBASE-T is 10Gigabit Ethernet over horizontal structured, twisted-pair copper cabling.(1) It aims to transmit data at a speed of 10Gbps at a l00m distance away, through UTP (unshielded twisted -pair) Cat-5e cable 4-pair. This paper looks over the characteristic of media over Cat 5e, 6, 7, and then suggests how much noise should be removed from it in order to offer the transmission speed of 10Gbps as sending data through each physical medium.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.838-843
• /
• 2002

Recently, PDA and cellular phone with color LCD have been widely used in various fields by high efficiency and micro miniaturization technology. According to maturity of these mobile environments, user request about mobile application field is increased. Mobile applications provide various information which is concerned with user's position through cable and wireless transmission. This paper discusses the issues related to the mobile framework for integrated 4S data. The integrated 4S data mean spatial data fusion on GIS, SIIS, ITS, and GNSS. The mobile framework provides not only spatial data but also location services such as reverse geocoding, directory service, etc. It consists of client subsystem, service provider, and data provider.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1848-1853
• /
• 2016

Control Rod Position Indicator in nuclear reactor vessel has developed for small reactor in Korea. Because of severe environment in reactor vessel, target of this study is to develop the suitable position indicator. In this study, solenoid type position indicator made of Mineral Insulated Cable(MI Cable) was introduced to adapt in severe environment. And inductance of the solenoid was used to indicate the rod position for high precision. But problem of this concept is that a linear slope of inductance is changed by temperature effect. To resolve this problem, two sensing coils were introduced for temperature compensation. A role of the sensing coil is to make reference linear equation about certain temperature. To confirm this concept, also, inductance of solenoid and sensing coils were measured at room and high temperature (${\sim}300^{\circ}C$). The results of measurement show that the position error of sensing coil between room and high temperature was about 2%. But it was identified that this error was resulted from insufficient test environment (temperature error between solenoid and sensing coils was about 2% at high temperature condition). Therefore, solenoid type position indicator shows that it is very suitable in reactor vessel as a high precision rod position indicator.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1071-1081
• /
• 2022

As the demand for high-rise buildings increases, the demand for high-speed elevators is also increasing. In order to make a high-speed elevator, a method is needed to reduce the weight of the elevator's components, which is a constraint on the increase in speed. As a measure to reduce the weight, it is possible to remove the traveling cable for power and signal supply. Since the weight of the traveling cable varies depending on the position of the carriage, it is difficult to compensate the weight using the counter weight. The power supply is a structure in which a brush-rail type power input terminal is installed in the elevator hoistway to receive power in a contact-type manner while the carriage is moving. If a small-capacity ESS is installed in a passenger car, power can be supplied uninterruptedly inside the passenger car. A small-capacity ESS charging system to be applied to such an elevator system is required to perform several functions. First, the passenger Car must be able to charge as much as possible even during high-speed operation. A control algorithm with high responsiveness is required because charging starts and ends repeatedly by the partially installed input power stage. In addition, if the input-side line impedance is large due to the structure of the system and the response characteristic is increased, the stability of the system may be lowered. Accordingly, in this paper, we propose a control algorithm that has a stable steady-state output while having a fast response in a transient state. To verify the proposed control algorithm, simulation was conducted using PSIM, and the performance of the controller was verified by manufacturing a prototype buck conveter charger.

• 한국융합학회논문지
• /
• 제8권8호
• /
• pp.27-32
• /
• 2017

복수 개의 웨어러블 디바이스는 휴대성 때문에 유선으로 통신하는 것이 적합하지 않다. 복수 개의 웨어러블 디바이스가 서로 통신 할 때 우수한 통신 품질과 그룹 활동 특징 때문에 무선통신 방법을 이용한다. 본 논문에서 복수 개의 웨어러블 디바이스들의 그룹형 디스플레이를 위한 그룹결정 알고리즘을 제안하였다. 이것은 무선통신 환경에서 여러 개의 웨어러블 디바이스들이 단체동작 디스플레이를 할 때 거리측정을 통하여 그룹멤버로 인지하는 그룹결정 알고리즘을 의미한다. 실험결과 복수 개의 웨어러블 디바이스들의 그룹 디스플레이가 단일 웨어러블 디스플레이의 한계를 극복하였음을 보여주었다.

• 한국의상디자인학회지
• /
• 제18권3호
• /
• pp.129-144
• /
• 2016

The purpose of this study is to identify current trends in hip-hop fashion in korea and how they are influenced by musical characteristics of female hip-hop. This study considers the relationship between female hip-hop music and their fashion through the history of hip-hop. Data has been collected and analyzed from broadcastings, performances, music videos, and album jackets of female musicians who appeared in the cable television program 'Unpretty Rapstar' by MNET during two seasons in 2015. "Unpretty Rapstar" is the first program to focus on the music and fashion of female Korean hip-hop musicians. For the theoretical review, this article examines books and journal articles, which provide insight into the history and formation of hip-hop. It also analyzes the hip-hop styles of female musicians in Korea through Hiphopplaya.com, an Internet site specializing in hip-hop. the results of the analysis of the fashion of female Korean hip hop musicians is as follows: The characteristics of the styles of female hip-hop artists come out of Glam Style, which emphasizes femininity, but is also composed of a practical and dynamic street casual style. Most of the clothes are skinny jeans and sweat suits with vertical and slim-fit silhouettes or stadium jackets and jersey jackets with oversized silhouettes. The main colors of these outfits are prominently yellow and red with darker grayish tones, but also include natural achromatic colors.