• 한국실내디자인학회논문집
• /
• 제16권5호
• /
• pp.98-106
• /
• 2007

With the recent increase in the amount of interior materials, the medium-density fiberboard(MDF) has continued to be produced at an increasing rate. Accordingly, to prevent the deformation of MDF after its construction, secure the precision of its finishing and improve the performance of its design, this study attempted to investigate the effect of environment humidity conditions on flatness according to the field used in MDF and its relationship to other physical properties. An attempt was made to conduct this study by changing the conditions of surface treatment by moisture and by thickness. For this purpose, it is judged that it is desirable to prevent scheme to maintain the flatness by defining the coefficient of water absorption-induced length change as in the regulation on low-density soft fiberboard and adjusting the standard for wet bending strength upward. It is thought that is further studies will be conducted about the effect of material, adhesive and thermal pressure condition, production system and processing method used in MDF on its scheme to maintain the flatness and changes in length and thickness expansion.

• Journal of the Korean Wood Science and Technology
• /
• 제41권4호
• /
• pp.293-301
• /
• 2013

본 연구에서는 수분 흡착효과가 있다고 알려진 커피박을 첨가하여 중밀도섬유판을 제조한 다음 물성과 강도특성을 조사하여 커피박의 중밀도섬유판 원료로써의 가능성을 확인하고자 하였다. 커피박은 주로 인스턴트커피 제조 시 많이 발생하는 찌꺼기인데 가수분해된 것을 전건무게 기준 3, 6, 9% 수준에서 목섬유와 혼합해 중밀도섬유판을 제조하였으며, 이 때 사용한 접착제는 요소수지접착제였다. 커피박과 목섬유를 섞은 중밀도섬유판에 대해 물성과 강도 특성 및 포름알데히드 방산량을 측정하였다. 커피박과 목섬유를 무작위로 섞어 제조한 중밀도섬유판의 휨강도와 박리강도는 모두 KS 기준보다 높게 나타났으며 커피박을 층으로 구성한 적층 성형구조 경우에는 모두 기준에 미달하였다. 제조된 중밀도섬유판의 흡수 두께팽창률은 시판용 중밀도섬유판보다 낮아 물리적 특성 면에서 현저히 개선됨을 보여주었다. 포름알데히드 방산량은 시판용 중밀도섬유판과 유사한 것으로 나타났으며 모두 KS 기준상의 $E_1$급에 부합하였다. 이런 결과는 커피박이 친환경 중밀도섬유판 제조 시 원재료로 활용될 수 있음을 보여주고 있으며 중밀도섬유판의 성능 향상을 위해서는 접착제와 커피박 간의 상호 접착성 및 커피박의 흡착성능 향상을 위한 전환방법에 대한 추가 연구가 요구된다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.32-39
• /
• 1996

The overall purpose of this study was to investigate the dimensional changes of melamine sheet laminated medium density fiberboard(MDF) floorings by sub-heating system(Ondol). This study was also conducted to improve the properties of melamine sheet laminated MDF floorings. The effects of density, resin content, manufacturing speed of MDF and types of melamine sheet on dimensional and weight changes of floorings were investigated. The results were as followings. 1. Dimensional and weight change of melamine sheet laminated MDF flooring by heating decreased with decreasing the density of MDF. 2. Dimensional and weight change of melamine sheet laminated MDF flooring by heating decreased with increasing the resin content of MDF. 3. Dimensional and weight change of melamine sheet laminated MDF flooring by heating decreased with decreasing the manufacturing speed of MDF. 4. Dimensional change of melamine sheet laminated MDF flooring in width direction by heating was doubled than that in machine direction. 5. Dimensional change and curling of high pressure melamine laminate(HPM) laminated MDF flooring by heating was less than those of low pressure melamine laminate(LPL) flooring. 6. Weight loss of melamine sheet laminated MDF flooring by heating has linear relationship with shrinkage.

• Journal of the Korean Wood Science and Technology
• /
• 제42권5호
• /
• pp.615-623
• /
• 2014

Increases of public attention on healthy environment lead to the regulation of indoor air quality such as Clean Healthy House Construction Standard. This standard covers emission of total volatile organic compounds (TVOCs) (e.g., formaldehyde, benzene, and toluene), ventilation, and use of environmentally-friendly products or functional products. Moisture absorption and desorption abilities are a recommended functionality for improving indoor air quality. In this study, moisture absorption and desorption capacities of carbonized board from wood-based panels and other materials were determined by using UNT-HEAT-01 according to ISO 24358:2008. Pine had higher moisture absorption and desorption capacities ($49.0g/m^2$ and $35.3g/m^2$, respectively) than hinoki cypress, cement board, gypsum board, oriented strand board, and medium density fiberboard (MDF). The moisture absorption and desorption capacities differed considerably according to the wood species. After carbonization process at $400^{\circ}C$, the absorption and desorption ability of MDF increased to 38% and 60%, respectively. However, moisture absorption and desorption capacities decreased with increasing carbonization temperature, but they were still higher than original MDF. Therefore, it is suggested that carbonization below $600^{\circ}C$ can improve moisture absorption/desorption capacities.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.594-596
• /
• 2012

최근 야외 방송 및 공연에 대한 수요가 많아지고 있다. 이에 따라, 외부의 비와 같은 환경에서는 설치된 스피커에 침수와 같은 손상을 입을 수 있고, 이로 인해 진동 및 소음이 발생할 수 있다. 이에 따라, 본 논문은 이동용 라우드 스피커(Loud Speaker)의 방수효과를 개선하기 위한 실험적 연구를 수행하였다. 스피커의 성능 시험을 위해 MDF(Medium Density Fiberboard)를 이용하여 인클로저(Enclosure)를 제작하였고, 방수효과비교 실험을 위해 3가지의 마감재 즉 일반 페인트(Paint), 시트지(Sheet Paper), FRP(Fiber Reinforced Plastics)를 제안하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.913-922
• /
• 2016

This study attempted to measure molecular weight (MW) of melamine-urea-formaldehyde (MUF) resins prepared by two different synthesis methods: the one-step MUF resins were synthesized in one batch procedure, while the two-step MUF resins were prepared by a physical mixing of urea-formaldehyde (UF) resin with melamine-formaldehyde (MF) resin that had been synthesized in a separate procedure. The properties of medium density fiberboard (MDF) panels bonded with two types of MUF resins were also investigated. MWs of these MUF resins were measured using gel permeation chromatography (GPC). In addition, this study measured the MWs of one-step MUF resin during its synthesis procedure. The performance of two types of MUF resins was evaluated by determining properties of MDF panels prepared in laboratory. As the synthesis procedure progressed, both number average MW ($M_n$) and weight average MW ($M_w$) of one-step MUF resin gradually increased, while the polydispersity index (PDI) decreased. And low Mw species of the resin predominantly decreased as the synthesis step progressed. The one-step MUF resin showed greater $M_n$ and $M_w$ than those of the two-step ones even though the PDI values of both resins were very similar each other. As expected, the one-step MUF resin resulted in better properties of MDF panels than those of two-step resins. In particular, the one-step MUF resin provided better internal bond (IB) strength and thickness swelling (TS) with MDF panels than those of two-step ones, indicating better water resistance of the one-step resin. These results suggest that the preparation method of MUF resins have a great impact on the MW and final panel properties.

• 한국가구학회지
• /
• 제13권1호
• /
• pp.19-25
• /
• 2002

Modern furniture is mostly made of panel products such as a glue-up panel, a particle board and a medium density fiberboard(MDF). Warping is a major defect of these panel products resulting in degrading final products. In this study the factors related to the warping of a glue-up panel and MDF were investigated by comparing the physical properties of warped specimens with those of the unwarped. The differences between the moisture contents measured on the both surfaces of specimens were found to mainly influence the warping of glue-up panel specimens whether conditioned or not. The average oven-dry density of warped glue-up panel specimens was definitely higher than that of the unwarped at l% significance level. For MDF the influencing factor on warping has not been revealed yet, however it was found that the conditioning reduced the number of warped specimens.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.91-100
• /
• 2012

This study analysis the effect of various temperatures (20, 35 and $50^{\circ}C$) on the formaldehyde emission from wood composites, which were particleboard (PB), medium density fiberboard (MDF), high density fiberboard (HDF) and laminated HDF (L-HDF) by Japanese desiccator method. Also, to reduce formaldehyde emission by wood composites, it has been suggested that undergo a bake-out conditions. On average, the level of formaldehyde emission increased many times with a $15^{\circ}C$ increase in temperature from 20 to $35^{\circ}C$ for PB, MDF, HDF and L-HDF, respectively. Formaldehyde emissions from wood composites could be expected to increase with increasing ambient temperature. At $35$ for 28 days bake-out treatment of boards, the free formaldehyde emission reduced 67.8% (PB), 40.1% (MDF), 37.8% (HDF), and 35.2% (L-HDF). On the other hand, after the bake-out at $50^{\circ}C$ for 28 days, the formaldehyde concentration decreased by 88.2, 66.9, 62.2 and 59.3% of the concentration before the bake-out for PB, MDF, HDF and L-HDF, respectively. An interesting of the bake-out treatment at $50^{\circ}C$ after 14 days, formaldehyde emission grade of PB & MDF down $E_2$ to $E_1$, and HDF & L-HDF down $E_1$ to $E_0$.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.231-244
• /
• 2020

As a way of finding value-added materials from waste medium density fiberboard (MDF), this study characterized cellulose nanocrystals (CNCs) isolated by ammonium persulfate (APS) oxidation using recycled MDF fibers. Chemical composition of the recycled MDF fibers was done to quantify α-cellulose, hemicellulose, lignin, nitrogen, ash and extractives. The APS oxidation was performed at 60 ℃ for 16 h, followed by ultrasonication, which resulted in a CNC yield of 11%. Transmission electron microscope images showed that rod-like CNCs had an average length and diameter of 167±47 nm and 8.24±2.28 nm, respectively, which gave an aspect ratio of about 20. The conductometric titration of aqueous CNCs suspension resulted in a carboxyl content of 0.24 mmol/g and the degree of oxidation was 0.04. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy clearly showed the presence of carboxyl group on the CNCs prepared by the APS oxidation. The change of pH of the aqueous CNC suspension from 4 to 7 converted the carboxyl group to sodium carboxylate group. These results showed that the APS oxidation was facile and CNCs had a one-step preparation method, and thus suggested an optimization of the oxidation condition in future.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.101-109
• /
• 2012

Wood composites are a hygroscopic material and have ability to exchange its moisture content with air. This study investigated the formaldehyde emission and moisture content change of four wood composites (particleboard (PB), medium density fiberboard (MDF), high density fiberboard (HDF), laminated HDF (L-HDF)) as a function of bake-out temperature and time. The composites were baked out for 1, 3, 5, 7, 10, 14, 21, and 28 days at temperatures of $20{\pm}2$, $35{\pm}2$, and $50{\pm}2^{\circ}C$ in a dry oven. The moisture content change was used to determine the emission bake-out of the composites. Best bake-out time results were obtained with after 7 days all composites. Formaldehyde emission values of composites decreased with decreasing moisture content for both temperatures. The formaldehyde emission results of bake-out temperature 35 and $50^{\circ}C$ showed a similar tendency.