• Journal of the Korea Society of Computer and Information
• /
• v.15 no.4
• /
• pp.99-106
• /
• 2010

In this paper, we propose an industrial fluid monitoring system which performs the flow control function and monitors fluid pressure transmitted from MFC(Mass Flow Controller) unit. This system consists of MFC unit, channel device, and monitoring management software. MFC unit transmits the measured data of the fluid pressure to the channel device which would provide the input/output interface between management software, monitoring and MFC unit. The monitoring and management software control and analyze by monitoring real time measurements of fluid pressure from each channel of MFC unit. This software can process 20 channels and 0.1 monitoring cycle which gives 200 data measurement per second (i.e., 720,000 data/hour). At this time, the storage space increases in proportion to the rise of input data. This growth of data and storage space makes loss of data access efficiency. Therefore, it demands the implementation by sensing scheme of change scope and data, which can effectively manage the data.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1697-1706
• /
• 2013

Protocol analyzer is being used to analyze proper processing of CMD & data when developing SD slave IP. In this thesis, a protocol analyzer was developed for analyzing SD protocol in Windows environment using Visual C++. SD protocol analyzer consists of embedded Linux software for storing SD memory data and MFC program for analyzing this. As for protocol analysis, it has been designed to collect data transmitted from SD memory card to host by Linux software for its analysis by MFC. It was found through the experiment that the CMD type could be confirmed that occurs when reading and writing data to SD memory card using the developed board, and debugging the problems that occur was possible.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.95-95
• /
• 2000

In this study, the LLI software in the Profibus is developed by using MFC and API of visual C++. This paper presents the implementation method of LLI protocol. Software of LLI protocol was implemented as Window-based program and DOS-based program for PC and sensor module, respectively.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.515-520
• /
• 2009

This paper presents the software design of RFID Educational system based on using 900MHz air interface between the reader and the tag. Software of the reader and active tag is developed on embedded environment and the software of PC controlling the reader is on window OS. ATmega128 processor is used for H/W of the reader and active tag, and C language is used for their developing. Programming on window OS used MFC. Main functions of this system are to control tag containing EPC global Data by PC through the reader, to obtain information of tag through the internet and to read/write data on tag memory. Software design of 900MHz RFID educational system is done on the basis of these functions.

• Tunnel and Underground Space
• /
• v.23 no.4
• /
• pp.261-270
• /
• 2013

As part of the development of the 3-D geologic modeling software, this study addresses on new development of software modules that can perform the analysis and visualization of the fracture network system in 3-D. The developed software modules, such as BOUNDARY, DISK3D, FNTWK3D, CSECT and BDM, are coded on Microsoft Visual Studio platform using the MFC and OpenGL library supported by C++ program language. Each module plays a role in construction of analysis domain, visualization of fracture geometry in 3-D, calculation of equivalent pipes, production of cross-section map and management of borehole data, respectively. The developed software modules for analysis and visualization of the 3-D fracture network system can be used to tackle the geomechanical problems related to strength, deformability and hydraulic behaviors of the fractured rock masses. All these benefits will further enhance the economic competitiveness of the domestic software industry.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.274-277
• /
• 2012

In this paper, we proposes the design of laundry system for low power and smart management. The low power system configures the network with the RF communication module that turn on/off periodically, power consumption less than operating the module all the time without it toggles. The smart management is RFID Laundry Management System (LMS), in order to provide high services, low operation costs and better monitoring. The proposed system consists of RFID tag, wireless RFID hanger and MFC software. To compare with other existing RFID system, our system was developed as a web application. Therefore, customer can check their cloth status through web page or smartphone devices. RFID reader was designed on hanger to make our system enables reliable running effectively. Some results on the performance of an implementation are presented.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.4
• /
• pp.1-6
• /
• 1984

An algorithm for the implementation of R2 MFC digital receiver is evaluated using simulated data. The algorithms satisfy the CCITT recommendations. In this paper, our aim is to provide more efficient way of decoding an input in PCM format and detecting the frequency components. The digital signal processor chip (S2811) is suggested to meet these aims Through the software simulation using an Altair 8800b microcomputer, the proposed receiver is shown to have tolerable performance in spite of a given noise, frequency drift, and twist.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.1
• /
• pp.61-69
• /
• 2002

This paper describes a converting algorithm between programmable languages of a software PLU. It is based on IEC 61131-3 standard and PC. The proposed control logic is designed by the software model and common element with data type, variables, POUs(program organization unit) and execution control unit commonly used within programmable languages of IEC 61131-3 Standard. The generation method of object file is proposed on five programmable language based on IEC 61131-3. It is represented as fo11ows; 1) the generation method using conversion algorithm from LD to IL with FBD(function block diagram), 2) the generation method using f code generation algorithm from SFC using the SFC execution sequence with FBD and ST(structured text). The proposed control logic generator was implemented by Visual C++ 6.0 and MFC on MS-windows NT 4.0.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.121-125
• /
• 2004

The preprocessor - solver - postprocessor software for 2D/Axisymmetric CSCM Upwind Flux Difference Splitting Navier-Stokes code has been developed for undergraduate educational purpose. This computational fluid dynamics (CFD) software allows students to setup, solve, visualize and control dynamically server for their own fluid problems via Internet. The preprocessor Is capable of generating geometry and grid, initial solution data and required solver control parameters. The postprocessor shows vector plot and contour plot with different options while residual plot shows root-mean-square (RMS) error history graphically and retrieves the data from solver interactively. Special feature of the preprocessor is grid generation part which is based on MFC/Visual C++ application and FORTRAN single block grid generator process. Many users can access solver via Internet from client computers and solve desired problems using locally installed pre- and postprocessor and remote powerful solver part.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.672-676
• /
• 2009

Recently, intelligent surveillance camera systems are needed popularly. However, current researches are focussed on improvement of a single module rather than implementation of an integrated system. In this paper, we implemented a wireless surveillance camera system which is composed of face detection, and using motion sensor. In our implementation, we used a camera module from SHARP, a pair of wireless video transmission module from ECOM, a pair of ZigBee RF wireless transmission module from ROBOBLOCK, and a motion sensor module (AMN14111) from PANASONIC. We used OpenCV library for face dection and MFC for implement software. We identified real-time operations of face detection, PTT control, and motion sensor detecton. Thus, the implemented system will be useful for the applications of remote control, human detection, and using motion sensor.