• Restorative Dentistry and Endodontics
• /
• 제13권2호
• /
• pp.337-348
• /
• 1988

The purpose of this study was to examine the fracture strength and characteristics of teeth with MOD cavity preparation. Freshly extracted sound maxillary premolars were cleaned and stored in normal saline solution $37^{\circ}C$ for 72 hours before experiments. The roots of teeth were embedded in a self-curing resin, and the exposed crown were maintained in a vertical position by a modelling wax in a brass ring. The MOD cavities were prepared with No. 57 carbide bur under high speed to a depth of 2.0mm and a width of 2.0mm(Fig.1). All the prepared teeth specimens were divided into 7 groups according to the mode of cavity form and restorative materials (Table 1, 2): Group I, unpreapred, intact teeth as control Group II, prepared cavity without restoration Group III, prepared teeth restored with amalgam Group IV, prepared teeth restored with composite resin (P-10) Group V, prepared teeth with beveled enamel margins restored with composite resin (P-10) Group VI, prepared teeth restored with light-cured composite resin (P-30) Group VII, prepard teeth with beveled enamel margins restored with light-cured composite resin (P-30) After placement of restorations, all of the specimens were stored in water at $37^{\circ}C$ for 72 hours before testing. All of the specimens were tested on the Instron Universal Testing machine (No. 6025) in order to evaluate the strength of fracture. One metal ball 5.0mm in diameter contacting the specimens parallel to the occlusal surface was used to in this study (Fig. 1). The fracture characteristics of the specimens were examined with naked eye and in the scanning electron microscope (JSM-20). The results obtained from this study were as follows: 1. The mean fracture strength was the highest in group VI and that in group II was the lowest. 2. The progress of crack of teeth propagated into the pulp cavity. 3. In case of the group of the restored teeth, the crack occurred to be accompanied with cuspal fracture. 4. The crack of restored teeth was initiated along the pulpo-axial line angle of the cavity.

• 한국주조공학회지
• /
• 제11권6호
• /
• pp.475-481
• /
• 1991

In this study the fabrication technology and mechanical properties of AC8A/$Al_2O_3$ Composites by squeeze casting process were investigated to develope for application as the piston materials that require good friction, wear resistance, and thermal stability. AC8A/$Al_2O_3$ composistes without a porosity and the break of preform were fabricated at the melt temperature of $740^{\circ}C$, the preform temperature of $500^{\circ}C$, and mold temperature of $400^{\circ}C$ under the applied pressure of $1200kg/cm^2$ as the results of the observation of microstructures. As the results of this study, the tensile strength of AC8A/$Al_2O_3$ composites was not increased linearly with $Al_2O_3$ volume fraction and so it seemed not to agree with the rule of mixture, which had been used often in metal matrix composite. Also the tensile strength after thermal fatigue test was little different from that before the test. Consequently it was thought that AC8A/$Al_2O_3$ composites fabricated under our experimental conditions had a good thermal stability and subsequently a good interface bonding. Wear rate(i.e., volume loss per unit sliding distance) of AC8A/$Al_2O_3$ composites was decreased with $Al_2O_3$ volume fraction and the sliding speed at both room temperature and $250^{\circ}C$ and so there was a good correlation between wear rate and hardness. Also the wear rate of AC/8A20% $Al_2O_3$ composities was obtained the value of $1.65cm^3/cm$ at sliding speed of 1.14m/sec as compared with about $3.0\;{\times}10^{-8}cm^3/cm$ hyereutectie Al-Si alloy(Al-16%Si-2%Cu-1%Fe-1%Ni), which applied presently for piston materials. The wear behavior of $Al_2O_3$ composites was observed to a type of abrasive wear by the SEM view of wear surface.

• 마이크로전자및패키징학회지
• /
• 제9권3호
• /
• pp.49-56
• /
• 2002

본 연구에서는 평탄형 (exact) GaAs 기판과 $2^{\circ}$, $6^{\circ}$, $10^{\circ}$ 경사형 (offcut) GaAs 기판 등 네 종류의 기판에 유기금속 기상성장장치를 이용하여 InGaP 에피막을 성장시켰고, 기판경사도에 따른 계면의 탄성특성이 InGaP 에피막의 전위밀도에 미치는 영향에 대하여 최초로 연구하였다. 탄성변형은 TXRD의 격자부정합과 격자 misfit등을 고려하여 산출되었고, 전위밀도는 에피막의 x-선 반치폭을 이용하여 계산되었다. 기판경사도가 $6^{\circ}$일 때 계면의 탄성특성이 가장 양호하였고, x-선 반치폭은 가장 낮았다. 11 K PL측정 결과, 기판경사도 증가에 따라 PL 발진파장은 감소하였고, 기판경사도가 $6^{\circ}$에서 PL 강도 역시 가장 높았다. 에피막의 TEM 관측 결과, 회절패턴은 전형적인 zincblende 구조를 보였고, 기판경사도 $6^{\circ}$에서 전위밀도가 가장 낮게 관측되어 TXRD 및 저온 PL측정 결과와 부합되었다. 본 연구의 결과와 소자제작 특성 및 빔특성을 종합적으로 고려해 볼 대, 광전소자용 InGaP/GaAs 이종접합구조에서 최적의 기판경사도는 $6^{\circ}$임을 밝혔다.

• 혜화의학회지
• /
• 제13권2호
• /
• pp.205-212
• /
• 2004

Now many sustitution and false articles is used in korea instead of heshouwu. To use heshouwu correctly, we will make a quilitative certificational plan of heshouwu to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source of plant Heshouwu is a root tuber of a perennial herb Polygonum multiflorum Thunberg(Family : Polygonaceae). 2) Harvest After planting 3-5 yaers, harvesting in an autumn, washin clean the mud, a big heshouwu cut off a half or section, dry in sunny place or at a little fire. When harvesting, we harvest only a big thing, a small thing transfer a field, after culturing of 1-2 years, harvest at big roots. Harvesting is done usually in an autumn after 3 years. When collecting a seed, we must harvest a heshouwu the next year. 3) Process We must process heshouwu at the decoction of black beans, heshouwu suck in the decoction of black beans, heat with steam in an iron pot. Black beans is used every 100 kg of heshouwu. 4) Quility (1) Funstional standards It is good that weight is heavy and outer skin is yellow-brown, section surface is light red color, powdery and has a figure such as clouds in section. (2) Physicochemical standards Heshouwu expesses a various chang of components in process of working. We think that it need to add a standard of detection about 2,3,5,4'-tetrahrdroxystilbene-2-O-${\beta}$ -D-glucoside in a current authentic document which is a water-soluble component of heshouwu. It must that Dry on loss is less than 14.0%, content of ash is less than 5.0%, Content of acid-nonsoluble ash is less than 1.5%, Content of extract is more than 17.0%. A fixed quantity of 2,3,5,4'-tetrahrdroxystilbene-2-O-${\beta}$ -D-glucoside is more than 1.0%. Contens of heavy metal has to detect less than 30 ppm and there is no reminding agriculural medince.

• 한국전자파학회논문지
• /
• 제23권11호
• /
• pp.1307-1314
• /
• 2012

지하 탐사 레이더(GPR: Ground-Penetrating Radar) 영상에서 지하의 비균일성에 의한 클러터(clutter)의 영향을 저감할 수 있는 고유 영상(eigenimage) 기반의 신호처리 기법을 제시하였다. GPR 탐사의 B-scan 영상에 기존의 고유 영상 필터링 기법을 적용하면 안테나 링잉, 송수신 안테나 간의 직접 결합(direct coupling)과 지표면 반사와 같이 비교적 균일한 클러터는 충분히 제거할 수 있다. 그러나, 지하의 비균일성(inhomogenity)에 의한 불규칙적인 클러터는 제거되지 못한 채 여전히 남아 있어서, 표적 신호(target signal)는 클러터에 의해 왜곡되거나 가려진다. 고유 영상 필터링한 영상들의 동일 픽셀(pixel) 간의 관계를 비교해 보면, 지하의 클러터와 표적에 해당하는 픽셀은 서로 다른 상관성이 존재하였다. 상관성이 높은 픽셀은 강화하면서 상관성이 낮은 픽셀은 저감할 수 있도록 고유 영상 필터링한 영상들에서 동일 픽셀간 기하 평균 신호처리 방법을 제안하였다. 불규칙 매질 분포(random media distribution)를 갖는 비균일 지하 속의 표적에 대한 GPR 탐사를 불규칙 매질 생성 기법(randommedia generation technique)과 시간 영역 유한 차분(FDTD: Finite-Difference Time-Domain)법으로 모의계산하고, 제안한 신호처리 방법을 GPR 탐사의 B-scan 자료에 적용하였다. 제안한 방법은 기존의 고유 영상 필터링에 비해서 지하의 비균일 클러터를 현저히 저감하고, 표적신호는 충분히 강화할 수 있음을 보였다.

• Imaging Science in Dentistry
• /
• 제42권3호
• /
• pp.139-146
• /
• 2012

Purpose: An individual surgical stent fabricated from computed tomography (CT) data, called a CT-guided stent, would be useful for accurate installation of implants. The purpose of the present study was to introduce a newly developed CT-guided stent with a simple design and evaluate the accuracy of the stent placement. Materials and Methods: A resin template was fabricated from a hog mandible and a specially designed plastic plate, with 4 metal balls inserted in it for radiographic recognition, was attached to the occlusal surface of the template. With the surgical stent applied, CT images were taken, and virtual implants were placed using software. The spatial positions of the virtually positioned implants were acquired and implant guiding holes were drilled into the surgical stent using a specially designed 5-axis drilling machine. The surgical stent was placed on the mandible and CT images were taken again. The discrepancy between the central axis of the drilled holes on the second CT images and the virtually installed implants on the first CT images was evaluated. Results: The deviation of the entry point and angulation of the central axis in the reference plane were $0.47{\pm}0.27$ mm, $0.57{\pm}0.23$ mm, and $0.64{\pm}0.16^{\circ}$, $0.57{\pm}0.15^{\circ}$, respectively. However, for the two different angulations in each group, the $20^{\circ}$ angulation showed a greater error in the deviation of the entry point than did the $10^{\circ}$ angulation. Conclusion: The CT-guided template proposed in this study was highly accurate. It could replace existing implant guide systems to reduce costs and effort.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.133-133
• /
• 2008

Recently, as the down-scailing of field-effect transistor devices continues, Schottky-barrier field-effect transistors (SB-FETs) have attracted much attention as an alternative to conventional MOSFETs. SB-FETs have advantages over conventional devices, such as low parasitic source/drain resistance due to their metallic characteristics, low temperature processing for source/drain formation and physical scalability to the sub-10nm regime. The good scalability of SB-FETs is due to their metallic characteristics of source/drain, which leads to the low resistance and the atomically abrupt junctions at metal (silicide)-silicon interface. Nevertheless, some reports show that SB-FETs suffer from short channel effect (SCE) that would cause severe problems in the sub 20nm regime.[Ouyang et al. IEEE Trans. Electron Devices 53, 8, 1732 (2007)] Because source/drain barriers induce a depletion region, it is possible that the barriers are overlapped in short channel SB-FETs. In order to analyze the SCE of SB-FETs, we carried out systematic studies on the Schottky barrier overlapping in short channel SB-FETs using a SILVACO ATLAS numerical simulator. We have investigated the variation of surface channel band profiles depending on the doping, barrier height and the effective channel length using 2D simulation. Because the source/drain depletion regions start to be overlapped each other in the condition of the $L_{ch}$~80nm with $N_D{\sim}1\times10^{18}cm^{-3}$ and $\phi_{Bn}$ $\approx$ 0.6eV, the band profile varies as the decrease of effective channel length $L_{ch}$. With the $L_{ch}$~80nm as a starting point, the built-in potential of source/drain schottky contacts gradually decreases as the decrease of $L_{ch}$, then the conduction and valence band edges are consequently flattened at $L_{ch}$~5nm. These results may allow us to understand the performance related interdependent parameters in nanoscale SB-FETs such as channel length, the barrier height and channel doping.

• 자원리싸이클링
• /
• 제16권6호
• /
• pp.3-9
• /
• 2007

생활 폐기물은 대부분 유리류와 자기류뿐만 아니라 많은 양의 iron을 함유하고 있으며 약 $3{\sim}11%$에 달한다. 대부분의 iron은 Ni-Fe와 Ni-Cr-Fe 같은 합금으로 존재하거나, 부식방지와 광택을 위해 Ni와 Cr로 도금된 iron으로 존재하고 있기 때문에 소각로에서 소각될 경우 철 재품 표면에 심하게 파손된 $Fe_3O_4$층과 함께 $NiFe_2O_4$와 FeCr_2O_4$을 형성하게 되어 바닥재에 존재하게 되어 중금속산화물 층을 형성시킬 수 있다. iron은 자력이 매우 강해 자력선별에 의해 쉽게 선별되며 이러한 효과로 인해 중금속 산화물의 선별까지 얻을 수 있다. 또한 바닥재는 다양한 Ni와 Cr 산화물들을 함유하고 있으며, Ni와 Cr은 강자성을 띈 물질이기 때문에 자력선별에 의해 큰 영향을 받을 수 있다. 따라서 자력선별에 따른 Ni와 Cr의 거동에 대해 조사하였으며 그 밖의 다른 중금속(Cu, Pb, Cd, As)들의 거동 또한 확인해 보았다. 그 결과 Ni와 Cr은 약 $45{\sim}50%$의 선별율을 보였으며, Cu와 Pb는 $15{\sim}20%$을 나타냈다. 또한 자력선별 전과 후의 바닥재에 대해 Ni와 Cr의 용출량을 확인해본 결과 자력선별 후 바닥재의 용출량이 더 낮음을 확인할 수 있었다.

• 한국환경보건학회지
• /
• 제35권6호
• /
• pp.517-525
• /
• 2009

The water quality of Lake Shihwa had been rapidly deteriorating since 1994 due to wastewater input from the watersheds, limited water circulation and the lack of a wastewater treatment policy. In 2000, the government decided to open the tidal embankment and make a comprehensive management plan to improve the water quality, especially inflowing stream water around Shihwa and Banwol industrial complex. However, the water quality and microbial community have not as yet been fully evaluated. The purpose of this study is to investigate the influent water quality around the industrial area based on chemical and biological analysis, and collected surface water sample from the Siheung Stream, up-stream to down-stream through the industrial complex, Samples were collected in July 2009. The results show that the downstream site near the industrial complex had higher concentrations of heavy metals (Cu, Mn, Fe, Mg, and Zn) and organic matter than upstream sites. A combination of DGGE (Denaturing Gradient Gel Electrophoresis) gels, lists of K-WQI (Korean Water Quality Index), cluster analysis, MDS (Multi-Dimensional Scaling) and PCA (Principal Component Analysis) has demonstrated clear clustering between Siheung stream 3 and 4 and with a high similarity and detected metal reducing bacteria (Shewanella spp.) and biodegrading bacteria (Acinetobacter spp.). These results suggest that use of both chemical and microbiological marker would be useful to fully evaluate the water quality.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2001년도 정기총회 및 제3회 특별지포지움
• /
• pp.122-140
• /
• 2001

유류오염물질의 매립 및 국부적인 유류누출에 의한 토양오염지역에서 시험탐사구역을 설정하고 전기, 전자탐사 기술을 위주로 물리탐사 기술을 적용하여 매설물 탐지 및 오염범위 규명 가능성을 시험하였다. 먼저 매설관로 및 매립지역의 탐지에는 GPR 탐사와 더불어 다중주파수 이동송수신 전자탐사가 매우 효과적인 것으로 판명되었다 한편 수직 및 수평구배 측정방식 자력탐사의 경우 지표에 많이 존재하는 금속 파편 등에 의한 반응이 우세하여 매설관로 등의 탐지는 어려웠다. 유류오염 범위의 규명을 위해서는 전기비저항 탐사와 전자탐사, GPR 탐사가 적용되었다. 먼저 전기비저항 탐사자료의 2차원 역산 결과 및 공간 필터링을 적용한 후의 전자탐사 자료의 1차원 역산 결과로부터 각각 심도별 전기비저항 분포 영상을 작성하였다. 유류오염대가 주변 실트층에 비해 전기비저항이 높다는 가정하에 고비저항 이상대의 분포범위를 해석하였는데, 전기비저항 탐사와 전자탐사자료가 서로 잘 일치하였으며, 시료분석에 의한 오염범위와 대체적으로 일치하였다. GPR 탐사에서는 이 지역의 오염 특성상 유류오염 Plume에 의한 반사신호 등은 기록되지 않았으며, 단지 신호 에너지의 투과심도로부터 오염지역을 추정하였는데, 전기 및 전자탐사자료 해석의 보조적인 정보 제공 수준이었다 이러한 결과로부터 유류오염부지 조사를 위한 물리탐사기술의 적용성을 정리하였고 효과적인 탐사 흐름도를 제시하였다.