Search | Korea Science

Jang, T.W.;Cho, S.H.;Park, C.G.;Lee, J.W.;Woo, W.C.
- International Journal of Korean Welding Society
- /
- v.3 no.1
- /
- pp.34-38
- /
- 2003
It has been used many kinds of horizontal butt-welding methods at block-to-block erection stage in shipbuilding companies. For examples, some companies use conventional FCAW process with one side or both sides groove joint welding, others use carriage with torch holder type mechanized welding method. Although lots of efforts were done until now, some problems in quality and productivity still remain in ship's hull welding. In this study, we have attempted to raise productivity and quality on horizontal position of welding with following 3 items. 1) Prepare groove condition with no root gap for making easy fit-up work. 2) Develop improved MAG (100% $CO_2$ gas shielding) welding process with solid wire for making sound root bead from one side. 3) Develop and apply quite new automatic welding carriage. The stability of new welding process was confirmed by conducting mechanical tests of weldments to verify the soundness of weldments.
PDF

Woo, Wan-Chuck;Jang, Tae-Won;Lee, Jae-Won
- Proceedings of the KWS Conference
- /
- 2002.10a
- /
- pp.425-429
- /
- 2002
It has been used many kinds of horizontal butt-welding methods at block-to-block erection stage in shipbuilding companies. For examples, some companies use conventional FCA W process with one side or both sides groove joint welding, others use carriage with torch holder type mechanized welding method. Although lots of efforts were done until now, some problems in quality and productivity still remain in ship's hull welding. In this study, we have attempted to raise productivity and quality on horizontal position of welding with following 3 items. 1) Prepare groove condition with no root gap for making easy fit-up work. 2) Develop improved MAG (100% $CO_2$ gas shielding) welding process with solid wire for making sound root bead from one side. 3) Develop and apply quite new automatic welding carriage. The stability of new welding process was confirmed by conducting mechanical tests of weldments to verify the soundness of weldments.
PDF

Choi, K.Y.;Kim, Y.P.;Kim, K.J.;Kim, D.S.;Bae, S.D.
- Special Issue of the Society of Naval Architects of Korea
- /
- 2006.09a
- /
- pp.128-133
- /
- 2006
Generally, porosity which was formed by pyrolysis of the primer is usually generated in the weld metal in respect of increase of the welding speed. in order to analyze the cause of porosity generation, this study was performed using FCAW(flux cored arc welding) process for three kinds of inorganic.zinc primer. in addition the evaluation by influence of welding method on porosity generation is conducted to compare between FCAW and MAG(metal active gas) welding with the same inorganic zinc primer. As the result of this investigation, not only primer of lower organic binder and zinc but also FCAW process than MAG in fillet welding have been verified the excellent resistance to the porosity generation for horizontal fillet welding.
PDF

김종철;박경채;최창옥
- Journal of Welding and Joining
- /
- v.19 no.5
- /
- pp.506-511
- /
- 2001
Weld overlay has been developed to improve the property of material surface which is used in the severe environment. Weld overlay is the process which uses an arc heat and welds different composition of alloy on the substrate for the improvements of heat resistance and wear resistance. Weld overlay has a lot of advantages which are high hardness, good processing efficiency, easy controlling of layer thickness, good quality and low cost. In this study, weld overlay was performed by MAG welding on the base metal(SS400) with filler metal which contain composite powders(Cr+C+Mn+Mo+NbC) and solid wire(JIS-YGW11). Characterization of hardness and wear resistance were analyzed by EDS, EPMA, XRD and observations of microstructure were performed to investigate characteristics of overlays. The experimental results of overlaid specimens manufactured with Cr+C+Mn+Mo+NbC powders were obtained as fellows. ${\alpha}-phase$, M(Fe, Cr)3C and NbC of overlays were increased with decreasing the wire feed rates and increasing powder feed rates. Also the hardness of overlays were increased and the specific wear were decreased.
PDF

Kim, T.J.;Kim, E.S.;Byun, Y.B.;Goo, H.H.;Kim, S.H.;Cho, S.M.;Lee, H.S.
- Proceedings of the KIEE Conference
- /
- 1999.07f
- /
- pp.2502-2504
- /
- 1999
In $CO_2$ arc welding, which is generally used for steel Panel of chassis parts, spatters cause many troubles. This paper represents the Pulse MAG arc welding to limit spatter generation, which is controlled output current instantaneously. And the system designed in this Paper is the digital controller using DSP.
PDF