• Journal of Korea Multimedia Society
• /
• v.1 no.2
• /
• pp.162-172
• /
• 1998

In this paper, we implement a gigabyte Hangul text retrieval engine HMG(Hangul MG) which is based on the English text retrieval engine MG(Managing Gigabytes) and the Hangul lexical analyzer HAM(Hangul Analysis Module). To support Hangul information, we use the KSC 5601 code in the database construction and query processing stages. The lexical analyzer, parser, and index construction module of the MG system are modified to support Hangul information. To show the usefulness of HMG system, we implemented a NOD(Novel On Demand) system supporting the retrieval of Hangul novels on the WWW. The proposed system HMG can be utilized in the construction of massive full-text information retrieval systems supporting Hangul.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.22-25
• /
• 2002

In this paper, we deposited MgO buffer layer on p-type (100)Si substrate in the condition of substrate temperature 400$^{\circ}C$, working gas ratio Ar:O$_2$=80:20, RF Power 50W, working pressure 10mtorr, and the thickness of the film was about 300${\AA}$. Then we deposited Ba$\sub$0.5/Sr$\sub$0.5/TiO$_3$ thin film using RF Magnetron sputtering method on the MgO/Si substrate in various RF power of 25W, 50W, 75W. The film deposited in 50W showed the best crystalline from the XRD measurement. To know the electrical properties of the film, we manufactured Al/BSTMgO(300${\AA}$)/Si/Al structure capacitor. In the result of I-V measurement, The leakage current density of the capacitor was lower than 10$\^$-7/A/$\textrm{cm}^2$ at the range of ${\pm}$150kV/cm. From C-V characteristics of the capacitor, can calculate the dielectric constant and it was 305. Finally we deposited BST thin film on bare Si substrate and (100)MgO substrate in the same deposition condition. From the comparate of the properties of these samples, we found the properties of BST thin film which deposited on MgO/Si substrate were better than on bare Si substrate and similar to on MgO substrate.

• Transactions of Materials Processing
• /
• v.17 no.1
• /
• pp.13-18
• /
• 2008

Mg and Mg alloys are promising materials for light weight high strength applications. In this paper, grain refinement of pure Mg using severe plastic deformation was tried to enhance the mechanical properties of the hard-to-deform metallic material. The microstructure and the mechanical properties of Mg processed by equal channel angular pressing(ECAP) at various processing temperatures were investigated experimentally. ECAP with channel angle of $90^{\circ}$ and corner angle of $0^{\circ}$ was successful at $300^{\circ}C$ without fracture of the samples during the processing. The hardness of the ECAP processed Mg decreased with increasing ECAP processing temperature. The effect of temperature on the hardness and microstructure of the ECAP processed Mg were explained by the dislocation glide in the basal plane and non-basal slip systems and by the dynamic recrystallization and recovery.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.3
• /
• pp.209-214
• /
• 1999

This paper deals with the effects of activation process of MgO thin film on the dielectric characteristics of surface discharge type AC PDP. The discharge voltage decreased with increase in the MgO activation time and temperature until $400^{\circ}C$ under the condition of clean high vacuum. However, for the sample activated above $430^{\circ}C$ the discharge voltage increased. These results may be explained by the MgO morphology change and surface cleaning in the process of activation.

• Journal of the Korean Society of Food Culture
• /
• v.19 no.2
• /
• pp.177-183
• /
• 2004

Green tea, a leaf of the plant Camellia sinensis, is one of the most consumed traditional oriental beverages. Green tea has been considered a medicine and a healthful beverage since ancient times, but recently it has received a great deal of attention because of its antioxidants like polyphenols. Moreover, green tea contains amino acids, carbohydrates, proteins, chlorophyll, volatile compounds, minerals, and phytochemical components that are essential or helpful to human health. Depending on the manufacturing process, green teas are classified into several types. Among these, powdered green tea can be effective in the absorption of ingredients compare with other types of green tea since we take the beverage with powder itself. In this paper, the contents of general ingredients (moisture, proteins, fat, carbohydrates, and ash), minerals (Fe, Mg, Ca, Na, K, and P), hunter color values, and alcohol insoluble substance were determined in total of six powdered green teas commercialized in Korea and Japan.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.703-706
• /
• 2004

This paper deals with the various sealing conditions in a vacuum and the discharge characteristics. The MgO thin film is prepared by e-beam evaporation method. Sealing process was performed in a vacuum at panel temperature of 430 $^{\circ}C$. We find the cracks on the MgO film surface, which results in higher discharge voltage and lower luminous efficiency. The vacuum in-line sealing technology does not require additional annealing process but induces the MgO cracks because of the high temperature sealing cycle in a vacuum. Therefore we modify the vacuum in-line sealing cycle which the MgO cracks are not found and the good characteristics of plasma displays are found in higher sealing pressure at sealing temperature of 430 $^{\circ}C$.

• Journal of Environmental Science International
• /
• v.15 no.12
• /
• pp.1199-1203
• /
• 2006

This paper analyzes the separation efficiency of vehicles mat residual product, and caloric value, element analysis and heavy metal of separated PE & PVC mat residual product. A results of separation efficiency, fiber fraction of PE & PVC mat residual product was analyzed 71.9% and 18.6%, respectively. Caloric value of PE & PVC mat residual product was analyzed 3,894kca1/kg and 10,203kca1/kg, respectively. A results of element analysis, main component of PVC mat were carbon(33.2%) and oxygen(21.0%), and main component of PE mat fiber were carbon(75.4), hydrogen(11.3%) and oxygen(9.1%). Lead and cadmium concentration of PVC powder was detected 98.9mg/kg and 19.8mg/kg, but Lead and cadmium concentration of fiber was detected 15.7mg/kg and 6.1mg/kg.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1497-1500
• /
• 2005

This paper accomplished the basic research using the hydrostatic extrusion to make the nano-grained bulk material. It was carried out a hot hydrostatic extrusion using the hipped bulk Al-7.5%Mg that was taken from University of California, Davis. in order to investigate the effect of the hot isostatic extrusion. The tensile tests for the hipped bulk Al-7.5%Mg and the extruded one was executed and the results was compared.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1082-1086
• /
• 2004

Since the sheet forming of Mg alloy has many difficulties due to the low formability, many forming conditions need to be selected properly. Especially, the process variables should be investigated to increase the formability, such as, forming temperature. In this paper, the effects of forming process variables has been investigated using the bending and deep drawing process. A simple U-bending designed for mobile part could be formed in room temperature and springback amounts are surveyed. On the other hand, square cup part couldn't be formed in room temperature due to the low formability. Therefore, the effects of forming temperature are investigated in deep drawing process for square cup part. As a experimental and FEM results, the optimum forming temperature is presence and formability in a higher temperature is less than that of lower temperature. Above experimental results are compared with the FEM analysis and well coincided with the experimental results. Therefore, more detail investigations could be progressed to select more appropriate process conditions by the FEA.

• Korean Journal of Microbiology
• /
• v.12 no.1
• /
• pp.31-36
• /
• 1974

Four strains of yeasts were chosen from those isolated previously, and a strain from 160 isolates collected in this year were examined for the treatment of pulp waste liquor. Experiments about optimum nutrient condition, composition of cells, and reduction of B.O.D. on the "S" pulp industry waste liquor were performed with 5 strains. 1. The isolates(strain 112) was identified as Candida utilis. 2. The optium concentration of 4 components of nutrients were ($NH_4$)$SO_2$lg/l, yeast extract 70mg/l, $KH_2PO_4$ 300mg/l, and $MgSO_4{\ddot}7H_2O$ 500mg/l. 3. Specific growth ratio of Candida utilis KYRI 112 was 0.48/hr at optimum nutrient media and the yield was 0.45%(V/V). 4. Endomycopsis capsularis KYRI 613 contained more crude protein than the most of commercial yeasts. 5. The B.O.D. of waste liquor was reduced ro 20% of its value by the culture.e culture.