• Journal of Information Technology Applications and Management
• /
• 제26권6호
• /
• pp.47-63
• /
• 2019

The volatility of major crypto currencies was examined and they are diagnosed whether they have a systematic risk or not, by estimating market beta representing systematic risk using GARCH( Generalized Auto Regressive Conditional Heteroskedastieity) model. First, the empirical results showed that their prices are very volatile over time because of the existence of ARCH and GARCH effects. Second, in terms of efficiency, asymmetric GJR model was estimated to be the most appropriate model because the standard error of a market beta was less than that of the OLS model and GARCH model. Third, the estimated market beta of Bitcoin using GJR model was less than 1 at 0.8791, showing that there is no systematic risk. However, unlike OLS model, the market beta of Ethereum and Ripple was estimated at 1.0581 and 1.1222, showing that there is systematic risk. This result shows that bitcoin is less dangerous than Ripple and Ethereum, and ripple is the most dangerous of all three crypto currencies. Finally, the major cryptocurrency found that the negative impact caused greater variability than the positive impact, causing bad news to fluctuate more than good news, and therefore good news and bad news had a different effect on the variability.

• 동아시아식생활학회지
• /
• 제20권5호
• /
• pp.776-784
• /
• 2010

This study investigated causal relationships between goal orientation, sales and performance towards increasing the effectiveness of up-selling in internal promotion methods in family restaurants and provided implications about the hiring and training of sales people. The subjects were 232 sales people in family restaurants. The data were collected by self-administered questionnaires and analyzed by exploratory factor analysis, reliability analysis, comparative analysis of the average, and regression analysis. Results, showed that variations in goal orientation, sales, and performance depended on the age and experience of salespeople and that goal orientation makes adaptive selling more effective. It turned out that effort selling affects up-selling result than adaptive selling. Long-term workers were better than short-term workers in goal orientation, selling, and up-selling results, so human resource management needs to implement a long-term plan to enhance these effects. And, because effort selling is more effective than adaptive selling in up-selling results in family restaurants, effort selling requires training.

• Journal of Korean Dental Science
• /
• 제11권1호
• /
• pp.14-20
• /
• 2018

Purpose: The purpose of this study is to measure and compare the removal torques of different cements applied in attachments of zirconia restorations on titanium (Ti) abutments fitted with retrievable cement-type slot (RCS) on the lingual side for the better retrievablity by use of a slot driver. Materials and Methods: Three types of cements were used in the experiment: two permanent cements in $RelyX^{TM}$ U200 (RU) (3M ESPE) which is a resin cement and $FujiCem^{TM}$ (FC) (GC) which is a resin-modified glass ionomer cement, and a temporary cement in $Freegenol^{TM}$ temporary cement (TC) (GC). Measurements of removal torques were conducted as follows; an attached sample was fixed on the equipment customized for the experiment; a slot driver was connected to a MGT12 (Mark-10 Corp.), a torque measurement instrument; the sample had the driver fitted to its RCS and then was rotated until the it was removed; and finally, the maximum torque value was recorded. Result: As for the removal torque measurement results, the average values were $47.9{\pm}2.6Ncm$ for RU, $43.4{\pm}1.5Ncm$ for FC, and $20.9{\pm}1.0Ncm$ for TC. The statistical analysis using Kruskal-Wallis test yielded the significance probability of P<0.05 (P=0.002), which confirmed the presence of significant differences between the three groups. Conclusion: All three cements exhibit clinically acceptable levels of removal torque when applied to an upper zirconia implant restoration fitted with a lingual slot, with RU and FC, the two permanent cements, having the significantly higher values than that of TC, the temporary cement.

• 한국약용작물학회지
• /
• 제27권6호
• /
• pp.390-396
• /
• 2019

Background: Usually ginseng seeds are sown during autumn and spring. Sowing in spring often results in poorer seedling establishment than in autumn. One of the reasons for poor germination could be cold-treatment condition for breakage of physiological dormancy during winter. Here we tested the effects of storage temperature used during cold treatment on germination. Methods and Results: Germination properties were observed after dehiscent seeds were stored as wet and dry at 2℃, -2℃, -3.5℃ and alternating temperature (AT). Seed dryness and storage temperature affected germination properties (p < 0.01). Wet and AT condition germinated highest, and wet and -3.5℃ condition germinated lowest, which was 91.2% and 1.4% respectively. Mean germination time (MGT) of the wet and AT condition was faster than other treatments at 2.4 days, and the dry and -2℃ condition was the longest. Germination performance index (GPI) was highest for wet and AT condition (37.7%) and the lowest for wet and -3.5℃ condition (0.5%). The growth of above-ground and below-ground were the best for wet and 2℃ condition, and wet seeds showed better growth than dry seeds (p < 0.01). Conclusions: For cold treatment, ginseng seeds may not be stored below -2℃ for successful germination during spring sowing.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.246-261
• /
• 2002

The screw loosening is one of the complications that happen frequently in dental implant prostheses. The purpose of this study was to evaluate the changes of reverse/loosening (opening) torque of the screw according to the surface modifications by sandblasting and 24K gold electroplating as well as to determine the possibility of the clinical use of a washer in dental implant. The reverse torque of 4 experimental conditions(control, sandblasted, use of washers, electroplasted) was measured by digital torque gauge (Model MGT50Z, Mark-10 Corp., 458 West John Street Hicksville, NY 11801 USA). Electronic torque controller (Nobel Biocare DEA 020) was used in fastening the gold screws into abutment replicas. Mixed Linear Model Analysis method was used for statistical analysis. To examine the changes of screw thread surface, microphotographs were taken by Olympus PME-3 metallurgic microscope (Olympus Optical Co. Ltd., Tokyo, Japan). Within the limitations of this study, the following results were drawn: 1. The surface modifications of the gold screws and the use of a washer have significantly affected the reverse torque value compared to the control group (P<0.01). 2. Sandblasting and electroplating treatments demonstrated significantly higher reverse torque value than that of control group. 3. The use of a washer may be one of the useful clinical methods that prevent the screw loosening. However, further studies are necessary for the material selection and design of the washer.

• 신재생에너지
• /
• 제6권1호
• /
• pp.29-37
• /
• 2010

Biogas is a carbon neutral energy and consists of mostly methane and carbon dioxide, with smaller amounts of water vapor, and trace amounts of $H_2S$, Siloxane and other impurities. Hydrogen sulfide and Siloxane usually must be removed before the gas can be used for generation of electricity or heat. The goals of this project are to develope the Fuel conditioning system of Land Fill Gas for 30kW-Micro Gas Turbine co-generation system. The fuel conditioning system mainly consists of $H_2S$ removal system, Land Fill Gas compressor, Siloxane removal system and many filtering systems. The fuel requirement of 30kW MGT is at least 32% of $CH_4$, $H_2S$ (<30 ppm), Siloxane (<5ppb) and supply pressure (> 0.6 MPa) from LFG compressor. Main mechnical charateristics of Micro Gas Turbine system by using LFG have the specific performance; 1) high speed turbine speed (96,000 rpm) 2) very clean emmission NOx (<9 ppm) 3) high efficiency of energy conversion rate. This paper focuses on the development of design technology for LFG fuel conditioning system. The study also has the plan to replace the fuel of gas turbine and other distributed power systems. As the increase of Land Fill Gas (LFG), this system help to contribute to spread more New & Renewable Energy and the establishment of Renewable Portfolio Standards (RPS) for Korea.

• 한국물환경학회지
• /
• 제28권4호
• /
• pp.595-600
• /
• 2012

This study is to assess the application of SWAT-CUP(Soil and Water Assessment Tool-Calibration Uncertainty Programs) and to extend daily flow data from 8-day interval flow data which has been measured by Korean Ministry of Environment(MOE). Model sensitivity analysis and calibration were performed with sequential uncertainty fitting(SUIF-2), which is one of the programs interfaced with SWAT, in the package SWAT-CUP. The most sensitive parameters were SOL_K.sol, CH_N2.rte, CN2.mgt, SOL_BD.sol, ALPHA_BF.gw, ALPHA_BNK.rte, SOL_AWC.sol, CH_K2.rte, SFTMP.bsn, GW_DELAY.gw. Following the sensitivity analysis, SWAT-CUP calibration was carried out using 8-day interval flow data from January 2008 to December 2010. The results were then assessed based on the visual agreement and simulated flow plots and the performance statistics generated $R^2$ and NSE which are 0.71 and 0.61 respectively. Results of these statistics indicated that there was a good agreement between the observed and simulated flow. To extend daily flow data from 8-day interval flow data, parameters, which were estimated by SWAT-CUP, re-entered for SWAT model. As a result, the observed flow data were found to reflect the trend of simulated flow data. From these results, it is thought that this method could be used to provide daily flow data using 8-day interval flow data.

• 한국물환경학회지
• /
• 제26권5호
• /
• pp.754-760
• /
• 2010

This study was carried out not only to evaluate optimal operating condition to increase biogas production, but also to estimate feasibility of renewable energy from anaerobic digester of sewage sludge. Semi- continuous Fed and Mixed Reactors (SCFMRs) were operated in various condition to quantify the reactor variables. The result of SCFMR operation showed that the biogas productivity and total volatile solids (TVS) removal of total solids (TS) 4% reactor at hydraulic retention time (HRT) 20 days with Organic Loading Rate (OLR) of $1.45kg/m^3-d$ were $0.39m^3/m^3-d$ and 26.7%, respectively which was two times higher than that of TS 2.5% reactor. Consequently the daily biogas production of $20,000m^3$ would be possible from the total volume of $52,000m^3$ of anaerobic digesters of the municipal wastewater treatment plant in D city. In feasibility study for the Biogas utilization, combined heat and power system (CHP) and CNG gasification were examined. In case of CHP, the withdrawal period of capital cost for gas-engine (GE) and micro gas-turbine (MGT) were 7.7 years and 9.1 years respectively. biogas utilization as Clean Natural Gas (CNG) shows lower capital cost and higher profit than that of CHP system. CNG gasificaion after biogas purification is likely the best alternative for Biogas utilization which have more economic potential than CHP system. The withdrawal period of capital cost appeared to be 2.3 years.

• KIEE International Transactions on Power Engineering
• /
• 제3A권1호
• /
• pp.27-34
• /
• 2003

In this paper, the power conditioner composed of the stand-alone single-phase squirrel cage rotor type self-excited induction generator (SEIG) driven by prime movers such as a wind turbine and a micro gas turbine (MGT) is presented by using the steady-state circuit analysis based on the two nodal admittance approaches using the per-unit frequency in addition to a new state variable defined by the per-unit slip frequency along with its performance evaluations for the stand-alone energy utilizations. The stande-alone single-phase SEIG operating performances in unregulated voltage control loop are then evaluated on line under the conditions of the speed change transients of the prime mover and the stand-alone electrical passive load power variations with the simple theoretical analysis and the efficient computation processing procedures described in the part I of this paper. In addition, a feasuible PI controlled feedback closed-loop voltage regulation scheme of the stande-alone single-phase SEIG is designed on the basis of the static VAR compensate. (SVC) and discussed in experiment for the promising stand-alone power conditioner. The experimental operating performance results are illustrated and give good agreements with the simulation ones. The simulation and experimental results of the stand-alone single-phase SEIG with the simple SVC controller for its stabilized voltage regulation prove the practical effectiveness of the additional SVC control loop scheme including the PI controller with fast response characteristics and steady-sate performance improvements.

• 한국약용작물학회지
• /
• 제24권1호
• /
• pp.21-26
• /
• 2016

Background : Acer pictum is a deciduous tree belonging to the family Aceraceae. This study was conducted to collect basic data on mass propagation techniques by surveying the germination and growth characteristics of A. pictum seeds. Methods and Results : A. pictum seeds were harvested in 2014 on August 19, September 5, September 29 and October 31. The seeds were then sown on the same dates they were harvested. A portion of seeds harvested in August 2014 were stored at low temperatures and subsequently sown on March 11, 2015. The germination rate of A. pictum seeds was highest in seeds that were stored harvested on October 31. Mean germination time (MGT) was shortest and germination velocity (Rs) was fastest in seeds harvested on October 31. Root collar diameter, total root length, and dry weight were also highest from seeds collected October 31. Conclusions : A. pictum seeds harvested on October 31 had highest germination and growth rates compared with seeds harvested on earlier dates. It is expected that these results demonstrating optimum harvesting and sowing dates will be applicable to future seedling production for this tree species.