• 감성과학
• /
• 제20권2호
• /
• pp.171-178
• /
• 2017

캥거루 케어의 특징을 반영하여 신생아의 감성에 긍정적인 영향을 미치는 스마트 감성 매트(SSM; Smart Sensibility Mat)를 개발, 제작하였다. 청감 자극의 경우 사전에 녹음된 어머니의 심장박동소리와 목소리를 30dB로 제공할 수 있는 블루투스 스피커를 매트에 삽입하였다. 촉감 자극의 경우 $32^{\circ}C$의 일정한 온도를 제공하기 위해 실리콘 소재의 온수 튜브를 매트의 표면에 삽입하고 자동온도조절장치와 연결하였다. 매트의 전체에 균일한 온도 제공을 위해 열전도성 실을 삽입한 직물을 매트 표면에 부착하였다. 면 패드로 매트를 감싼 후 피부 접촉과 비슷한 촉감 자극을 주기 위해 폴리우레탄 폼을 매트 표면에 접착하였다. SSM이 신생아의 감성에 미치는 효과를 보기 위해 생후 2주 이내의 건강한 신생아 10명을 대상으로 일반 매트(GM; General Mat) 및 SSM에 있을 때 생리신호인 심박수, 호흡수와 체온을 10분 간격으로 2회씩 측정하였다. 이를 3일에 걸쳐 1일 1회씩 측정한 후 대응표본 t검정을 실시하였다. 그 결과, GM에 있을 때 보다 SSM에 있을 때 심박수(t=8.131, p<.001)와 호흡수(t=7.227, p<.001)가 정상범위 안에서 유의적으로 감소하였다. 이는 SSM의 감각 자극이 신생아의 심리적 안정에 긍정적인 영향을 미쳐 GM보다 빠른 시간 내에 심리적 안정을 주는데 기여한 것으로 볼 수 있다.

• 패션비즈니스
• /
• 제28권1호
• /
• pp.83-97
• /
• 2024

A plantar pressure mat with visual notifications was developed to confirm whether individuals can effectively balance themselves and correct imbalances. The sensor-embedded mat was made with a commercial yoga mat, and was tested on seven working women in their 30s to determine plantar pressure distribution when standing and squatting, and if they could recognize and correct imbalances with visual feedback. The study found that visual notifications significantly changed the plantar pressure ratio of the forefoot and hindfoot, as well as the left and right foot plantar pressure ratio. Without notifications, the center of gravity was more concentrated in the rear foot than the forefoot in both standing and squatting positions. Visual notifications showed that the center of gravity, which was largely focused on the rear foot, was distributed to the forefoot, resulting in a more evenly distributed center of gravity throughout the sole. For the change in left and right plantar pressure, the weight that was largely loaded on the left side was distributed to the right foot through the visual notification mat, confirming a more balanced plantar pressure.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.132.1-132
• /
• 1998

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.128.1-128
• /
• 1998

• Mycobiology
• /
• 제46권1호
• /
• pp.64-71
• /
• 2018

The aim of this study was to investigate the pattern of distribution of mating type (MAT) genes of Tuber indicum in ectomycorhizosphere soils from natural T. indicum-producing areas and cultivated truffle orchards and ascocarp samples from different regions. Quantitative real-time PCR and multiplex PCR were used to weight the copy numbers of MAT1-1-1 and MAT1-2-1 in natural truffle soils and cultivated orchard soils. The effect of limestone on the pattern of truffle MAT genes and the correlation between soil properties and the proportion of MAT genes were also assessed. These results indicated that an uneven and nonrandom distribution of MAT genes was common in truffle-producing areas, cultivated truffle orchards, and ascocarps gleba. The competition between the two mating type genes and the expansion of unbalanced distribution was found to be closely related to truffle fructification. Limestone treatments failed to alter the proportion of the two mating type genes in the soil. The content of available phosphorus in soil was significantly correlated with the value of MAT1-1-1/MAT1-2-1 in cultivated and natural ectomycorhizosphere soils. The application of real-time quantitative PCR can provide reference for monitoring the dynamic changes of mating type genes in soil. This study investigates the distributional pattern of T. indicum MAT genes in the ectomycorhizosphere soil and ascocarp gleba from different regions, which may provide a foundation for the cultivation of T. indicum.

• Safety and Health at Work
• /
• 제9권2호
• /
• pp.140-143
• /
• 2018

Background: The Occupational Safety and Health Monitoring and Assessment Tool (OSH-MAT) is a practical instrument that is currently used in the German woodworking and metalworking industries to monitor safety conditions at workplaces. The 12-item scoring system has three subscales rating technical, organizational, and personnel-related conditions in a company. Each item has a rating value ranging from 1 to 9, with higher values indicating higher standard of safety conditions. Methods: The reliability of this instrument was evaluated in a cross-sectional survey among 128 companies and its validity among 30,514 companies. The inter-rater reliability of the instrument was examined independently and simultaneously by two well-trained safety engineers. Agreement between the double ratings was quantified by the intraclass correlation coefficient and absolute agreement of the rating values. The content validity of the OSH-MAT was evaluated by quantifying the association between OSH-MAT values and 5-year average injury rates by Poisson regression analysis adjusted for the size of the companies and industrial sectors. The construct validity of OSH-MAT was examined by principle component factor analysis. Results: Our analysis indicated good to very good inter-rater reliability (intraclass correlation coefficient = 0.64-0.74) of OSH-MAT values with an absolute agreement of between 72% and 81%. Factor analysis identified three component subscales that met exactly the structure theory of this instrument. The Poisson regression analysis demonstrated a statistically significant exposure-response relationship between OSH-MAT values and the 5-year average injury rates. Conclusion: These analyses indicate that OSH-MAT is a valid and reliable instrument that can be used effectively to monitor safety conditions at workplaces.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2860-2870
• /
• 1994

When crack are detected in aged turbine rotors of power plants, information on fracture resistance of the aged material at operating temperature is needed for determination of critical loading condition and residual life of the turbine. In this study, fracture toughness (J$_lc$) and tearing modulus(T$_mat$) of virgin and thermally degraded 1Cr-1Mo-0.25V steel, which is one of the most widely used rotor steels, were measured at 538.deg. C according to ASTM E813 and ASTM E1152, respectively. Five kinds of specimen with different degradation levels were prepared by isothermal aging heat treatment at $630^{\circ}C.$ It was observed that J$_lc$ and T$_mat$ value decreased as the degradation level increased. Analysis of microstructures using a scanning electron microscope showed that the decrement of J$_lc$ is related to segregation of impurities at grain boundaries. It was also verified that the DC electric potential drop method is accurate and reliable for crack length monitoring at elevated temperature.

• 한국건축시공학회지
• /
• 제4권3호
• /
• pp.109-116
• /
• 2004

Normally easy task of plat in urban architecture is that using underground full of activities for increase building site efficiency. Especially for using underground space for the parking lot. Also utilize underground is more increase for fulfill requirement in modern society considered with environmental friendly architecture. The primary objective of this study is to apply analyzed formal foundation type for selecting the optimum type of parking lots considered with structural stability, economical efficiency, construction efficiency, construction duration. This study aim to on criteria decided through the questionaries for the selection considered with in the scale of second stories parking lots underground, parking volume is 80 and reinforced concrete structure. The bearing capacity is 6～8m and downward from surface, healthy ground bearing capacity is 40 t/m2. This study comparative analysis and discuss economical efficiency, construction efficiency, construction duration based constructivist stability which applied Single foundation, Mat foundation, Drop Mat foundation. The result of this study is as follows: First, the result of economical efficiency is that on the basis of single foundation, Drop Mat foundation is 1.88, Mat foundation 2.04 as a comparative analysis on the basis of total construction cost included material cost, labor coast and machinery cost. Second, the result of construction efficiency order is single foundation, Drop Mat foundation, Mat foundation as a comparative analysis on the based connected characteristics. Third, the result of construction duration is that on the basis of Mat Foundation, Drop Mat foundation is 1.33, single foundation is 1.87 as a comparative analysis Critical Path. Forth, Each foundational type characteristics order through the matrix method is that overall each formal type of foundation contraries at economical efficiency and construction efficiency, construction duration. Also expect contradiction between engineers and owners due to engineer pursuit construction duration and ewer to begin with economical efficiency. Fifth, The selection of suitable foundation formal type needs that based consider project characteristic and field condition as according to above result of a comparative analysis. As a result, a comparative analysis economical efficiency, construction efficiency, construction duration of Mat foundation, Drop Mat foundation, single foundation with 3Bay reinforced structure underground parking lots on the healthy ground.

• Journal of Microbiology and Biotechnology
• /
• 제27권7호
• /
• pp.1223-1232
• /
• 2017

Cordyceps militaris, a member of Ascomycota, a mushroom referred to as caterpillar Dong-chung-ha-cho, is commercially valuable because of its high content of bioactive substances, including cordycepin, and its potential for artificial cultivation. Cordycepin (3'-deoxyadenosine) is highly associated with the pharmacological effects of C. militaris. C. militaris is heterothallic in that two mating-type loci, idiomorph MAT1-1 and MAT1-2, exist discretely in two different spores. In this study, nine C. militaris strains were mated with each other to prepare newly bred strains that produced a larger amount of cordycepin than the parent strains. Nine strains of C. militaris were identified by comparing the internal transcribed spacer sequence, and a total of 12 single spores were isolated from the nine strains of C. militaris. After the MAT idiomorph was confirmed by PCR, 36 mating combinations were performed with six single spores with MAT1-1 and the others with MAT1-2. Eight mating combinations were successfully mated, producing stroma with perithecia. Cordycepin content analysis of all strains by high-performance liquid chromatography revealed that the KASP4-bred strain produced the maximum cordycepin among all strains, regardless of the medium and stroma parts. Finally, universal rice primer-PCR was performed to demonstrate that the bred strains were genetically different from the parental strains and new C. militaris strains. These results may be related to the recombination of genes during mating. The newly produced strains can be used to meet the industrial demand for cordycepin. In addition, breeding through mating suggests the possibility of producing numerous cordycepin-producing C. militaris strains.

• 한국버섯학회지
• /
• 제15권3호
• /
• pp.111-117
• /
• 2017

본 연구는 밀리타리스 동충하초의 교배형 유전자인 MAT1-1과 MAT1-2 두 종류에 특이적인 프라이머를 사용하여 multiplex PCR을 실시하였고, 그 결과 형성된 MAT1-1과 MAT1-2에 대한 233-bp와 191-bp에서 DNA 밴드를 통해 교배형 및 교배여부를 확인하였고 자실체 특성검정을 통해 품종특성이 우수한 새로운 동충하초 '도원홍초 2호'를 개발하였다. 신품종 '도원홍초 2호'의 자실체는 곤봉형이고 밝은 주황색을 띠었으며, 코디세핀 함량은 0.33%였고 자좌의 굵기와 길이는 각각 3.5 mm와 7.1 cm였다. '도원홍초'와 비교할 때, 새로운 '도원홍초 2호'의 수량은 7%가 증수되었고 경도가 높은 특징을 보였다. 균사생장의 적온은 $20{\sim}25^{\circ}C$였고 버섯 발생의 적온은 $18{\sim}22^{\circ}C$였으며, 접종에서부터 자실체 발생까지의 기간은 49.7일이 소요되었다. 신품종 '도원홍초2호'는 교배형 분자마커를 육종과정에 이용하여 효율성을 높였으며, 우수한 재배적 특성으로 동충하초 인공재배 및 산업적 생산에 기여할 것으로 판단된다.