• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.4
• /
• pp.307-320
• /
• 1989

This paper presetns new design of the Modified Chemical Vapor Deposition(MCVD) system for optical fiber preform fabrication. It contains a glass working lathe, raw material supplier and exhaust gas treatment apparatus as fundamental instruments for MCVD process, graded index fiber design, characteristic of process and the experimenta arrangement to measure the refractive index profile of MCVD preforms, respectively. From the investigation results, it is shown that an ideal graded index fiber preform does not exhibit a center dip or bump.

• 한국연소학회:학술대회논문집
• /
• 2001.06a
• /
• pp.75-81
• /
• 2001

MCVD(modified chemical vapor deposition) used in making optical-fiber currently utilizes the hydrogen-oxygen burner as a energy supply source. To improve the productivity and to reduce the manufacturing cost of optical-fiber, a natural gas-oxygen burner has been developed. The manufacturing processes of optical-fiber consist of vapor deposition, collapse and drawing processes. Among these processes, the vapor deposition and the collapse processes are important in terms of improving the productivity and saving the production cost. The vapor deposition and collapse processes are performed by combustion heat and flame force supplied by a burner. So the flame force of the burner used in these processes is required to have an optimal and consistent value in order to allow uniform heating and collapse of quartz tube. In this regard, the momentum ratio of natural gas and oxygen has been optimally determined by modification of a burner and the inlet flow pass also has been modified.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.4
• /
• pp.608-613
• /
• 2000

The present study has proposed a novel aerosol CVD utilizing an internal jet in the conventional MCVD reactor for the purpose of enhancing the deposition efficiency(and rate) and the uniformity of deposited film. The use of impingement of high temperature jet through a thin inner tube ensures the reduction of non-uniform particle deposition zone as well as higher thermophoretic particle deposition. It is shown that significant improvements have been achieved for both aspects of deposition efficiency and uniformity. As jet temperatures increase, the tapered length is reduced and deposition efficiency is significantly increased.

• Journal of the Korean Ceramic Society
• /
• v.32 no.11
• /
• pp.1246-1254
• /
• 1995

A numerical model for fabrication and deposition of ultrafine SiO2 particles were proposed in the simplified horizontal MCVD apparatus using tube furnace reactor. The model equations such as energy and mass balance equations and the 0th, 1st and 2nd moment balance equations of aerosols were considered in the reactor. The phenomena of SiCl4 chemical reaction, SiO2 particle formation and coagulation, diffusion and thermophoresis of SiO2 particles were included in the aerosol dynamic equation. The profiles of gas temperature, SiCl4 concentration and SiO2 particle volume were calculated for standard conditions. The concentrations, sizes and deposition efficiencies of SiO2 particles were calculated, changing the process conditions such as tube furnace setting temperature, total gas flow rate and inlet SiCl4 concentration.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.3057-3065
• /
• 1994

An experimental study has been made for heat transfer and particle deposition during the Modified Chemical Vapor Deposition process which is currently utilized to manufacture high quality optical waveguides. The distributions of tube wall temperatures, rates and efficiencies of particle deposition were measured. Results indicate that the temperature distributions of the tube wall in the axial direction yield the quasi-steady form in which temperature distributions fit in one curve if the relative distance from the moving torch is used as an axial coordinate. Due to the repeated heatings from the traversing torch, the wall temperatures are shown to reach the minimum ahead of torch and it is shown that the two torch formulation suggested by Park and Choi is valid to predict this minimum temperature. Measured wall temperatures, particle deposition efficiencies and tapered entry length are compared with the previous modelling results and shown to be in agreement.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.178-184
• /
• 1990

The fiber laser was fabricated using Nd doped single mode fiber. The fiber was made by MCVD and solution doping method, and the Fabry-Perot resonator was composed with two dichroic mirrors. It was operated at 1.096 um with 15 nm bandwidth. When the reflectivity of the output copuling mirror was 67.5%. the maxiurn output power 1.88 mw and its slope efficiency 1.28%. was obtained.

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.71-71
• /
• 1996

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.5
• /
• pp.670-677
• /
• 1999

An analysis of generation and growth of multicomponent particles has been carried out to predict the size and composition distributions of particles generated in the Modified Chemical Vapor Deposition(MCVD) process. In MCVD process. scale-up of sintering and micro-control of refractive index may need the Information about the size and composition distributions of $SiO_2-GeO_2$ particles that are generated and deposited. The present work solved coupled steady equations (axi-symmetric two dimensions) for mass conservation, momentum balance. energy and species(such as $SiCl_4$, $GeCl_4$, $O_2$, $Cl_2$) conservations describing fluid flow. heat and mass transfer in a tube. Sectional method has been applied to obtain multi-modal distributions of multicomponent aerosols which vary in both radial and axial directions. Chemical reactions of $SiCl_4$ and $GeCl_4$ were included and the effects of variable properties have also been considered.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.124-125
• /
• 2004

Eu$^{2+}$ doped optical fibers were developed for magneto-optical application by use of CO gas as a reduction agent during MCVD process and the Verdet constant of the Eu$^{2+}$ doped fiber was found to be -0.819[rad/T ${\cdot}$ m], which is three times larger than that of the Eu$^{3+}$ doped fiber.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.507-508
• /
• 2006

Sol-gel 및 MCVD 공정을 사용하여 Ag 가 함유된 광섬유를 제조하였다. KrF 엑시머 레이저에서 출력된 248 nm 의 UV 빔을 광섬유에 조사한 경우 450 nm 를 중심으로 광흡수가 6 dB/cm 로 급격히 증가하는 것을 확인할 수 있었으며, 이는 UV 레이저 조사에 의한 Ag 나노입자 형성에 따른 것으로 추측된다.