• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2000년도 추계학술발표강연 및 논문개요집
• /
• pp.39-39
• /
• 2000

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.305-309
• /
• 2002

We have successfully fabricated a Metal-Ferroelectric-Insulator-Semiconductor (MFIS) structure using Bi$\sub$4-x/La$\sub$x/Ti$_3$O$\sub$12/ (BLT) ferroelectric thin film and SiO$_2$/Nitride/SiO$_2$ (ONO) stacked buffer layers for single transistor type ferroelectric nonvolatile memory applications. BLT films were deposited on 15 nm-thick ONO buffer layer by sol-gel spin-coating. The dielectric constant and the leakage current density of prepared ONO film were measured to be 5.6 and 1.0 x 10$\^$-8/ A/$\textrm{cm}^2$ at 2MV/cm, respectively, It was interesting to note that the crystallographic orientations of BLT thin films were strongly effected by pre-bake temperatures. X-ray diffraction patterns showed that (117) crystallites were mainly detected in the BLT film if pre-baked below 400$^{\circ}C$. Whereas, for the films pre-baked above 500$^{\circ}C$, the crystallites with preferred c-axis orientation were mainly detected. From the C-V measurement of the MFIS capacitor with c-axis oriented BLT films, the memory window of 0.6 V was obtained at a voltage sweep of ${\pm}$8 V, which evidently reflects the ferroelectric memory effect of a BLT/ONO/Si structure.

• 한국세라믹학회지
• /
• 제39권4호
• /
• pp.377-385
• /
• 2002

Metal-Ferroelectric-Insulator-Semiconductor(MFIS) 구조의 적용하기 위해 R. F. 마그네트론 스퍼터를 이용하여 p-type Si(111) 기판 위에 $ZrO_2$와 $SrBi_2Ta_2O_9$ 박막을 증착하였다. SBT 박막은 $ZrO_2$ 완충층을 삽입함으로써 MFIS 구조의 전기적인 특성이 향상되었다. $ZrO_2$ 박막의 두께를 고정하고 SBT 박막의 두께를 160nm에서 220nm으로 변화시키면서 윈도우 메모리를 3-9V의 범위에서 측정하였다. Pt/SBT(160nm)/$ZrO_2$(20nm)/Si의 조건에서 최대 2.2V 메모리 윈도우 값을 얻을 수 있었으며 이 메모리 윈도우 값은 실제 적용되는 저전압 NDRO-FRAM 구동에 충분한 값이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.112-112
• /
• 2009

Temperature dependence of the ferroelectric properties of poly(vinylidefluoride-trifluoroethylene) copolymer thin films are studied with various insulators such as $SrTa_2O_6$ and $La_2O_3$. Thin films of poly(vinylidene fluoridetrifluoroethylene) 75/25 copolymer were prepared by chemical solution deposition on p-Si substrate. Capacitance-voltage (C-V) and current density (J-V) behavior of the Au/P(VDF-TrFE)/Insulator/p-Si structures were studied at ($150-200\;^{\circ}C$) and dielectric constant of the each insulators were measured to be about 15 at $850\;^{\circ}C$ for 10 minutes. Memory window width at 5 V bias the MFIS(metal-ferroelectric-insulator-semiconductor) structure with as deposited films was about 0.5 V at high temperature ($200\;^{\circ}C$). And the memory window width increased as voltage increased from 1 V to 5 V.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권1호
• /
• pp.51-65
• /
• 2008

The article presents the recent research development in polymer ferroelectric non-volatile memory. A brief overview is given of the history of ferroelectric memory and device architectures based on inorganic ferroelectric materials. Particular emphasis is made on device elements such as metal/ferroelectric/metal type capacitor, metal-ferroelectric-insulator-semiconductor (MFIS) and ferroelectric field effect transistor (FeFET) with ferroelectric poly(vinylidene fluoride) (PVDF) and its copolymers with trifluoroethylene (TrFE). In addition, various material and process issues for realization of polymer ferroelectric non-volatile memory are discussed, including the control of crystal polymorphs, film thickness, crystallization and crystal orientation and the unconventional patterning techniques.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.174-174
• /
• 2008

Non-volatile memories using ferroelectric-gate field-effect transistors (Fe-FETs) with a metal/ferroelectric/semiconductor gate stack (MFS-FETs) make non-destructive read operation possible. In addition, they also have features such as high switching speed, non-volatility, radiation tolerance, and high density. However, the interface reaction between ferroelectric materials and Si substrates, i.e. generation of mobile ions and short retention, make it difficult to obtain a good ferroelectric/Si interface in an MFS-FET's gate. To overcome these difficulties, Fe-FETs with a metal/ferroelectric/insulator/semiconductor gate stack (MFIS-FETs) have been proposed, where insulator as a buffer layer is inserted between ferroelectric materials and Si substrates. We prepared $SrBi_2Ta_2O_9$ (SBT) film as a ferroelectric layer and $LaZrO_x$ (LZO) film as a buffer layer on p-type (100) silicon wafer for making the MFIS-FET devices. For definition of source and drain region, phosphosilicate glass (PSG) thin film was used as a doping source of phosphorus (P). Ultimately, the n-channel ferroelectric-gate FET using the SBT/LZO/Si Structure is fabricated. To examine the ferroelectric effect of the fabricated Fe-FETs, drain current ($I_d$) versus gate voltage ($V_g$) characteristics in logarithmic scale was measured. Also, drain current ($I_d$) versus drain voltage ($V_d$) characteristics of the fabricated SBT/LZO/Si MFIS-FETs was measured according to the gate voltage variation.

• 한국세라믹학회지
• /
• 제37권11호
• /
• pp.1051-1057
• /
• 2000

TiO$_2$와 CeO$_2$박막을 Si 위에 증착한 후 MOCVD법에 의해 PbTiO$_3$박막을 증착하여 MFIS 구조를 형성하였다. 절연층의 후열처리가 절연층 및 MFIS 구조의 전기적 특성에 미치는 영향을 관찰하기 위해 산소분위기와 $600^{\circ}C$~90$0^{\circ}C$의 온도범위에서 후 열처리를 행하였고, C-V 특성 및 누설전류 특성을 분석하였다. CeO$_2$와 TiO$_2$박막의 유전상수는 증착 직후 6.9와 15였으며, 90$0^{\circ}C$ 열처리를 행한 후 약 4.9와 8.8로 감소하였다. 누설전류밀도 역시 증착 직후 각각 7$\times$$10^{-5}$ A/$ extrm{cm}^2$와 2.5$\times$$10^{-5}$ A/$\textrm{cm}^2$에서 90$0^{\circ}C$ 열처리를 거친 후에 약 4$\times$$10^{-8}$ A/$\textrm{cm}^2$와 4$\times$$10^{-9}$ A/$\textrm{cm}^2$로 감소하였다. Ellipsometry 시뮬레이션을 통해 계산된 계면층의 두께는 90$0^{\circ}C$에서 약 115$\AA$(CeO$_2$) 및 140$\AA$(TiO$_2$)까지 증가하였다. 계면층은 MFIS 구조에서 강유전층에 인가되는 전계를 감소시켜 항전계를 증가시켰고, charge injection을 방지하여 Al/PbTiO$_3$/CeO$_2$(90$0^{\circ}C$, $O_2$)/Si 구조의 경우 $\pm$2 V~$\pm$10 V의 측정범위에서 memory window가 계속 증가하는 것을 보여주었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.140-140
• /
• 2009

The Metal-ferroelectric-semiconductor (MFS) structure has superior advantages such as high density integration and non-destructive read-out operation. However, to obtain the desired electrical characteristics of an MFS structure is difficult because of interfacial reactions between ferroelectric thin film and Si substrate. As an alternative solution, the MFS structure with buffer insulating layer, i.e. metal-ferroelectric-insulator-semiconductor (MFIS), has been proposed to improve the interfacial properties. Insulators investigated as a buffer insulator in a MFIS structure, include $Ta_2O_5$, $HfO_2$, and $ZrO_2$ which are mainly high-k dielectrics. In this study, we prepared the Dy-doped $La_2O_3$ solution buffer layer as an insulator. To form a Dy-doped $La_2O_3$ buffer layer, the solution was spin-coated on p-type Si(100) wafer. The coated Dy-doped $La_2O_3$ films were annealed at various temperatures by rapid thermal annealing (RTA). To evaluate electrical properties, Au electrodes were thermally evaporated onto the surface of the samples. Finally, we observed the surface morphology and crystallization quality of the Dy-doped $La_2O_3$ on Si using atomic force microscopy (AFM) and x-ray diffractometer (XRD), respectively. To evaluate electrical properties, the capacitance-voltage (C-V) and current density-voltage (J-V) characteristics of Au/Dy-doped La2O3/Si structure were measured.

• 대한전자공학회논문지SD
• /
• 제38권11호
• /
• pp.765-770
• /
• 2001

고온 급속 열처리시킨 LiNbO₃/AIN/Si(100) 구조를 이용하여 MFIS 소자를 제작하고, 비휘발성 메모리 동작 가능성을 확인하였다. 고유전율 AIN 박막 위에 Pt 전극을 증착시켜 제작한 MIS 구조에서 측정한 1MHz C-V 특성곡선에서는 히스테리시스가 전혀 없고 양호한 계면특성을 보였으며, 축적 영역으로부터 산출한 비유전율 값은 약 8 이었다. Pt/LiNbO₃/AIN/Si(100) 구조에서 측정한 1MHz C-V 특성의 축적영역에서 산출한 LiNbO₃ 박막의 비유전율 값은 약 23 이었으며, ±5 V의 바이어스 범위 내에서의 메모리 윈도우는 약 1.2 V이었다. 이 MFIS 구조에서의 게이트 누설전류밀도는 ±500 kV/cm의 전계 범위 내에서 10/sup -9/ A/㎠ 범위를 유지하였다. 500 kHz의 바이폴러 펄스를 인가하면서 측정한 피로특성은 10/sup 11/ cycle 까지 초기값을 거의 유지하는 우수한 특성을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.171-172
• /
• 2007

We fabricated the metal-ferroelectric-insulator-semiconductor filed-effect transistors (MFIS-FETs) using the $(Bi,La)_4Ti_3O_{12}\;and\;LaZrO_x$ thin films. The $LaZrO_x$ thin film had a equivalent oxide thickness (EOT) value of 8.7 nm. From the capacitance-voltage (C-V) measurements for an Au/$(Bi,La)_4Ti_3O_{12}/LaZrO_x$/Si MFIS capacitor, a hysteric shift with a clockwise direction was observed and the memory window width was about 1.4 V for the bias voltage sweeping of ${\pm}9V$. From drain current-gate voltage $(I_D-V_G)$ characteristics of the fabricated Fe-FETs, the obtained threshold voltage shift (memory window) was about 1 V due to ferroelectric nature of BLT film. The drain current-drain voltage $(I_D-V_D)$ characteristics of the fabricated Fe-FETs showed typical n-channel FETs current-voltage characteristics.