• 제목/요약/키워드: MAG algorithm

검색결과 19건 처리시간 0.019초

최소 가산 그래프 알고리즘에 의한 힐버트 변환기 설계에 관한 연구 (Using MAG Algorithm for Reducing Hardware in Hilbert Transformer Design)

  • 이영석
    • 한국정보전자통신기술학회논문지
    • /
    • 제2권4호
    • /
    • pp.45-51
    • /
    • 2009
  • DSP 시스템에서 널리 사용되는 힐버트 변환에서 곱셈 연산은 반드시 필요한 요소이며 변환에 사용되는 계수의 차수가 높아질수록 하드웨어는 복잡하고 많은 양의 게이트를 필요로 한다. 본 연구에서는 힐버트 변환에 사용되는 곱셈연산에 MAG 알고리즘이 적용된 쉬프트와 덧셈을 사용한 곱셈블록을 구현하여 하드웨어의 복잡도를 줄일 수 있다.

  • PDF

PMIPv6 망에서 NEMO 지원을 위한 MR 연동 알고리즘의 설계 및 구현 (Algorithm Design and Implementation of Interworking with MR for NEMO in PMIPv6 Network)

  • 민상원
    • 한국통신학회논문지
    • /
    • 제34권6B호
    • /
    • pp.615-622
    • /
    • 2009
  • 본 논문에서는 PMIPv6(Proxy Mobile IPv6)망에서 네트워크 이동성을 지원하기 위하여 NEMO(NEtwor Mobility)가 PMIPv6 망에 접속하면 MR(Mobile Router)이 보내오는 BU(Binding Update)를 통하여 MAG(Mobile Access Gateway)가 이를 인지하고 MR과 터널을 형성할 수 있도록 알고리즘과 기존의 BCE(Binding Cache Entry)에 추가되는 데이터 필드를 제안하였다. 이를 이용하여 MR에 속해 있는 단말이 전송하는 패킷도 폐기 되지 않게 하였으며, 제안한 방식은 기존의 NEMO를 그대로 PMIPv6에 적용이 가능한 장점이 있다. 제안한 알고리즘을 통하여 PMIPv6 망에서도 네트워크 이동성을 지원할 수 있도록 하였으며, 알고리즘의 증명을 위해 실제 구현을 통하여 기존의 방식의 경우와 알고리즘의 적용과 데이터 필드의 추가로 실제 통신이 가능하다는 것을 증명하였다.

PMIPv6 망에서 MIPv6 호스트의 효율적인 연동 방안에 관한 연구 (A Novel Scheme for Efficient Interworking with MIPv6 Hosts in the PMIPv6 Network)

  • 박종원;민상원;김복기
    • 한국통신학회논문지
    • /
    • 제35권3B호
    • /
    • pp.373-379
    • /
    • 2010
  • 본 논문에서는 기존의 MIPv6 호스트가 PMIPv6 망에 연결을 설정하게 될 경우 발생하는 문제점에 대해 기술하고 PMIPv6 망에서 MIPv6 호스트를 지원하기 위한 방안을 제안하였다. 제안한 방안은 LMA에 등록하였던 BU과정을 MAG에서 판단하여 MAG에 BCE를 등록하게 하고 PMIPv6 서비스를 이용할 수 있도록 한 MAS 알고리즘이며, MAS 알고리즘에 PMIPv6 서비스 사용 여부를 판단하기 위하여 기존의 RS와 RA에 1비트의 N-플래그를 추가하여 Modified RS와 RA 메시지를 제안하였다. 제안한 알고리즘은 시뮬레이션을 통하여 기존의 방식으로 연결을 설정하였을 경우의 성능과 MAS 알고리즘을 적용하여 MIPv6 호스트와 연결을 설정하였을 경우의 성능을 비교함으로써 평가하였다.

MAG 알고리즘을 이용한 힐버트 변환기의 설계에 관한 연구 (A Study on the design of Hilbert transformer using the MAG Algorithm)

  • 이영석
    • 한국정보전자통신기술학회논문지
    • /
    • 제7권3호
    • /
    • pp.121-125
    • /
    • 2014
  • DSP 시스템에서 널리 사용되는 힐버트 변환에서 곱셈 연산은 반드시 필요한 요소이며 변환에 사용되는 계수의 차수가 높아질수록 하드웨어는 복잡하고 많은 양의 게이트를 필요로 한다. 본 연구에서는 힐버트 변환에 사용되는 곱셈연산에 MAG 알고리즘이 적용된 쉬프트와 덧셈을 사용한 곱셈블록을 구현하여 하드웨어의 복잡도를 줄일 수 있다.

MAG 알고리즘에 의한 힐버트 변환기의 하드웨어 복잡도 감소에 관한 연구 (A Study on the Hardware Complexity Reduction of Hilbert transformer by MAG algorithm)

  • 김영웅;이영석
    • 한국산학기술학회논문지
    • /
    • 제12권1호
    • /
    • pp.364-370
    • /
    • 2011
  • 힐버트 변환은 무선 디지털 통신으로부터 수신된 대역통과 신호를 저역통과 신호로 변환시켜 사용자에게 필요한 정보를 제공할 수 있는 역할을 수행한다. 힐버트 변환의 기본 연산과정은 승산과 가산 연산으로 구성되어 있으며, 힐버트 변환을 하드웨어로 구현한 힐버트 변환기는 승산기 설계에서 많은 양의 게이트들을 이용한 설계가 요구되고, 이에 따라 구현된 힐버트 변환기는 높은 소비전력과 넓은 면적을 차지하여 모바일 디지털 기기의 전체적인 성능에 영향을 미친다. 본 논문에서는 MAG(Minimum Adder Graph) 알고리즘을 이용하여 승산 연산의 복잡도를 감소시켜 디지털 통신기기 특히 모바일 시스템의 구성요소인 힐버트 변환기를 기존의 방법보다 더 적은 게이트를 이용하여 구현할 수 있는 방법을 제안하였다. 제안된 방법은 Xilinx사의 ISE환경에서 모의 실험하여 성능의 우수함을 보여주었다.

k-anonymity와 ℓ-diversity를 이용한 동적 데이터 보호 기법 설계 (A Design of DDPT(Dynamic Data Protection Technique) using k-anonymity and ℓ-diversity)

  • 정은희;이병관
    • 한국정보전자통신기술학회논문지
    • /
    • 제4권3호
    • /
    • pp.217-224
    • /
    • 2011
  • 본 논문에서는 동적 데이터베이스 환경에서 발생할 수 있는 개인 정보 노출 문제를 해결할 수 있는 동적 데이터 보호 기법(Dynamic Data Protection Technique)을 제안하였다. 본 논문에서 제안한 DDPT은 다중 속성 일반화 알고리즘을 이용해 MAG(Multi-Attribute Generalization) 규칙을 생성하고, 그 MAG 규칙에 따라 k-anonymity를 만족하는 EC(Equivalence Class)를 생성한다. 그리고 데이터 변경 시 MAG 규칙에 따라 EC를 재구성 하도록 하여, EC의 변경으로 인한 식별 노출을 방지할 수 있다. 또한, ${\ell}$-diversity를 만족하는 EC의 정보손실 정도를 측정하고, 임계치 이하의 EC를 선정해서 데이터의 정확성을 유지함으로써 개인 정보 보호를 향상시켰다.

Pulse MAG 용접용 전원의 출력파형 제어 (Welding Current Waveform Control of Power Source for Pulse MAG)

  • 구헌회;변영복;조상명;이현우;심우용
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 F
    • /
    • pp.2118-2120
    • /
    • 1998
  • Recently the automatization and the robotization of the arc welding industry is promoted and also the improvement of the welding quality and the work efficiency is required strongly. In this paper, special welding current waveform control algorithm is developed for less spatter and improvement of welding performance in the high speed and low arc voltage range. And the output control and the short circuit waveform control to the varition of the welding is studied by appling the algorithm to the power source for pulse arc welding.

  • PDF

CCD PHOTOMETRY USING MULTIPLE COMPARISON STARS

  • Kim, Yong-gi;Andronov, Ivan L.;Jeon, Young-Beom
    • Journal of Astronomy and Space Sciences
    • /
    • 제21권3호
    • /
    • pp.191-200
    • /
    • 2004
  • The accuracy of CCD observations obtained at the Korean 1.8m telescope has been studied. Seventeen comparison stars in the vicinity of the cataclysmic variable BG CMi have been measured. The 'artificial' star has been used instead of the 'control' star, what made possible to increase accuracy estimates by a factor of 1.3-2.1 times for 'good' and 'cloudy' nights, respectively. The algorithm of iterative determination of accuracy and weights of few comparison stars contributing to the artificial star, has been presented. The accuracy estimates for 13-mag stars are around $0.^m002$ mag for exposure times of 30 sec.

Searching for Dwarf Galaxies in NGC 1291 obtained with KMTNet

  • Byun, Woowon;Kim, Minjin;Sheen, Yun-Kyeong;Park, Hong Soo;Ho, Luis C.;Lee, Joon Hyeop;Jeong, Hyunjin;Kim, Sang Chul;Park, Byeong-Gon;Seon, Kwang-Il;Ko, Jongwan
    • 천문학회보
    • /
    • 제43권2호
    • /
    • pp.53.2-53.2
    • /
    • 2018
  • We present newly discovered dwarf galaxy candidates in deep and wide-field images of NGC 1291 obtained with KMTNet. Through a visual inspection, we find ~ 13 candidates, for which central surface brightness ranges from ${\mu}_{0,R}{\sim}22.5$ to $26.5mag\;arcsec^{-1}$. Adopting the distance to NGC 1291, the candidate dwarfs are brighter than $M_R=-12.5mag$ and their effective radii range from 350 pc to 1.4 kpc. Structural and photometric properties of dwarf candidates near NGC 1291 appears to be consistent with those of ordinary dwarf galaxies in nearby galaxies. We conduct the imaging simulation in order to find an optimal way to detect dwarf galaxies in KMTNet images and to test the completeness of our detection algorithm. We plan to apply this method to deep KMTNet images of other nearby galaxies obtained through KMTNet Nearby Galaxy Survey (KNGS).

  • PDF

Data Interpolation and Design Optimisation of Brushless DC Motor Using Generalized Regression Neural Network

  • Umadevi, N.;Balaji, M.;Kamaraj, V.;Padmanaban, L. Ananda
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권1호
    • /
    • pp.188-194
    • /
    • 2015
  • This paper proposes a generalized regression neural network (GRNN) based algorithm for data interpolation and design optimization of brushless dc (BLDC) motor. The procedure makes use of magnet length, stator slot opening and air gap length as design variables. Cogging torque and average torque are treated as performance indices. The optimal design necessitates mitigating the cogging torque and maximizing the average torque by varying design variables. The data set for interpolation and ensuing design optimisation using GRNN is obtained by modeling a standard BLDC motor using finite element analysis (FEA) tool MagNet 7.1.1. The performance indices of the standard motor obtained using FEA are validated with an experimental model and an analytical method. The optimal design is authenticated using particle swarm optimization (PSO) algorithm and the performance indices of the optimal design obtained using GRNN is validated using FEA. The results indicate the suitability of GRNN as an interpolation and design optimization tool for a BLDC motor.