• 대한전자공학회논문지SD
• /
• 제41권4호
• /
• pp.67-74
• /
• 2004

기존의 버스트 모드 자동전력제어 회로는 데이터 율이 증가함에 따라 마크밀도 변화 영향을 심하게 받아 에러를 야기하였다. 이 문제를 해결하기 위해 높은 데이터 율에서도 마크밀도의 영향을 배제시킬 수 있는 새로운 구조의 첨두 비교기를 고안하고 이를 자동전력제어 회로에 적용하여 마크밀도 변화에 강한 버스트 모드 자동전력제어 회로를 제안하였다. 제안한 자동전력제어 회로 내의 첨두 비교기는 높은 데이터 율에서 뿐만 아니라 광범위한 기준전류 및 차 전류 변화에서도 미소한 마크밀도 변화 영향만을 보여 마크밀도 변화에 매우 강한 특성을 확인 할 수 있었다.

• 한국주조공학회지
• /
• 제23권5호
• /
• pp.257-267
• /
• 2003

In early solidification during the continuous casting of steel slabs, the formation of oscillation marks on the surface of slabs was mainly affected by carbon contents and casting conditions. The control of oscillation mark is required for the HCR(Hot Charged Rolling) process because the deep oscillation marks seriously deteriorate the surface qualities of steel slabs. The metallographic study has revealed that the oscillation mark can be classified principally according to the presence or absence of a small 'subsurface hook' and the depth of the oscillation marks in the subsurface structure at the basis of individual oscillation marks. The subsurface hook of oscillation marks was either straight or curved. When the amount of overflow was small and the subsurface hook was formed in the top of oscillation marks, the subsurface hook was straight and the oscillation mark was shallow. The oscillation marks without subsurface hook have small early solidification shell and were formed wide. The actual negative strip time$(t_N)$ was changed by the effect of meniscus level fluctuation Therefore irregular early solidification shell and oscillation mark were formed.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제9권1호
• /
• pp.103-107
• /
• 2006

Belsey Mark IV 위바닥주름술은 이전의 역류 방지 수술이 실패하여 재수술을 해야 하는 경우 혹은 식도 열공 탈장이 오래 되어 유착이 있는 경우에 적응증이 된다. 본 증례는 식도 열공 탈장과 GERD로 진단되어 Nissen 위바닥 주름술을 시행하였으나 실패하였고 재수술을 시도하였지만 수술 부위의 유착이 심하여 수술적 접근이 불가능하였다. 저자들은 흉강을 통하여 Belsey Mark IV 위바닥주름술을 실시하였고, 수술 후 증상과 영양상태의 호전을 보인 1예를 문헌 고찰과 함께 보고하는 바이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.293-296
• /
• 2016

복잡한 도심의 도로 상황에서 긴급 상황 발생 시 이동하는 특수목적 차량(경찰, 소방, 구급 등)에 대한 신속한 양보가 필요하다. 이러한 긴급 차량의 이동 상황을 도로 인프라가 인지해 교통 신호 제어기 및 일반 차량들에 WAVE나 TPEG 등 무선 네트워크를 통해 먼 곳까지 메시지를 전달한다면 일반 차량들이 길을 양보하기 위한 사전 준비 작업이 가능해져 특수목적 차량들이 훨씬 더 신속하게 이동할 수 있게 된다. 본 논문에서는 마크 인식 알고리즘을 통해 특수차량의 지붕에 설치한 루프 마크를 활용하여 마크의 투영 변환 및 정보 디코딩으로 마크를 검출하고 내부의 정보를 획득한다. 실험 결과 마크의 크기가 $88cm{\times}88cm$ 이상일 때 50Km/h의 속도에서 100% 인식이 되고 마크 내부의 디지털 데이터도 93.3% 인식 가능함을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.175-176
• /
• 2012

• 대한수학회논문집
• /
• 제31권4호
• /
• pp.811-817
• /
• 2016

Using the periodic continued fraction, we give concrete examples of the points at which the derivatives of the Minkowski question mark function does not exist. We also give examples of the differentiability points which show that recent apparently independent results are consistent and closely related.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.217-220
• /
• 2007

The quality of product depends on a lots of injection molding conditions at each operation stage and mainly was effected by pressure and temperature. The objective of this study was to investigate the relationship between the product quality and the distribution of pressure in a cavity with operation condition change. Specimen having some ribs was designed and the mold was prepared and temperature and pressure sensors were installed in the mold. PP was used and pressure distribution was measured with operation condition change. The relationship between the sink mark and the pressure in a cavity was investigated by measurement of the level of sink mark. The level of sink mark was decreased at the cross of plane and rib by increasing of pressure in a cavity, so the pressure should be controlled properly in order to get the required quality.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.811-814
• /
• 1997

The injection molding process has been developed as a very important technology for the automotive and electric industries in recent years. But, in the injection molding products with rib-web structures, partial deformation by thermal volumetric shrinkage called Sink Mark, is occurred. In this study, to make explicitly characteristics of sink mechanism, an experimental approach was taken by using multi T-shaped mold cavity and FEM simulation. As a result, pressure on the packing process and the rib thickness are the most effective on sink mark depth. On the other hand, melt temperature has no effect on sink mark depth fot the same rib thickness.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.378-382
• /
• 2004

A study was performed for verification of creation mechanism of turn down mark in thick plate. The roll mark was produced by plate bending when the front of plate was collided with roller table rolls. Various process conditions which are temperatur distribution along the thickness direction of plate, pass line, and reduction ration were investicated. These process conditions affected the amount of plate bending and were a major cause of turn down mark.

• 한국환경교육학회지:환경교육
• /
• 제11권1호
• /
• pp.165-180
• /
• 1998

The purpose of this study is to investigate how much people recognise and participate in wastes recycling and to give suggestions for systematic environmental education on the recycling. Subject's recognition degree on recycling mark which had been established by The Ministry of Environment in 1995 was very low and the recycling mark should be educated because it would help people consider the environmental factor when purchase goods which are recyclable or not. They acknowledged simple recycling methods of recyclable goods much but not the complex methods of them. So they need the systematic education on recycling method through which continuous participation of them would be arisen. In the while there is no mention about recycling mark in textbooks which are currently used in Korean elementary schools, middle schools and high schools. Not only the mark but also any kind of environmental information should be updated in environmental textbooks/learning materials to cultivate students environmental literacy to meet current environmental issues dynamically and solve environmental problems in the future successfully.