• International Journal of Industrial Entomology and Biomaterials
• /
• v.17 no.1
• /
• pp.125-129
• /
• 2008

The purpose of this study was to investigate the characteristics of Mamestra brassicae nucleopolyhedrovirus (MabrNPV)-K1 isolated in Korea. Polyhedra of MabrNPV-K1 showed irregular appearance in shape with the average diameter $1.8{\mu}m$. MabrNPV-K1 contained a number of nucleocapsids within a viral envelope embedded in polyhedron. The polyhedrin of MabrNPV-K1 was composed of single polypeptide with a M.W. of approximate 31 kDa which is identical to the commercialized MabrNPV, Mamestrin, as a biological control agent. The nucleotide and amino acid sequences within the coding region of MabrNPV-K1 polyhedrin shared 99.0% similarity with the polyhedrin gene from previous reported MabrNPVs. The median lethal concentrations ($LC_{50}$) of MabrNPV-K1 and Mamestrin to M. brassicae larvae were $3.9{\times}10^3$ PIBs/larva and $6.0{\times}10^4$ PIBs/larva, respectively. Mortality of the MabrNPV-K1 against to the third instars larvae was 15 times higher than that of the Mamestrin. The median lethal times ($LT_{50})$ of MabrNPV-K1 by the concentration of polyhedra were lower ($4.4{\sim}6.1$ days) than those of Mamestrin ($4.1{\sim}8.6$ days). These results suggest that a local strain MabrNPV-K1 has high pathogenicity to M. brassicae and may be useful for the development of biological control agent to control this.

• Membrane and Water Treatment
• /
• v.15 no.2
• /
• pp.59-66
• /
• 2024

This study evaluated the performance of a membrane aerated biofilm reactor (MABR) for nitrogen removal from a high-strength ammonia nitrogen-containing wastewater. The experimental setup consisted of four compartments that are sequentially anaerobic and aerobic to achieve complete nitrogen removal. The last compartment of the reactor setup contained a membrane bioreactor (MBR) to reduce sludge production in the system and to obtain a better-quality effluent. Continuous experiment over a period of 47 days showed that MABR exhibited excellent NH₄⁺-N removal efficiency (99.5%) compared to the control setup without MABR (56.5%). The final effluent NH₄⁺-N concentration obtained in the MABR was 2.99±1.56 mg/L. In contrast to NH₄⁺-N removal, comparable TOC removal values in the MABR and the control reactor (99.2% and 99.3%, respectively) showed that air supply through MABR is much more critical for denitrification than for organic removal. Further study to understand the effect of air supply rate and holding pressure on NH₄⁺-N removal in MABR revealed that an increase in both these parameters positively impacted reactor performance. These parameters are related to oxygen supply to the biofilm formed over the membrane surface, which in turn influenced NH₄⁺-N removal in MABR. Among the two different strategies to control biofilm over the membrane surface, results showed that scouring for a duration of 10 min on a weekly basis, along with mixing air supply, could be an effective method.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.21 no.1
• /
• pp.139-143
• /
• 2010

The objective of our study was the formulation of a local strain of Mamestra brassicae nucleopolyhedrovirus-K1 (MabrNPV-K1) for the development of viral insecticide to control M. brassicae. To formulate MabrNPV-K1, feeding toxicities of various supplements and ultraviolet (UV)-protection were investigated. Optical brightener Tinopal UNPA-GX (Tinopal) as UV protectant and Bentonite had some toxicity themselves to increase the mortality. The protection of polyhedra from UV light radiation was observed only by Tinopal. The MabrNPV-K1 was formulated as a wettable powder form. The mortality of the formulation was higher and rapid than that of the un-formulated. This suggested the possibility of MabrNPV-K1 formulation as an effective biological control agent for M. brassicae.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.624-629
• /
• 2005

The purpose of this study is to investigate the performance of nitrogen removal using autotrophic microorganism in the Membrane-Attached Biofilm Reactor (MABR). The treatment system consists of an aerobic MABR (R1) for nitrification and an anaerobic MABR (R2) for hydrogenotrophic denitrification. Oxygen and hydrogen were supplied through the lumen of hollow-fiber membranes as electron acceptor and donor, respectively. In phase Ι, simultaneous organic carbon removal and nitrification were carried out successfully in R1. In phase II, to develop the biofilm on the hollow-fiber membrane surface and to acclimate the microbial community to autotrophic condition, R1 and R2 were operated independently. The MABRs, R1 and R2 were connected in series continuously in phase III and operated at HRT of 8 hr or 4 hr with $NH_4{^+}-N$ concentration of influent, from 150 to 200 mgN/L. The total nitrogen removal efficiency reached the maximum value of 99% at the volumetric nitrogen loading rate of $1.20kgN/m^3{\cdot}d$ in the combined MABR system with R1 and R2. The results in this study demonstrated that the combined MABR system could operate effectively for the removal of nitrogen in wastewater not containing organic materials and can be used stably as a high rate nitrogen removal technology.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.19 no.2
• /
• pp.237-241
• /
• 2009

The objective of our study was the evaluation of pathogenicity of a local strain of Mamestra brassicae nucleopolyhedrovirus-K1 (MabrNPV-K1) derived from a diseased larva of M. brassicae found in Korea. The effect of temperature and larval instar on the pathogenicity and production of MabrNPV-K1 was determined under laboratory conditions. The median lethal concentration ($LC_{50}$) values of MabrNPV-K1 for 3rd instar larvae were $3.7\times10^4$ PIBs/larva at $20^{\circ}C$, $9.9\times10^2$ PIBs/larva at $25^{\circ}C$ and $3.8\times10^2$ PIBs/larva at $30^{\circ}C$, respectively. The $LC_{50}$ for the 4th instar larvae was similar to that for the 3rd instar larvae. However, the pathogenicity to the 3rd instar larvae was higher than that to the 4th instar larvae. The median lethal time ($LT_{50}$) values of MabrNPV-K1 were 11.4 to 5.0 days at $30^{\circ}C$ and 18.3 to 5.5 days at $25^{\circ}C$ for the 3rd instar larvae. The $LT_{50}$ value was lowered as temperature went up to $30^{\circ}C$ and dependent on viral concentration. In production efficiency of MabrNPV-K1 using M. brassicae larvae, the mortality of the 3rd instar larvae was 100% when inoculated with $1.0\times10^5$ PIBs/larva and the yield of MabrNPV-K1 was maximal. Regarding the mortality, yield of polyhedra, inoculation doses and required time, the $1.0\times10^4$PIBs/larva at $30^{\circ}C$ was determined as optimal conditions producing polyhedra efficiently.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.2
• /
• pp.373-384
• /
• 2016

The membrane-aerated biofilm reactor (MABR) is a promising municipal wastewater treatment process. In this study, two cross-flow MABRs were constructed to explore the carbon and nitrogen removal performance and bacterial succession, along with changes of influent loading shock comprising flow velocity, COD, and NH₄-N concentrations. Redundancy analysis revealed that the function of high flow velocity was mainly embodied in facilitating contaminants diffusion and biosorption rather than the success of overall bacterial populations (p > 0.05). In contrast, the influent NH₄-N concentration contributed most to the variance of reactor efficiency and community structure (p < 0.05). Pyrosequencing results showed that Anaerolineae, and Beta- and Alphaproteobacteria were the dominant groups in biofilms for COD and NH₄-N removal. Among the identified genera, Nitrosomonas and Nitrospira were the main nitrifiers, and Hyphomicrobium, Hydrogenophaga, and Rhodobacter were the key denitrifiers. Meanwhile, principal component analysis indicated that bacterial shift in MABR was probably the combination of stochastic and deterministic processes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.136-136
• /
• 2012

기체부하가 작은 초고진공 시스템은 보통 60~360 l/s 정도의 배기속도를 가지는 이온펌프를 사용하고 있으며 $10^{-10}$ mbar대의 진공도를, 때에 따라서는 $10^{-11}$ mabr대의 도달진공도를 얻을 수 있다. 이온펌프의 단점 중 하나는 그 부피와 무게가 상당하다는 데 있고 따라서 사용자의 불편을 초래한다. 본 논문에서는 부피, 무게를 줄이면서도 동일한 진공성능을 구현하기 위한 노력을 보고하고자 한다. 아주 작은 크기의 이온펌프(10 l/s)와 소형 게터펌프를 조합하여 초고진공용 조합펌프를 구성하였고 그 진공특성을 조사하였다. 그 결과 작은 펌프의 조합으로도 $10^{-11}$ mabr대의 진공도를 비교적 손쉽게 얻을 수 있었으며 $10^{-10}$ mbar의 진공도는 재빨리 얻을 수 있었다.