• 전자공학회지
• /
• 제17권2호
• /
• pp.56-64
• /
• 1990

• 국제초고층학회논문집
• /
• 제3권1호
• /
• pp.1-8
• /
• 2014

When seismic isolation system is applied to high aspect-ratio (height/wide-ratio) steel structures, there are several problems to be taken into consideration. One is lifting up tensile force on the isolation bearing by overturning moment caused by earthquake. Another is securing building stiffness to produce seismic isolation effects. Under these conditions, this paper reports the structural design of high-rise research building in the campus of Tokyo Institute of Technology. With the stepping-up system for the corner bearings, the narrow sides of single span framework are designed to concentrate the dead load as counter-weight for the tensile reaction under earthquake. Also we adopted concrete in-filled steel column and Mega-Bracing system covering four layers on north & south framework to secure the horizontal stiffness of the building.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.1-10
• /
• 1996

Protocol specifications and service definitions for distributed open system applications are defined using ASN.1. Therefore, to implement an open system application likes MHS, it is necessary to have well defined encoding/decoding modules which translate ASN.1 protocol specifications into their transfer syntaxes. However, that work is usually tedius, time consuming, and error prone. In this paper, we designed and implemented a new ASN.1 tool set which includes a new ASN.1 run-time library, called HY BER/DER, and an enhanced ASN.1-to-C compiler, called HYASNC$^{+}$. HYASNC$^{+}$ automatically generates C language encoder/decoder stub files and heder files for basic ASN.1 types and subtypes defiend in X.208 recommandation, and all X400 MHS system macro definitions. And, we evaluated the performance of HYASNC$^{+}$ compiler and HY BER/DER run-tiem library, and tested the interoperability of ASN.1 run-time library.

• 대한금속재료학회지
• /
• 제49권4호
• /
• pp.304-312
• /
• 2011

In this study, MOSFET type micro hydrogen gas sensors with platinum catalytic metal gates were designed, fabricated, and their electrical characteristics were analyzed. The devised MOSFET Hydrogen Sensors, called MHS-1 and -2, were designed with a platinum gate for hydrogen gas adsorption, and an additional sensing part for higher gas sensitivity and with a micro heater for operation temperature control. In the electrical characterization of the fabricated Pt-gate MOSFET (MHS-1), the saturated drain current was 3.07 mA at 3.0 V of gate voltage, which value in calculation was most similar to measurement data. The amount of threshold voltage shift and saturated drain current increase to variation of hydrogen gas concentration were calculated and the hydrogen gas sensing properties were anticipated and analyzed.

• 동아시아식생활학회지
• /
• 제18권4호
• /
• pp.601-607
• /
• 2008

This study was examined the preferred temperature and salinity of soup in various demographic groups in order to establish the desirable serving renditions of soup for customers' satisfaction and health. Temperature and salinity were measured in August and November in order to determine the seasonal variation in preference using a digital salinity-temperature measuring device. Four demographic groups totaling 530 were from foodservice establishments in elementary schools(ES: male 68/female 59), middle-high schools(MHS: 62/69), universities(UNIV: 72/67) and companies(COM: 69/64) in Seoul. Various thin or thick soups which are typically served in foodservice establishments were served hot(below $90^{\circ}C$) and warm(below $40^{\circ}C$) in a 50mL portion: salty(1.2%) and less salty(0.4%) at $55{\pm}2^{\circ}C$. The preferred salinities and temperatures of the soups were found to be 0.74%, 0.82%, 0.64% and 0.67% and $49.65^{\circ}C$, $54.24^{\circ}C$, $57.56^{\circ}C$, $58.81^{\circ}C$ for the ES, MHS, UNIV and COM groups, respectively. The preferred temperatures of the soups were increased depending on the age, so the positive correlation was shown between temperature and age. However the preferred salinities of soups were not effected. There was no consistent tendency between men and women in temperature. For salinity, men preferred $0.04{\sim}0.12%$ higher than women in the ES, MHS and UNIV groups. There is no consistent tendency between thin and thick soup in temperature. All groups preferred higher salinity in the thick soup than in the thin soup. Most of the customers preferred a higher temperature and higher salinity in November than in August.

• 한국통신학회논문지
• /
• 제31권10B호
• /
• pp.891-899
• /
• 2006

일반적으로 무선 네트워크는 일정한 크기의 셀 단위로 구성된다. 통신 중인 단말은 이러한 셀 사이를 이동하게 되고, 셀과 셀 사이를 이동하는 것을 핸드오프라고 한다. 최근의 셀 크기는 보다 많은 사용자를 수용하기 위해 피코 셀 단위로까지 작아지고 있다. 이렇게 셀 단위가 작아지면, 더욱 빈번한 핸드오프가 일어나게 된다. 한편, 증가 추세에 있는 멀티미디어 서비스에 대한 만족도를 높이기 위해 QoS를 보장하는 것이 중요하다. 본 논문에서는 빈번한 핸드오프로 인한 연결 실패율을 줄이고자 지리적 정보를 토대로 이동성을 예측하고, 그 예측 결과를 사용하여 이동 단말의 속도에 따라 대역폭 예약을 다르게 하는 방식을 제안한다. 이 방식은 이동 단말의 속도와, 셀 내의 도로 사정, 도로 사정에 따른 다음 셀 이동 확률 등을 이용하여 대역의 예약범위와 예약 대역폭 량을 결정한다. 이러한 방법으로 좀 더 확실한 이동성 예측과 예약 대역폭 미사용에 따른 대역폭 낭비를 줄이는 효과가 나타날 것이다.

• 한국정보통신학회논문지
• /
• 제2권2호
• /
• pp.169-180
• /
• 1998

본 논문에서는 데스크탑 회의시스템 지원을 위해 메시지 처리 시스템에서 실시간 서비스 프리미티브를 개발한다. 데스크탑 회의시스템은 대표적인 실시간 그룹통신 서비스중의 하나이다. 현대 조직 사회에서는 조직의 작업 대부분이 서로간의 헙동체제로 처리됨에 따라 조직원간의 통신을 효율적으로 지원하기 위해 실시간 그룹통신에 대한 요구가 점차 증가되고 있다. 현재까지 다양한 형태의 실시간 그룹통신 시스템이 개발되었지만 널리 사용되는 시스템은 드문 실정이다. 이러한 실시간 그룹통신 시스템의 확산을 막는 걸림돌은 사용자가 보다 쉽게 접할 수 있는 보편적인 실시간 그룹정보 전송환경의 부재에 기인한다. 분산사무환경에서 정보교환 서비스로 가장 널리 사용되고 있는 메시지 처리 시스템은 표준화된 정보전송 체계를 제공하며 다른 응용 프로토콜과의 연동시 유용하게 이용될 수 있는 특징을 가지고 있다. 따라서 본 논문에서는 실시간 그룹통신지원을 위해 메시지 처리 시스템을 이용하는 방안을 제시하고자 한다. 즉, 메시지 처리 시스템에서 실시간 그룹정보를 효율적으로 관리하고 실시간 전송을 지원하는 서비스 프리미티브를 제안한다.

• 정보보호학회지
• /
• 제5권3호
• /
• pp.69-85
• /
• 1995

ITU-T X.435 EDI 시스템에서의 정보보호 서비스는 크게 MHS 정보보호 서비스와 Pedi 정보보호 서비스로 나눌 수 있다. 본 논문에서는 X.435 EDI 정보보호 서비스의 종류를 살펴보고, 이들의 데이타 구조의 분석뿐만 아니라 정보보호 서비스를 제공하기 위해 사용되는 각 필드들이 의미하는 바를 분석, 정리하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1186-1190
• /
• 1995

This paper is focused on the formulation of explicit closed-form functions describing the performance measures of the general flexible manufacturing system (FMS)according to the strategy of material handling system(MHS). the performance measures such as the production rate, the production lead-time and the utilization rate of the general FMS are expressed, respectively, as the explicit closed-form functions of the part processing time, the service rate of the material handling system (MHS) and the number of machine tools in the FMS. For this, the gensral FMS is presented as a generalized stochastic Petri net model, then, the moment generating function (MGF) based approach is applied to obtain the steady-state probabity formulation. Based on the steady-state formulation, the explicit closed-form functions for performance measures of the probability FMS can be obtained. Finally, the analytical results are compared with the Petri net simulation results to verify the validity of the suggested method. The paper is of significance in the sense that it provides a comprehensive formula for performance measures of the FMS even to the industry engineers and academic reademic resuarchers who have no background on Markov chain analysis method or Petrinet modeling

• Journal of Communications and Networks
• /
• 제7권2호
• /
• pp.126-134
• /
• 2005

Reducing energy consumption in mobile hosts (MHs) is one of the most critical issues in wireles/mobile networks. IP paging protocol at network layer and power saving mechanism (PSM) at link layer are two core technologies to reduce the energy consumption of MHs. First, we investigate the energy efficiency of the current IEEE 802.11 power saving mechanism (PSM) when IP paging protocol is deployed over IEEE 802.11 networks. The result reveal that the current IEEE 802.11 PSM with a fixed wakeup interval (i.e., the static PSM) exhibits a degraded performance when it is integrated with IP paging protocol. Therefore, we propose an adaptive power saving mechanism in IEEE 802.11-based wireless IP networks. Unlike the static PSM, the adaptive PSM adjusts the wake-up interval adaptively depending on the session activity at IP layer. Specifically, the MH estimates the idle periods for incoming sessions based on the exponentially weighted moving average (EWMA) scheme and sets its wake-up interval dynamically by considering the estimated idle period and paging delay bound. For performance evaluation, we have conducted comprehensive simulations and compared the total cost and energy consumption, which are incurred in IP paging protocol in conjunction with various power saving mechanisms: The static PSM, the adaptive PSM, and the optimum PSM. Simulation results show that the adaptive PSM provides a closer performance to the optimum PSM than the static PSM.