• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.859-863
• /
• 2023

In this study, simple and portable radiation detection system using X-ray intensifying screen, optical sensor and micro-controller unit for education was proposed. The system was simply composed of detection unit consisting of an optical sensor and intensifying screen, micro-controller unit, and was designed to be suitable for portable. Radiation was measured using developed detection system and absorbed dose dosimeter with changing tube voltage from 50 to 100 kVp. The tube current and SDD were fixed on 100 mAs and 100 cm, and dose were measured repeated ten times at each tube voltage. The response and linearity of the detection system were confirmed using the measured values. It was confirmed that the comparison measurement results of the detection system and absorbed dose dosimeter showed a high correlation(r : 0.998, p<.001). In this results, the feasibility of the detection system with intensifying screen and micro-controller unit based was confirmed, and we considered that the developed detection system could be applied to portable, compact, low cost system for education.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.31-36
• /
• 2015

In this paper, an LED lighting system that is capable of automatic or maunal dimming control using a ultrasonic sensor and Bluetooth wireless communication technology is presented. The LED lighting system consists of a ultrasonic sensor, microcontroller unit, Bluetooth wireless communication, LED driver, and LED light source. By using the implemented LED lighting system sample, it is shown that the automatic and manual dimming control is realized. By using the ultrasonic sensor, the LED lighting is automatically brighter or dimmer depending on the distance between the sensor and an object. When using a smartphone that includes Bluetooth wireless communication function, one can not only manually control the brightness of the LED lighting from level 1 to 10, but also monitor the distance between the sensor and object on the smartphone.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.29-36
• /
• 2009

In this paper, we proposed auto exposure(AE) algorithm and hardware implementation for apply to mobile phone camera. AE is a function that control camera exposure automatically for appropriate to object. Existing AE is using micro controller unit and there are some problems about high expense and slow processing speed. For improve these problems, we proposed AE algorithm for hardware implementation without micro controller unit therefor we can expect improvement about the content of a production and operation speed. We proposed the algorithm that is considered efficiency of hardware resource and the results of hardware implementation of proposed AE algorithm apply to mobile phone camera sensor, we verified proposed AE function.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.173-179
• /
• 2017

Autobike is insufficient of car navigation informations and high of accident dangerousness comparing to car. So if a system providing autobike driver's driving information and e-call function is developed using smart helmet consisting of collision perception sensor, rear camera, bluetooth communication module, MCU and HUD, It is very useful and can decrease of person's damage and handle expeditious traffic accident during autobike accident. In this paper, when this, "Providing system of autobike driver's information and e-call function", software is developed, a proper analysis and design method for practical affairs try to be presented due to showing software development analysis method, architecture of hardware block-diagram, flowchart and UI design.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.1-10
• /
• 1997

It is well-known that rectangular bulk-Si sensors prepared by etch or epi etch-stop micromachining technology are already in practical use today, but the conventional bulk-Si sensor shows some drawbacks such as large chip size and limited applications as silicon sensor device is to be miniaturized. We consider a circular-shape SOI(Silicon-On-Insulator) micro-cavity technology to facilitate multiple sensors on very small chip, to make device easier to package than conventional sensor like pressure sensor and to provide very high over-pressure capability. This paper demonstrates the cross-functional results for stress analyses(targeting $5{\mu}m$ deflection and 100MPa stress as maximum at various applicable pressure ranges), for finding permissible diaphragm dimension by output sensitivity, and piezoresistive sensor theory from two-type SOI structures where the double SOI structure shows the most feasible deflection and small stress at various ambient pressures. Those results can be compared with the ones of circular-shape bulk-Si based sensor$^{[17]}. The SOI micro-cavity formed the sensors is promising to integrate with calibration, gain stage and controller unit plus high current/high voltage CMOS drivers onto monolithic chip.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.7
• /
• pp.1302-1308
• /
• 2010

In this study, Zigbee Sensor Node to transmit harmful gases CO and $CO_2$ information using wireless communication within the ground and underground structures were developed. Wireless communication protocol was used Zigbee Stack included IEEE 802. 15.4 MAC protocol. For wireless transmission of detected harmful gas signal from ADC of MCU was implemented Zigbee Sensor Node that was developed protocol using Serial-Port-Profile(SPP) here. The proposed Zigbee Sensor Node was verified transmission distance from experiments. Transmission distance was into 90m in experiments. Distance experiments were measured at 10m intervals using sine & pulse wave input signal at indoors. The proposed Route Sensor Node was applied mesh routing protocol. When built up USN(Ubiquitous Sensor Network)using Route Sensor Node, transmission distance was not limited. On the experimental results, harmful gas values between direct measurements and USN measurements were consistent. The semiconductor CO sensor and N-DIR $CO_2$ sensor module as a harmful sensor was used. Therefore, the proposed Zigbee Sensor Node was verified about reliability and validity to build USN for transmission of harmful gas information.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.54-58
• /
• 2012

In this paper, we implemented total monitoring system in which LED light turned on only when user detected and LED light turned out only when user disappeared. This system is composed of two modules, one is HW board based on Micro Controller and the other is SW control system based on Web server. Micro controller board is based on ATMega2560 chip which is connected with Infra Red and Ultra sonic sensors. Web based monitoring system was designed can be used in smart device. The validity of this monitoring system was proved by integration test of two modules.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.4
• /
• pp.9-19
• /
• 2019

As light-weight embedded devices become widely used in the area of low-power networking and high-precision sensor data acquisition, support for time-critical applications becomes essential for the light-weight embedded devices. This paper addresses the accuracy issue of a software timer for small or tiny embedded devices equiped with light-weight MCUs(Micro controller units). We first explore the characteristics of overhead in a typical implementation of a software timer, and then measure the overhead through a realistic implementation. Using the measurement result, we propose an overhead compensation technique which reduces the overhead from the hardware timer-tick.

• Ocean and Polar Research
• /
• v.45 no.2
• /
• pp.33-42
• /
• 2023

Dissolved oxygen (DO) is a crucial parameter for assessing environmental conditions in aquatic ecosystems. However, commercial in situ dataloggers for oxygen optodes can be relatively expensive and limited in their specifications. In this paper, we present a novel design for a DO datalogger system based on the control boards family with RP2040 MCU chipset. Our design includes two types of dataloggers: a simple logging system and a programmable system for sampling rates via magnetic switches underwater for divers. We provide detailed descriptions of the system, including the MicroPython source code and drawings to aid in construction. We also discuss the various applications of our DO datalogger system in monitoring dissolved oxygen concentration in coastal waters and assessing the benthic metabolism of aquatic ecosystems. Our DO datalogger system provides an affordable and flexible option for researchers to accurately monitor DO concentrations in aquatic environments, and thereby improve our understanding of these complex ecosystems.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.307-309
• /
• 2024

세계적으로 물류 자동화 시장은 2026년까지 약 44조원으로 예상되며, 연평균 10.6%의 성장률을 기록할 것으로 예측된다. 특히 국내 시장은 2025년까지 연평균 성장률 11.5%로 1조원 이상으로 전망되고 있다. 2025년까지 물류 자동화 시장은 270억 달러로 급성장할 것으로 예상되며, 반도체 분야에서 로봇이 상품 입고, 보관, 상품 피킹, 분류, 출고 작업을 담당하는 트렌드가 강조된다. 본 논문은 반도체 물류 분야를 대상으로 작은 크기와 민첩성을 갖춘 로봇을 개발하여 작업 공간을 효율적으로 활용하고 인력을 최소화하려는 목적이다. 수직 및 수평 로봇은 효율적인 자동화 시스템을 제공하며, UI를 사용하여 AGV, 선반, 스카라 로봇을 하나의 통합 시스템으로 개발하고자 한다. 특히 코드 인식, 초음파 센서, 아두이노 MCU, 스카라 로봇, AGV 등을 활용한 로봇 시스템을 개발하여 반도체 물류 작업을 효율적으로 수행하고자 한다. 다양한 분야에서 활용 가능한 스카라 로봇을 개발하기 위해 마이크로 스텝과 풀리, 타이밍 벨트를 이용한 구동 방식 등을 채택한다. 반도체 물류 센터에서의 자동화는 물류 공간의 확대와 인건비 절감을 기대할 수 있으며, 로봇 및 드론을 활용하여 인건비 절감과 효율성 향상을 통해 기업 비용 절감에 기여할 것으로 예상된다.