• 제목/요약/키워드: MATLAB simulink

검색결과 1,122건 처리시간 0.029초

Matlab Simulink를 이용한 회전안정탄의 6 자유도 탄도 모델링 (6 - DOF Trajectory M&S of Spin - stabilized Munitions using Matlab Simulink)

  • 김기표;윤상용;김진석;홍종태
    • 시스템엔지니어링학술지
    • /
    • 제2권2호
    • /
    • pp.39-44
    • /
    • 2006
  • With the advent of low cost, miniature and high-g hardened inertial sensors and actuators, many kind of smart munitions are becoming practical such as 1D or 2D TCM, SFM, Range Extended GPS guided munitions and so on. They have more complicated trajectory control algorithm than conventional munitions'. Therefore it is necessary to study the complicated operation algorithm of smart munitions with M&S in advance of developing them. The purpose of this paper is to introduce a practical M&S method to study an operation concept of smart munitions using PRODAS and Matlab.

  • PDF

MATLAB/SIMULINK의 임베디드 타겟을 이용한 영구자석 동기 전동기 구동시스템의 제어기 설계 (Controller Design of PMSM Drive System Using Embedded Target in MATLAB/SIMULINK)

  • 이용석;지준근;차귀수
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2007년도 추계학술발표논문집
    • /
    • pp.148-151
    • /
    • 2007
  • 본 논문은 표면 부착형 영구자석 동기전동기 벡터제어 시스템의 속도 및 전류제어와 과변조 기법을 MATLAB/SINULINK의 TI C2000 임베디드 타겟을 이용한 모델기반 제어기 설계방법으로 구현하였고, Mathwork사에서 제공하는 Demo 프로그램의 속도 및 전류제어와 과변조 기법을 비교하여 보았다. 먼저 각 제어기에 대한 구조를 설명하고, 각각의 응답에 대한 시뮬레이션과 실험을 통해 비교 검증하였다.

  • PDF

SIMULINK를 이용한 분리형 노즐을 갖는 터보팬엔진 성능모델 구성 및 탈설계점 성능 해석 (Performance Modeling and Off-design Performance Analysis of A Separative Jet Turbofan Engine Using SIMULINK)

  • 공창덕;박길수;이경선
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2012년도 제38회 춘계학술대회논문집
    • /
    • pp.219-224
    • /
    • 2012
  • 본 연구에서 중형 상용민간항공기 추진진기관인 분리형 노즐을 갖는 2 스풀 터보팬 엔진인 BR715-56의[1] 정상 성능모델을 구성 및 탈설계점 성능해석이 상용코드인 MATLAB/SIMULINK를[2] 이용하여 엔진성능특성과 엔진진단을 위해 수행되었다. 먼저 팬, 고압압축기, 고압터빈, 저압터빈 구성품 성능 맵들이 축척방법을 이용하여 유사성능 맵들을 축척하여 생성되었고 다음 탈설계점 성능모사 프로그램이 구성품들 간 유량과 일 조화에 의해 구성되었다. 모델은 용이한 정상 및 동적 모사와 사용자 편의의 장점을 갖는 SIMULINK 프로그램을 이용하여 개발되었다. 제안한 모델에 의한 탈설계점 해석 결과들은 다양한 작동 조건들에서 GASTURB에 의한 해석 결과들과 잘 일치함이 확인 되었다.

  • PDF

4x4 MIMO 알고리즘 구현 및 결과에 대한 검증 방법 (Verification method for 4x4 MIMO algorithm implementation and results)

  • 최준수;허창우
    • 한국정보통신학회논문지
    • /
    • 제19권5호
    • /
    • pp.1157-1162
    • /
    • 2015
  • 본 논문에서는 OFDM 기반의 4x4 MIMO 알고리즘을 설계 및 구현을 하였으며, 구현된 결과를 검증하기 위한 방법을 제시한다. 알고리즘은 MRVD와 QRM-MLD을 적용했다. Matlab과 Simulink를 이용하여 채널 추정 및 MIMO 알고리즘을 Floating-point와 Fixed-point 모델로 설계하였다. 그 다음 Modelsim을 이용하여 VHDL로 구현한다. 구현된 알고리즘의 성능 검증을 위해 설계한 Simulink 모델과 Modelsim 시뮬레이션, ISE ChipScope, 그리고 오실로스 코프로 측정한 결과를 비교하는 방법을 사용하였다. 이 방법은 시스템이 완성되지 않은 상태에서 구현된 알고리즘을 검증하는 방법이다. 검증 결과 ChipScope의 결과와 오실로스코프의 결과가 동일함을 확인하였고, 백홀 시스템에 적용이 가능함을 확인하였다.

Embedded Target을 이용한 DC Motor제어가 설계 및 구현 (Design and Implementation for DC Motor controller Using Embedded Target)

  • 신위재
    • 융합신호처리학회논문지
    • /
    • 제13권1호
    • /
    • pp.56-62
    • /
    • 2012
  • 이 논문은 매트랩/시뮬링크에서 도입한 TI 2000 DSP 라이브러리를 위한 임베디드 타켓을 사용하여 직류 모터 시스템에 대한 속도 제어기를 설계하고 구현하였다. 속도 제이기는 매트랩/시뮬링크 프로그램을 사용하여 쉽게 설계하고 구현할 수 있다. 모터 속도의 궤환은 속도 감지기로 엔코드와 펄스미터를 사용하여 eZdsp F2812 의 A/D 변환기를 통하여 처리하였다. 제어기의 실시간 프로그램은 시뮬링크를 사용하여 그렸고, P 제어기, PID 제어기 그리고 매개변수 추정 을 기반 적응제어기의 변환된 프로그램 코드는 Realsys eZdsp 2812 보드로 다운로드하였다. 그리고 실험을 통하여 구현된 제어기들의 속도응답을 확인하였다. 제어대상이 변경되었을 때에도 제어기를 쉽게 설계 및 구현하는 방법을 연구했다.

SV_PWM을 이용한 유도전동기구동시스템의 SIMULINK 모델링 (SIMULINK Modeling for Induction Mortor Drive System using SV_PWM)

  • 이학주;김민태;성세진
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 하계학술대회 논문집 F
    • /
    • pp.2143-2145
    • /
    • 1997
  • SV_PWM inverter for Induction motor drive system was designed at SIMULINK environment in MATLAB. This paper was performed the analysis of output current harmonics using DSP blockset. It was roved in this paper that SV_PWM method has been ore effective than triangle comparison PWM method on harmonic reduction at steady state.

  • PDF

Simulink를 이용한 공간전압벡터 PWM 인버터 모델링 및 시뮬레이션 (Space Voltage Vector PWM Modeling and Simulation Using Simulink)

  • 황재호
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2000년도 전력전자학술대회 논문집
    • /
    • pp.413-416
    • /
    • 2000
  • 본논문에서는 유도전동기 속도 및 토크 제어시 고조파의 왜형률을 감소시키고 디지털 구현이 용이하며 선형제어 영역을 증가시킬 수 있는 스위칭 방식으로 Space voltage Vector PWM(Pulse Width Modulation) 설명하였으며 시뮬레이션하기 위한 user_tool로써 Matlab/Simulink를 이용하여 SVPWM을 구현하는 방법을 설명하였다 결과적으로 개루프 운전 시 유도기에 인가되는 기준전압을 각각 비과변조와 과변조 시 전압비율 변경방식을 사용하여 나타나는 응답으로 가상스위칭 시간 T1, T2, T0 와 속도, 상전류, 토크응답을 알아보았다.

  • PDF

Simulink에서 풍력발전 연계시스템의 전압변동 시뮬레이션 (Simulation for voltage fluctuations of Grid-connected Wind Turbine Generators by Simulink)

  • 안덕근;노경수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 B
    • /
    • pp.1389-1391
    • /
    • 2003
  • The development of wind turbine power generation has grown during the past ten years. An important question, when installing wind turbines with the generator connected directly to the grid, is holt much the voltage quality will be affected by the uneven power production and by the connection of the wind turbine to the grid. This paper presents the voltage fluctuation of grid-connected WTG(wind turbine generators) by MATLAB/Simulink.

  • PDF

TOF 센서용 3차원 Depth Image 추출을 위한 고속 위상 연산기 설계 (A Design of High-speed Phase Calculator for 3D Depth Image Extraction from TOF Sensor Data)

  • 구정윤;신경욱
    • 한국정보통신학회논문지
    • /
    • 제17권2호
    • /
    • pp.355-362
    • /
    • 2013
  • TOF(Time-Of-Flight) 센서에 의해 획득된 정보로부터 3차원 깊이 영상(depth image)을 추출하기 위한 위상 연산기의 하드웨어 구현을 기술한다. 설계된 위상 연산기는 CORDIC(COordinate Rotation DIgital Computer) 알고리듬의 vectoring mode를 이용하여 arctangent 연산을 수행하며, 처리량을 증가시키기 위해 pipelined 구조를 적용하였다. 고정 소수점 MATLAB 모델링과 시뮬레이션을 통해 최적 비트 수와 반복 횟수를 결정하였다. 설계된 위상 연산기는 MATLAB/Simulink와 FPGA 연동을 통해 하드웨어 동작을 검증하였으며, TSMC 0.18-${\mu}m$ CMOS 셀 라이브러리로 합성하여 약 16,000 게이트로 구현되었고, 200MHz@1.8V로 동작하여 9.6 Gbps의 연산 성능을 갖는 것으로 평가되었다.

Power control strategies of a DC-coupled hybrid power system for a building microgrid

  • Cho, Jea-Hoon;Hong, Won-Pyo
    • 조명전기설비학회논문지
    • /
    • 제25권3호
    • /
    • pp.50-64
    • /
    • 2011
  • In this paper, a DC-coupled photovoltaic (PV), fuel cell (FC) and ultracapacitor hybrid power system is studied for building microgrid. In this proposed system, the PV system provides electric energy to the electrolyzer to produce hydrogen for future use and transfer to the load side, if possible. Whenever the PV system cannot completely meet load demands, the FC system provides power to meet the remaining load. The main weak point of the FC system is slow dynamics, because the power slope is limited to prevent fuel starvation problems, improve performance and increase lifetime. A power management and control algorithm is proposed for the hybrid power system by taking into account the characteristics of each power source. The main works of this paper are hybridization of alternate energy sources with FC systems using long and short storage strategies to build an autonomous system with pragmatic design, and a dynamic model proposed for a PV/FC/UC bank hybrid power generation system. A simulation model for the hybrid power system has been developed using Matlab/Simulink, SimPowerSystems and Matlab/Stateflow. The system performance under the different scenarios has been verified by carrying out simulation studies using a practical load demand profile, hybrid power management and control, and real weather data.