• Journal of Information Processing Systems
• /
• v.7 no.3
• /
• pp.531-542
• /
• 2011

In this paper, we propose a new congestion control scheme for high-speed networks. The basic idea of our proposed scheme is to adopt a game theory called, "Minority Game" (MG), to realize a selective reduction of the transmission speed of senders. More concretely, upon detecting any congestion, the scheme starts a game among all senders who are participating in the communication. The losers of the game reduce the transmission speed by a multiplicative factor. MG is a game that has recently attracted considerable attention, and it is known to have a remarkable property so that the number of winners converges to a half the number of players in spite of the selfish behavior of the players to increase its own profit. By using this property of MG, we can realize a fair reduction of the transmission speed, which is more efficient than the previous schemes in which all senders uniformly reduce their transmission speed. The effect of the proposed scheme is evaluated by simulation. The result of simulations indicates that the proposed scheme certainly realizes a selective reduction of the transmission speed. It is sufficiently fair compared to other simple randomized schemes and is sufficiently efficient compared to other conventional schemes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.46-46
• /
• 2010

In this paper, we studied the volume resistivity and the electrical conductivity properties of nano composites to investigate the electrical properties of epoxy composites added nano MgO. The specimens were produced by classifying to 1.0, 3.0, 5.0, 10[wt%] and virgin specimen according to the addition amount of MgO. We measured the volume resistivity of nano filler using the High Resistance Meter(4329A) at the measuring temperature changed to 25, 50, 80, 100, and [$120^{\circ}C$]. As the result, it is confirmed that the volume resistivity was the highest stability and volume resistivity value is $2.6{\times}10^{17}\;[\Omega{\cdot}cm]$ at 3.0[wt%]. And it is confirmed that the electrical conductivity property is sharply increased at low electric filed region and the conductivity current density is rapidly increased at high electric filed region.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.2
• /
• pp.103-111
• /
• 1996

In this paper, we studied on both electrochemical polarization behaviors and pitting characteristics of ultra high strength Al-Cu-Li-Mg-Ag-Zr alloys(named C1 and C2) and 2090 alloy according to their treatments in the deaerated 3.5% NaCl, using by the potentiodynamic and the potentiostatic method, SEM micrograph and surface roughness including depth of pitting attack. With the cyclic polarization curves, the hysteresis of the C1 and C2 alloys appeared more remarkably than that of the 2090 alloy, because of precipitation microstructural difference between C1, C2 alloys and 2090 alloy. In the pitting experiments, the correlations between pitting growth and aging conditions were analyzed with the SEM micrograph and measurement of the pit depth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1811-1813
• /
• 2016

DCF (Distributed Coordination Function) resolves the channel contention problem in a distributed manner by forcing nodes to randomly choose a waiting time in a contention window. However, since the size of a contention is limited, the collision probability increases with the number of sending nodes. To resolve the problem, in this paper, we propose a transmission control method based on the minority game (MG). Each node can determine autonomously whether to send or not without message exchanges with other nodes to maximize its profit. Through simulation studies, we verify that the proposed method can improves the performance of DCF in terms of collision probability in a congestion situation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.4
• /
• pp.322-328
• /
• 2006

A series of methanol extracts from leaf and root parts in spring- and winter-barley plants were assayed to determine their allelopathy and antioxidant activity. The methanol extracts applied on filter paper in a Petri-dish significantly inhibited root growth of Chinese milkvetch (Astragalus sinicus L.) seedlings. Leaf extracts at 25 and 50 g $L^{-1}$ inhibited root growth of Chinese milkvetch seedlings more than root extracts. No difference in phytotoxic effects of spring- and winter-barley seedlings extracts on root growth of Chinese milkvetch was observed. Methanol extracts dose-dependently increased DPPH free radical scavenging activity in vitro. DPPH free radical scavenging activity was higher in the methanol extracts from winter-barley seedlings than in those from spring-barley seedlings, and from leaf extracts than from root extracts. The antioxidant potential of the individual fraction from the methanol extracts of spring-barley seedlings was in order of n-butanol>ethyl acetate>water>chloroform>n-hexane fraction. By means of HPLC analysis, spring-barley (200.62 mg $100g^{-1}$) had more amount of total phenol acid than winter-barley (114.08 mg $100g^{-1}$). Especially, ferulic acid was detected in spring-barley extract (183.46 mg $100g^{-1}$) as the greatest amount. These results suggest that early seedlings of barley plants had potent allelopathy and antioxidant activity, and their activities were differently exhibited depending on plant parts and growing condition.

• Food Science and Biotechnology
• /
• v.18 no.2
• /
• pp.449-455
• /
• 2009

The antioxidant properties of water extracted polysaccharides (PW), 1%(w/v) NaOH extracted polysaccharides (PN1), and 5%(w/v) NaOH extracted polysaccharides (PN5) were assessed in this paper. PW showed good capability of scavenging $H_2O_2$, anti-lipid peroxidation, reduction power, and scavenging 1,1-diphenyl-2-picrylhydrazyl (DPPH). The maximum values were all observed at the dose of 1 mg/mL sample. As far as the antioxidant activities of PN1 were concerned, the capability of scavenging superoxide radical, chelating metal, and total antioxidation showed higher than those of PN5. When polysaccharide concentration was 1 mg/mL, the 3 index described above were attached 71.8%, 51.6%, and $446.3{\mu}M$ Trolox equivalent, respectively. With respect to PN5, higher capabilities of scavenging hydroxyl free radicals were obtained while the peak of 84.8% was observed at the concentration of 1.0 mg/mL. Moreover, the concentration-dependent influences were characterized in all cases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.131-134
• /
• 2001

In this paper, the piezoelectric and dielectric properties as a function of x and a in $aPbZr_xTi_{1-x}O_3-(1-a)Pb(Mn_{1/3}Nb_{2/3})O_3$ + ywt%MgO is investigated. As a results, when a is 0.95 and x is 0.505, electromechanical coupling factor$(k_p)$, permittivity${\varepsilon}_33^T/{\varepsilon}_0$, piezoelectric strain constant$(d_{33})$ and mechanical quality factor$(Q_m)$ are 58 %, 1520, 272 pC/N and 1550, respectively. From XRD analysis, when x is 0.505, it is MPB which present rhombohedral and tetragonal phase in same quantity. Also, From SEM observation, when sintering temperature is $1150^{\circ}C$, grain size is about $2\;{\mu}m$. As a results added MgO dopant in the ternary piezoelectric ceramic, when MgO content is 0.1 wt%, $k_p$ increases to 63[%].

• Transactions of Materials Processing
• /
• v.27 no.1
• /
• pp.12-17
• /
• 2018

This paper outlines the research findings on the microstructure and mechanical properties of AZ31 Mg alloy fabricated by differential speed rolling (DSR) with respect to processing variables such as temperature, roll speed ratio (RSR), and deformation route. The resultant microstructure of the sample, deformed by 2-pass DSRs at 473 K, comprised finer grains with more uniform distribution than those at 573 and 623 K. This was due to active recrystallization, which was expected to appear during DSR at temperatures higher than 573 K. When the sample was deformed via DSR with RSR of 1:4 for the upper and lower rolls at 453 K, the values of yield and ultimate tensile strength were observed to be higher than their counterpart with RSR of 1:1. The application of sample rotation around the longitudinal axis would give rise to an excellent combination of tension strength (~330 MPa) and ductility (~20 %) at ambient temperatures. This is discussed based on its uniform fine grained structure and the softening of basal texture.

• Korean Journal of Plant Resources
• /
• v.33 no.6
• /
• pp.586-596
• /
• 2020

Chionanthus retusus has been used for landscaping and gardening trees, foods and medicines. This study was carried out to analyze the effect of fertilization on the growth performance of container seedlings (1-year-old) in C. retusus. We used multifeed 19 (MF) as a fertilizer, and measured the height, root collar diameter (RCD), biomass, seedling quality index (SQI) chlorophyll contents and chlorophyll fluorescence of the seedlings. The findings of this paper showed that the height, RCD, H/D ratio, T/R ratio and the fresh and dry weight of seedlings increased after fertilization. The moisture content of the stem and root did not show any significant difference among fertilizations, except in the case of the leaf. Production distribution such as the dry weight ratio of leaves and the stem dry weight ratio of fertilized seedlings had a higher value than that of non-treatment. SQI was the highest in MF 1,000 mg/L and 2,000 mg/L treatment. Chlorophyll contents (SPAD value) also increased with the increase in fertilization concentrations. Chlorophyll fluorescence (F_v/F_m) showed the highest value of 0.8 in MF 2,000 mg/L treatment.

• Journal of the Korean Ceramic Society
• /
• v.44 no.11
• /
• pp.597-606
• /
• 2007

With the advent of ubiquitous age, the high quality dielectric materials have been required for the wireless communications available to the millimeterwave as well as microwave frequencies. The utilizable region for the frequency has been expanding to the millimeter-wave region because of the shortage of radio frequency (RF) resources. These high frequencies would be expected for ultra high speed LAN, ETS and car anti-collision system on the intelligent transport system (ITS) and so on. Silicates are good candidates for microwave/millimeterwave dielectrics, because of their low dielectric constant ${\epsilon}_r$ and high quality factor (High Q). Forsterite ($Mg_2SiO_4$) is one of the silicates with low ${\epsilon}_r$ of 6.8 and Q f of 240000 GHz. In this paper, we reviewed following three categories for synthesis of forsterite: (1) Synthesis of high Q forsterite (2) Adjust the temperature coefficient of resonant frequency $TC_f$ (3) Diffusion of $SiO_{4^-}$ and Mg-ions on the formation of forsterite.