• 한국지반신소재학회논문집
• /
• 제17권4호
• /
• pp.293-304
• /
• 2018

본 연구에서는 하수관 손상 등과 같은 원인에 의해 발생한 공동을 개착식으로 복구하기 위하여 개발된 복구재료를 이용하여 평판재하시험 기반의 현장실험을 실시하였다. 또한 실험결과를 이용하여 복구재료에 대한 지지력을 비교하였으며, 하중지지특성을 분석하였다. 시험 결과, 팽창매트를 지표로부터 각각 0.1m, 0.2m 하부에 매설한 경우에 원지반의 최대 응력조건에서의 지지효과는 약 66%~70% 정도인 것으로 분석되었지만, 매설깊이에 따른 지지효과의 차이는 크지 않은 것으로 나타났다. 콘크리트매트가 적용된 경우의 지지효과는 원지반에 비하여 약 82%~90%로 나타났으며, 팽창매트로 보강된 경우에 비해서도 약 50% 정도의 지지효과를 보였다. 그리고 복구재료에 따른 허용지지력을 분석한 결과, 팽창매트와 콘크리트매트가 매설된 경우의 허용지지력은 원지반 대비 각각 약 130%~150%와 약 160% 이상을 확보하는 것으로 분석되었다.

• 식물분류학회지
• /
• 제45권3호
• /
• pp.243-253
• /
• 2015

붓꽃속(Genus Iris)의 금붓꽃계열(Series Chinensis)은 극동아시아에 국한되어 분포하고 있으며 한국에는 총 6분류군이 자생하고 있다. 이는 크게 두 개의 주요 그룹 (각시붓꽃 complex와 금붓꽃 complex)으로 나뉜다. 본 연구에서는 팔공산에서 발견된 잡종추정개체들의 실체와 붓꽃속 금붓꽃계열 분류군간의 계통학적 유연관계를 규명하기 위해 핵 rDNA ITS와 엽록체 matK 유전자의 염기서열을 확보하여 분석하였다. 총 55개체로부터 얻은 106 개 ITS amplicon의 염기서열 및 군외군의 염기서열을 분석한 결과, 금붓꽃계열의 노랑무늬붓꽃, 노랑붓꽃, 금붓꽃 및 잡종추정군은 군외군과 구분되어 유집되었으나, 군내군 사이에서는 높은 다형성 염기서열이 관측되었다. ITS 계통수에서 잡종추정군의 일부는 노랑무늬붓꽃과 하나의 분계조를 나타내었고, 나머지 잡종추정군의 경우는 금붓꽃+노랑붓꽃과 분계조를 형성하였다. 한편 cpDNA의 경우 matK를 제외한 나머지 마커는 금붓꽃과 노랑붓꽃의 차이를 보여주지 못하였다. matK의 NJ 계통수에서 잡종추정군이 금붓꽃과 높은 Bootstrap 값으로 하나의 분계조를 형성하였으며, 염기서열이 일치하였다. 이 결과를 바탕으로 팔공산에서 발견된 잡종추정군의 모계는 금붓꽃이고 부계는 노랑무늬붓꽃이라는 가능성을 제시하였다.

• 한국식품조리과학회지
• /
• 제8권2호
• /
• pp.117-122
• /
• 1992

Tom coagulated with $CaCl_2$ was used to make high-Ca soy milk, named tofu milk. Physicochemical analysis of regular soy milk and tofu milk adjusted at various pH and/or heat-treated was carried out. Unheated and heat treated tofu milk kept stable conoldal state at pH 8. The solubility of soy milk was low at pH 4 but increased gradually at higher pH, while mat of tofu milk was almost unchanged between pH 4 and pH 7 but increased rapid1y above pH 8. At pH 8, the viscosity of tofu milk was almost the same as soy milk, while mat of heat-heated tofu milk was much higher man that of soy milk. Especially, steamed tofu milk seemed to be a thick paste unable to drink, but autoclaved tofu milk was suitable to drink. Phytic acid content of tofu milk was somewhat lower man mat of soy milk.

• Journal of Ceramic Processing Research
• /
• 제19권5호
• /
• pp.388-393
• /
• 2018

Sublimation of $Bi_2O_3$-based materials is an important degradation issue for the long-term applications of many electronic devices. A series of $SnO_2$-doped $Bi_2O_3$ materials (SBO), was synthesized, densified, and then tested in air or strong reducing atmosphere. The $SnO_2$-doping effects and sublimation kinetics of the SBO materials were studied by X-ray diffraction (XRD), scanning electron microscope (SEM) and precise mass loss measurement. The results show that formation of $Bi_2Sn_2O_7$ phase greatly retards the mass loss of SBO. The SBO samples show a surface sublimation in an energy of $52.6kJ{\cdot}mol^{-1}$. However, the sublimation is also controlled by surface microstructure as the amount of vaporizing species (the Bi or gaseous Bi-oxides) is more than 0.1 mass%. The evaporation is retarded on the rough surface and the mechanism of surface evaporation is changed to diffusional control.

• 한국작물학회지
• /
• 제51권spc1호
• /
• pp.229-232
• /
• 2006

This study was conducted to select the most suitable dye bath soil of mat rush for good quality. Dry stem weight ranged from 102.5 to 107.0 g, dry stem ratio ranged from 34 to 36%, color of stem ranged from soft gray to heavy gray, degree of softness ranged from high to low and degree of floating ranged from extremely high to low. All the good quality components, such as dry stem weight, dry stem ratio, color of stem, degree of softness and degree of floating showed large variations. Hadong white ceramic soil, the superior dye bath soil of mat rush, showed relatively superior values for all the good quality components with 102.5 g in light dry stem weight, 34% in high dry stem ratio, good color of soft gray in color stem, high in degree of softness and extremely high id degree of floating. The results indicate that dye bath soils shows different adaptabilities to a particular dye bath and Hadong white ceramic soil seems to be the most suitable dye bath soil of mat rush for good quality.

• 한국표면공학회지
• /
• 제31권1호
• /
• pp.54-62
• /
• 1998

In this study, the behaviorof ion nitriding of AISI 304 stainless steel was investigated using plasma ion nitriding system. The characteristics of ion nitriding, and their micsoctrucyures, and physical properties were investigated as a function of process parmeteds. important conclusions can be summarzied as follows. Firstly, it was found that growth of nitride layer in ion nitriding are mainly affected by N2 partial pressures and nitriding temperatures for AISI 304 stainless steel. The $N_2$<\TEX> partial pressure plays on important role in ion nitriding since it determiness the incoming flux of nitrogen species onto specimen surface. Nitriding thmprrature is also important besauseit determines the diffusion rates of nitrogen through nitride layers. While both parameters affects the characteristics rateding are controlled by nitridingen diffusion nitration profiles of N and alloying elements such as Cr and Ni are observed through niride layers. Secondly, nitride layer consists of the upper white laywe having various nitride phases and the underneath diffusion layers. The thickness of white layer increases with $N_2$<\TEX> partial pressures and nitriding temperatures. The thinkness of diffusion layer is increasting nitriding temperatures. Finally, nitriding of stainless steels steel show slighly low their corrsionce prorerties. However, passivation properties, which is normally observed in stainless steels, were still observed aftre ion nitriding.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.171.2-171.2
• /
• 2016

The 2-dimensiona electron gas (2DEG) layers have opened tremendous interests in the heterooxide interfaces formed between two insulating materials, especially between LaAlO3 and $SrTiO_3$. The 2DEG layers exhibit extremely high mobility and carrier concentrations along with metallic transport phenomena unlike the constituent oxide materials, i.e., $LaAlO_3$ and $SrTiO_3$. The current work inserted artificially the interfacial layer, $Sr_xCa_{1-x}TiO_3$ between $LaAlO_3$ and $SrTiO_3$, with the aim to controlling the 2-dimensional transports. The insertion of the additional materials affect significantly their corresponding electrical transports. Such features have been probed using DC and AC-based characterizations. In particular, impedance spectroscopy was employed as an AC-based characterization tool. Frequency-dependent impedance spectroscopy have been widely applied to a number of electroceramic materials, such as varistors, MLCCs, solid electrolytes, etc. Impedance spectroscopy provides powerful information on the materials system: i) the simultaneous measurement of conductivity and dielectric constants, ii) systematic identification of electrical origins among bulk-, grain boundary-, and electrode-based responses, and iii) the numerical estimation on the uniformity of the electrical origins. Impedance spectroscopy was applied to the $LaAlO_3/Sr_xCa_{1-x}TiO_3/SrTiO_3$ system, in order to understand the 2-dimensional transports in terms of the interfacial design concepts. The 2-dimensional conduction behavior system is analyzed with special emphasis on the underlying mechanisms. Such approach is discussed towards rational optimization of the 2-dimensional nanoelectronic devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.188.2-188.2
• /
• 2015

The presence of the conduction interface in epitaxial $LaAlO_3/SrTiO_3$ thin films has opened up challenging applications which can be expanded to next-generation nano-electronics. The metallic conduction path is associated with two adjacent insulating materials. Such device structure is applicable to frequency-dependent impedance spectroscopy. Impedance spectroscopy allows for simultaneous measurement of resistivity and dielectric constants, systematic identification of the underlying electrical origins, and the estimation of the electrical homogeneity in the corresponding electrical origins. Such unique capability is combined with the intentional control on the interface composition composed of $SrTiO_3$ and $CaTiO_3$, which can be denoted by $SrxCa1-_xTiO_3$. The underlying $Sr_xCa1-_xTiO_3$ interface was deposited using pulsed-laser deposition, followed by the epitaxial $LaAlO_3$ thin films. The platinum electrodes were constructed using metal shadow masks, in order to accommodate 2-point electrode configuration. Impedance spectroscopy was performed as the function of the relative ratio of Sr to Ca. The respective impedance spectra were analyzed in terms of the equivalent circuit models. Furthermore, the impedance spectra were monitored as a function of temperature. The ac-based characterization in the 2-dimensional conduction path supplements the dc-based electrical analysis. The artificial manipulation of the interface composition will be discussed towards the electrical application of 2-dimensional materials to the semiconductor devices in replacement for the current Si-based devices.

• 한국응용과학기술학회지
• /
• 제35권3호
• /
• pp.905-913
• /
• 2018

본 연구는 필라테스 동작 시 폼롤러의 적용과 움직임에 따른 몸통과 하지의 근활성도 차이를 알아보는 것이 목적이다. 피험자로 남자 8명을 선정하여 필라테스 네발자세, 교각자세, 코어컨트롤 동작을 매트위에서 정적동작, 폼롤러 위에서 정적동작, 폼롤러 위에서 동적동작으로 무선배정하여 1주 간격으로 수행하였다. 각 동작의 수행 시 척추세움근, 배곧은근, 배바깥빗근, 중간볼기근, 넙다리두갈래근과 넙다리곧은근의 근활성도를 측정하여 일원분산분석으로 분석하였다. 유의수준은 ${\alpha}=.05$로 설정하였다. 첫째, 네발기기 동작에서 폼롤러 동적동작에서는 배곧은근, 배바깥빗근, 중간볼기근, 넙다리두갈래근의 근활성도가 높게 나타났으며(p<.001)(p<.05), 폼롤러 정적동작에서는 넙다리곧은근의 근활성도가 높게 나타났다(p<.001). 둘째, 교각자세 동작에서 폼롤러 동적동작에서는 넙다리두갈래근의 근활성도가 높게 나타났다(p<.001). 셋째, 코어컨트롤 동작에서 폼롤러 동적 동작에서는 배곧은근, 척추세움근, 중간볼기근의 근활성도가 높게 나타났으며(p<.001)(p<.01), 정적 동작에서는 배바깥빗근의 근활성도가 높게 나타났다(p<.05). 필라테스 운동시 근활성도를 고려하여 방법과 난이도를 적용하면 더욱더 효과적일 것이라 사료된다.

• 한국지반신소재학회논문집
• /
• 제5권1호
• /
• pp.25-32
• /
• 2006

방조제 공사는 바다를 막아 바닷물의 흐름을 차단해가는 과정으로 육상공사와는 달리 수심이 깊고 파랑이 심한 바다에서 이루어지는 공사이기 때문에 축조재료의 유실이 많고 심할 경우 방조제가 붕괴되는 위험이 큰 공사이다. 특히, 방조제의 끝막이 단면은 대규모 사석과 돌망태 등을 이용하여 시공하므로, 구성 재료가 불규칙하고 간극이 크기 때문에 일반적인 지반내의 침투흐름보다 상당히 빠른 침투가 발생된다. 본 연구에서는 방조제 끝막이 후 축조된 사석단면과 후속공정을 통하여 축조되는 방조제단면에 대한 실내 침투모형시험을 수행하여 침투거동을 예측 및 분석하였다. 다양한 조위변화를 재현하여 근고공 필터매트 시공에 따른 사석단면내의 유속변화, 침윤선 분포 등을 계측하여 침투거동을 분석하였다. 실내 침투모형시험 결과, 끝막이 사석단면의 침투유속은 최대 1.7m/sec 발생하였으며, 근고공 필터매트 시공에 따라 최대 침투유속이 23.7% 감소하였다.