• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 한국컴퓨터종합학술대회 논문집 Vol.33 No.1 (D)
• /
• pp.115-117
• /
• 2006

IEEE 802.11 표준은 채널 상태에 따라 다양한 전송 속도를 지원하며, 무선랜 환경에서 이러한 특성을 활용하는 연구들이 진행되어 왔다. 그러나, 모바일 애드 혹 네트워크 환경에서 다중전송속도를 활용하는 연구는 거의 이루어지지 않았다. 본 논문은 모바일 애드 혹 네트워크에서 동적으로 다중전송속도를 활용하여 채널 효율을 높이는 알고리즘을 제안한다. 제안 기법은 MAC 계층과 네트워크 계층 중간에 위치하며 각 계층에 독립적으로 동작한다. 라우팅 프로토콜에서 결정한 다음 홉에 더불어, 제안 기법은 더 빠른 전송 속도를 갖는 중계 경로를 탐색한다. 또한, 패킷의 크기에 따라 경쟁 부하를 고려하여 선택적으로 전송 경로를 변경한다. 모의 실험을 통한 성능 평가는 제안 기법의 우수한 성능을 입증한다.

• 대한소아치과학회지
• /
• 제26권1호
• /
• pp.53-61
• /
• 1999

Newley developed dentin bonding system which contains self-etching primer performed the removing of smear layer and etching procedure at once. So, it make possible more simple and shorter working time, the stronger bonding strength than conventional dentin bonding system. Cavities were prepared in the buccal and lingual surface of 30 extracted primary molars, and randomly assigned into three equal groups of 10 each. All cavities were filled with Z-100 composite resin following manufacturer's specifications after priming of three different dentin bonding system. Specimens stored for 7 days in 37 degree C water, thermocycled for 1000 cycles between 5 degree C and 55 degree C, immersed in 50% silvernitrate solution for 24 hours, and embedded in resin before being sectioned longitudinally. Data were analyzed by t-test and ANOVA. Mac-Bond II and Clearfil Linear-Bond II showed less microleakage at the occlusal and gingival margins compared to Scotchbond Multi Purpose. All dentin bonding systems showed significantly less microleakage at the occlusal margins compared to the gingival margins. But, there were no significantley difference between each group.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.339-342
• /
• 2005

In order to support ultrawide-band signal generation for low rate WPAN, several types of signal generation mechanisms are suggested such as Chaos, Impluse, and Chirp signals by the activity of IEEE 802.15.4a. The communication system applied chaos theory may have ultrawide-band characteristics with spread spectrum and immunity from multipath effect. In order to use the advantage of chaotic signal generation, we introduce the system implementation of communication and networking systems with the chaos UWB signal. This system may be composed of mainly three parts in hardware architecture : RF transmission with chaotic signal generation, signal receiver using amplifiers and filters, and 8051 & FPGA unit. The most difficult part is to implement the chaotic signal generator and build transceiver with it. The implementation of the system is devidced into two parts i.e. RF blocks and digital blocks with amplifiers, filters, ADC, 8051 processor, and FPGA. In this paper, we introduce the system block diagram for chaotic communications. Mainly the RF block is important for the system to have good performance based on the chaotic signal generator. And the main control board functions for controlling RF blocks, processing Tx and Rx data, and networking in MAC layer.

• Journal of information and communication convergence engineering
• /
• 제12권1호
• /
• pp.19-25
• /
• 2014

The wireless sensor networking standard DASH7 operates in low-power communication with a better transmission quality in active RFID networks. The DASH7 security standard supports public key cryptography. At present, the DASH7 standard uses the message authentication code in the network layer for authentication and integrity. However, its security standard is still in an incubation stage with respect to the implementation of a crypto exchange over a DASH7 network. Effective key management is an important factor for privacy and security. If organizations are not careful about where and how keys are stored, they leave the encrypted data vulnerable to theft. In this regard, we present a key management system designed for efficient key management through public key infrastructure authentication as well as a non-repudiation feature for the DASH7 standard. We analyze the performance of the proposed system on a basis of various performance criteria such as latency and throughput.

• 한국통신학회논문지
• /
• 제17권4호
• /
• pp.336-345
• /
• 1992

본 논문에서는 상호 접속된 토큰링 근거리 통신망 환경하에서의 단말간 전송 효율 및 지연 현상에 대한 성능 평가를 행하였다. 상호 접속된 시스템은 단일 및 자중 체인 폐쇄 큐잉 망으로 모델링 하였다. 성능 평가를 위해 평균 값 해석 기법에 기초를 둔 반복 해법 알고리즘을 제안하였다. 단말간 전송 모델의 성능을 평가한 결과 브릿지로 상호 접속한 근거리 통신망 환경하에서 윈도우 크기, 상호 접속 링크 용량, 각 큐의 서비스 시간 등을 망의 구성에 따라 적절히 유지하여야 최적의 전송 효율과 지연을 얻을 수 있음이 발견되었다.

• 한국전자통신학회논문지
• /
• 제9권12호
• /
• pp.1359-1364
• /
• 2014

IEEE 802.11p는 차량통신 시스템의 대표적인 물리계층 및 매체접근제어계층 표준이다. IEEE 802.11p를 기반으로 한 통신시스템의 일대일 통신성능은 링크접속시간, 오류율, 전송용량 (throughput), 등의 다양한 형태로 측정되었다. 본 논문에서는 IEEE 802.11p기반 통신시스템을 이용하여 대용량으로 신호 전송 시 성능을 측정한다. 일대일 통신을 포함하여 최대 32개의 통신시스템을 사용하여 데이터를 전송하였을 경우에 대한 성능을 측정한다. 전송방식은 브로드캐스트와 유니캐스트 두 가지 경우에 대해 고려하며, 통신시스템의 성능은 수신율 및 전송용량을 이용하여 나타낸다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.248-251
• /
• 1992

In this paper, the RedMAP, i.e. a redundant Mini-MAP system for high reliability is proposed. Redundancy is implemented for LLC, MAC, and Physical layer of ISL-Mini -MAP. The detection of error of the network, the broadcasting of the error event, and the network change sequence are three major functions for the dualized Mini-MAP system. The abnormal operation of the network is mainly detected indirectly with the function of the TBC( token bus controller). The time delay to be required for the change of the networks must be minimized. With the RedMAP, we can achieve successful transmission only with short additional recovery time.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권7호
• /
• pp.3446-3464
• /
• 2017

Backoff mechanism serves as one of the key technologies in the MAC-layer of wireless mobile networks. The traditional Binary Exponential Backoff (BEB) mechanism in IEEE 802.11 Distributed Coordination Function (DCF) and other existing backoff mechanisms poses several performance issues. For instance, the Contention Window (CW) oscillations occur frequently; a low delay QoS guarantee cannot be provided for real-time transmission, and services with different priorities are not differentiated. For these problems, we present a novel Multi-Priority service differentiated and Adaptive Backoff (MPAB) algorithm over IEEE 802.11 DCF for wireless mobile networks in this paper. In this algorithm, the backoff stage is chosen adaptively according to the channel status and traffic priority, and the forwarding and receding transition probability between the adjacent backoff stages for different priority traffic can be controlled and adjusted for demands at any time. We further employ the 2-dimensional Markov chain model to analyze the algorithm, and derive the analytical expressions of the saturation throughput and average medium access delay. Both the accuracy of the expressions and the algorithm performance are verified through simulations. The results show that the performance of the MPAB algorithm can offer a higher throughput and lower delay than the BEB algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제3권2호
• /
• pp.209-218
• /
• 2009

In a wireless sensor network(WSN) each sensor node deals with numerous sensing data elements. For the sake of energy efficiency and network lifetime, sensing data must be handled effectively. A technique used for this is data aggregation. Sending/receiving data involves numerous steps such as MAC layer control packet handshakes and route path setup, and these steps consume energy. Because these steps are involved in all data communication, the total cost increases are related to the counts of data sent/received. Therefore, many studies have proposed sending combined data, which is known as data aggregation. Very effective methods to aggregate sensing data have been suggested, but there is no means of deciding how long the sensor node should wait for aggregation. This is a very important issue, because the wait time affects the total communication cost and data reliability. There are two types of data aggregation; the data counting method and the time waiting method. However, each has weaknesses in terms of the delay. A hybrid method can be adopted to alleviate these problems. But, it cannot provide an optimal point of aggregation. In this paper, we suggest a stochastic-based data aggregation scheme, which provides the cost(in terms of communication and delay) optimal aggregation point. We present numerical analysis and results.

• 한국컴퓨터정보학회논문지
• /
• 제13권4호
• /
• pp.151-159
• /
• 2008

기술의 발전과 유선망에서와 동일한 성능을 요구하는 사용자의 기대치 증대로 인해 광대역 무선 이동망은 중요한 연구 분야로 떠오르고 있다. 본 논문에서는 IEEE 802.16e 기반시스템의 매체 접속제어 계층에서 핸드오버 성능 증가를 위한 기법을 제안한다. 이를 위해 본 논문에서는 셀 재설정 과정이라 불리는 스캔 시작과정의 문제점을 식별하고 이를 해결하기 위한 수신 신호 강도 기반 동적 스캔 시작 기법을 제안한다. 모의실험을 통해 제안 기법은 필요한 스캔 지속 시간을 고려한 수신 신호 강도 예측을 통해 적시에 스캔 과정을 시작하여 불필요한 자원의 낭비와 늦은 핸드오버를 야기시키지 않는다는 것을 보였다.