• Journal of the Korean Ceramic Society
• /
• v.33 no.7
• /
• pp.779-784
• /
• 1996

The spinel/cubic stabilized zirconia composites were fabricated via, The reaction sintering of monoclinic zirco-nia(baddeleyite) added with MgAl powder. During heating Mg and Al were oxidizedfirst and subsequently the oxides formed spinel (MgAl2O4) and finally remained MgO stabilized the zirconia, Because the oxides formed during the oxidation process would have very fine grain size (order of submicron) mainly due to the effects of attrition milling the reaction sintering was more effective in densification and improvement of strength and fracture toughness than conventional sintering with direct addition of MgO. The sintering behavior phase transformation during firing and mechanical properties of sintered body were investigated with emphasis on the relations between spinel formation due to MgAl addition and sintering and mechanical properties.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.21-29
• /
• 2008

Waste shell powder was added to the high density polyethylene(HDPE), and resultant mechanical properties and flame retardancy were analyzed in terms of shell content. Compatibilizer(PE-g-MA) was used to enhance the mechanical properties of the prepared HDPE/shell composites, and several flame retardant agents($Al_2O_3$, $Sb_2O_3$) were utilized to improve flame retardancy. Addition of the compatibilizer resulted in an improved mechanical properties due to the increased interfacial bonding between HDPE matrix and shell powder. In the case of impact strength, it even reached to the impact strength of pure HDPE. Also the addition of the flame retardant agents did not exhibit mechanical property decrease. UL-94 flammability test on the prepared HDPE/shell composites indicated that at 40wt% of shell only inclusion, time to ignite the flame and the total time of flame duration increased. When flame retardant agents mixed with shell powder were added to the HDPE matrix, improved flame retardancy was observed. Generally, flame retardancy effect of $Al_2O_3$ was better than $Sb_2O_3$. UL-94 V-0 classification was observed for the specimens with $Al_2O_3$ and compatibilizer at more than 40wt% shell, and also for specimens with $Sb_2O_3$ and compatibilizer at all shell content.

• Korean journal of food and cookery science
• /
• v.28 no.4
• /
• pp.399-405
• /
• 2012

This study was carried out to investigate the effect of safflower seed powder on the physicochemical characteristics of ground pork during refrigerated storage. Three types of ground pork were evaluated: 20% pork fat added (PF, control), 10% pork fat and 10% added safflower seed powder (PFS), and 20% added safflower seed powder (SS). The pH increased during storage, but decreased after 10 days of the storage (p<0.05). The pH was lower in PFS and SS than that in PF after 10 days of storage (p<0.05). The TBARS (2-thiobarbituric acid reactive substances) values increased with longer storage period (p<0.05), and those of PF, PFS and SS were 1.186, 0.686 and 0.577 mg MA/kg, respectively, after 10 days of storage. The $L^*$ values for external color of PF and PFS decreased (p<0.05), but that of SS was not significantly different after a longer storage period. The $a^*$ values decreased (p<0.05), but the $b^*$ values were not significantly different with longer storage period. The $L^*$ values for internal color of PFS and SS decreased (p<0.05), but that of PF was not significantly different with longer storage period. The $a^*$ value of PF decreased (p<0.05), but that of SS increased with longer storage period. The $b^*$ value decreased (p<0.05), but those of PFS and SS were not significantly different with longer storage period. Water holding capacity decreased with longer storage period, and that of SS was the highest (p<0.05). Cooking loss of PFS and SS was not significantly different with longer storage period, and that of PF was the highest (p<0.05). The reduction in diameter of the samples was not significantly different with longer storage period, and that of PF was the highest (p<0.05). Hardness and chewiness of samples increased, but springiness and cohesiveness decreased with longer storage period (p<0.05). Replacing animal fat with safflower seed powder was effective and may be useful as an innovative meat product.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1881-1886
• /
• 2010

Hydrothermal reaction of zinc(II) salts with 5-sulfoisophthalic acid monosodium salt ($NaO_3SC_6H_3$-1,3-(COOH)$_2$, $NaH_2$-SIP) and 1,10-phenanthroline (phen) led to two new compounds, [Zn(phen)$_3$$\cdot2H_2SIP\cdot4H_2O$ (1) and [Zn(phen)$_2(H_2O)_2]\cdot2H_2SIP\cdot2H_2O$ (2). They were characterized by element analysis, IR spectroscopy, thermalgravimetric analysis (TGA), X-ray powder diffraction (XRD), and single-crystal X-ray diffraction. Both compounds 1-2 represent the first example of Zn/phen/SIP system. The Zn (II) ion in 1 is six-coordinated by six nitrogen atoms from three phen molecules, and the $H_2SIP^-$ ligands engage in the formation of hydrogen bond. The Zn(II) ion in 2 is coordinated by four nitrogen atoms from two phen molecules and two oxygen atoms from two water molecules. Moreover, both 1 and 2 are assembled into 3D supramolecular architectures by hydrogen bonds (O-H$\ldots$O) and $\pi-\pi$ interactions. Solvent water molecules occupying voids of the compounds serve as receptors or donors of the extensive O-H$\ldots$O hydrogen bonds.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.255-261
• /
• 2004

Antioxidant activity of extracts from the submerged-liquid culture of mushrooms was measured using two systems : linoleic acid and mouse liver microsomes induced by various free radical sources. Mushrooms of Pleurotus ostreatus (Neutari), Phellinus linteus (Sanghwang), Paecilomyces japonicus (Dongchunghacho), Hericicum erinacium (Norugungdengyee) and Agaricus blazei (Shinryeong) in 1% mulberry tree powder-supplemented medium were incubated in a shaking incubator (200 rpm, $25^{\circ}C$) for 3 days. Hot water extracts of mycelial cultures were freeze-dried, followed by fractioning with hexane, chloroform, ethylacetate and butanol in the order. Antioxidant activity of each sample was examined in free radical-induced linoleic acid oxidation in phosphate-buffered saline (PBS ) solution by measuring the amount of malonaldehyde (MA), and mouse liver microsomal systems by measuring the amount of thiobarbituric acid reactive substances (TBARS). In linoleic acid oxidation system, hot water extracts from the cultures of Pleurotus ostreatus, Phellinus linteus, and Paecilomyces japonicus exhibited stronger antioxidant activity than aqueous or butanol fraction and the combined fraction of hexane, chloroform and ethylacetate, but the hot water extract from Pleurotus ostreatus culture was the strongest activity. The antioxidant activity of the hot water extract from Pleurotus ostreatus culture was stronger than any other fractions in mouse microsomal system. These results suggest that hot water extract of Pleurotus ostreatus culture, and the cultures of Phellinus linteus and Paecilomyces japonicus could be useful for functional materials to reduce the oxidation of lipids in food systems induced by free radicals.

• Korean journal of food and cookery science
• /
• v.21 no.5
• /
• pp.629-636
• /
• 2005

This study was carried out to investigate of the quality characteristics of the starch Oddi Dasik(MSOD) manufactured with various addition levels (0, 5, 10, 18 and 28%) of mulberry fruit (Oddi) juice (MFJ), with various levels(55%, 50%, 45%, 37% and 27%) of sucrose syrup, and with the ratio of rice powder: mungbean starch (1:4) according to the traditional Korean Dasik (a kinds of cookie) methodology. The nutritional components of Oddi and MSOD were examined, and sensory evaluation and physical tests of MSOD added MFJ were conducted. The results are summarized as follows. In Oddi, the contents of moisture, crude fat, crude protein, crude ash, and vitamin C, and the levels of acidity, pH and sugar were 88.45%, 0.245%, 2.23%, 0.88%, 53.20 mg%, 8.00%, 4.41 and 11.0 Brix%, respectively. In MSOD (Oddi 10%), the contents of moisture, crude fat, crude protein, and crude ash, were 22.8%, 0.117%, 9.2% and 0.8%, respectively, and were all increased with increasing MFJ amount. In MSOD (Oddi 10%), the contents of Ca, Mg, K and Fe were 63.2 mg%, 70.9 mg%, 376.0 mg% and 7.7 mg%, respectively. and were increased with increasing MFJ amount. For the establishment of the additional amount of MFJ, sensory evaluation and physical tests were conducted. From the total characteristics of sensory evaluation, the MSOD with 10% MFJ was judged as the best. Color L and b values of MSOD significantly decreased and a value increased with increasing MFJ percentage. Hardness, gumminess, adhesiveness and chewiness among the texture characteristics of MSOD were significantly increased with increasing MFJ amount. However, there were no significant differences in springiness and cohesiveness of the MSOD. In conclusion, the optimal added amount of MFJ for the manufacture of the MSOD was proposed to be 10% of the total weight.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.10
• /
• pp.665-670
• /
• 2016

Prevailing dissemination of machine tools and cutting technology have caused drastic developments of high speed dry machining with work materials of high hardness, and demands on the high-hardness-materials with high efficiency have become increasingly important in terms of productivity, cost reduction, as well as environment-friendly issue. Addition of Si to TiAlN has been known to form nano-composite coating with higher hardness of over 30 GPa and oxidation temperature over $1,000^{\circ}C$. However, it is not easy to add Si to TiAlN by using conventional PVD technologies. Therefore, Ti-Al-Si-N have been prepared by hybrid process of PVD with multiple target sources or PVD combined with PECVD of Si source gas. In this study, a single composite target of Ti-Al-Si was prepared by powder metallurgy of MA (mechanical alloying) and SPS (spark plasma sintering). Properties of he resulting alloying targets were examined. They revealed a microstructure with micro-sized grain of about $1{\sim}5{\mu}m$, and all the elements were distributed homogeneously in the alloying target. Hardness of the Ti-Al-Si-N target was about 1,127 Hv. Thin films of Ti-Al-Si-N were prepared by unbalanced magnetron sputtering method by using the home-made Ti-Al-Si alloying target. Composition of the resulting thin film of Ti-Al-Si-N was almost the same with that of the target. The thin film of Ti-Al-Si-N showed a hardness of 35 GPa and friction coefficient of 0.66.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.1
• /
• pp.12-17
• /
• 2004

High critical current density. $J_c$ over $1MA/cm^2$ at 77 K in a self field was successfully achieved from the YBCO film prepared on (100) $SrTiO_3$ single-crystal substrates by the TFA-MOD process. Unlike a normal TFA-MOD process, we prepared the TFA precursor solution by dissolving YBCO powder into the trifluoroacetic acid. A significant amount of the second phases, including $BaF_2$, was observed in the films fired at $700-725^{\circ}C$ for 2 h under $P(O_2)=10^{-3}$ atm and $P(H_2O)=4.2%$, most probably due to an insufficient reaction time, and hence $T_c$ was greatly degraded. However the films fired at $750-800^{\circ}C$ for 2 h were composed of strongly c-axis oriented YBCO grams without any second phases. and exhibited the $T_c$ values of 89.5 ~ 91 K with a sharp transition. With increasing the firing temperature from 750 to $800^{\circ}C$ average grain size of YBCO was increased and grain connectivity was enhanced. The highest $J_c$ value of $1.1MA/cm^2$ was obtained from the YBCO film fired at $800^{\circ}C$.

• YAKHAK HOEJI
• /
• v.53 no.5
• /
• pp.293-297
• /
• 2009

The abuse of methamphetamine (MA) is one of the most serious drug abuses in Asia. And, the prevention of precursor production for abuse drug is one of the most effective drug control system. Isotope ratio analysis at natural abundance levels have been used to establish the environmental source or the geographic origin of various biological and nonbiological materials. Ephedrine, the precursor of MA, is produced by one of three methods; extraction from Ephedra plants, full chemical synthesis or via a semi-synthetic process involving the fermentation of sugar, followed by amination. We investigated the origin of ephedrine and pseudoephedrine based on the carbon and nitrogen values for nineteen pharmaceutical powder materials (PPMs) obtained from pharmaceutical company in Korea by stable isotope ratio mass spectrometry coupled to an elemental analyser (EA-IRMS). The carbon delta values for the ephedrine and pseudoephedrine were -24.21~-22.72 (mean=-23.72) $^{\cir}/_{\circ\circ}$ and -23.79~-22.71 (mean=-23.48) $^{\cir}/_{\circ\circ}$. The nitrogen delta values were 3.51~5.55 (4.43) $^{\cir}/_{\circ\circ}$ and 2.24~8.22 (5.42) $^{\cir}/_{\circ\circ}$. These results indicate that PPMs are semi-synthetic products. Therefore the origins of ephedrine(natural, semi-synthetic or synthetic) could be discriminated by using carbon and nitrogen stable isotope ratios. we are sure tat this stable isotope ratio analysis can discriminate the origins of precursors of methamphetamine.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1994.10b
• /
• pp.15-15
• /
• 1994

M MA ODS 합금의 보다 폭넓용 실용확훌 위해 크게 요구되고 있는 적정 접합기술 개발의 한 방안￡로, 마찰압접(Friction Welding) 방법의 가능성옳 조사하기 위하여 마찰압력과 시간, 마 찰 후 접촉압력(Upset Pressure) 풍을 다양하게 변화시켜 접합체톨 제조한 후, 접합체 강도에 대한 인장시험과 접합계연의 결합 및 미세구조에 대한 현미경 관찰, EDS에 의한 원소분석, 접 합이옴부의 경도분포와 파단면 분석 풍율 행하였다. 실험에 사용된 모재는 기계적 합금법으로 제조된 Inca사의 Ni기 MA 754 합금이었으며, 직경 l 10 mm, 길이 50 mm로 가공한 후, 아세통￡로 초음파 세척하여 접합에 사용하였다. 접합온 브 레이크식 마찰압접기틀 사용하여 행하였으며, 회전시험편의 회전수는 2400 rpm이었A며, 다른 한쪽의 고정시험편과의 마찰압력 및 마찰시간온 각각 50 - 500 MPa과 1-5초로, 또한 업셋압 력도 50 - 600 MPa로 변화시켰다. 이때 업셋압력은 모든 시편에 대해 일정하게 6초동안 가하 였다. 얻어진 접합체는 각 압접조건 당 2개 이상의 접합시험편에 대해 상온 인장강도톨 측정하 였으며, 파단이 일어난 위치를 확인한 후 파면에 대한 분석율 주사전자현미경(SEM)과 에너지 분산형 분광분석기mDS)릎 사용하여 행하였다. 컵합이옴부의 첩합성올 확인하기 위하여, 접합 체를 접합변에 수직으로 절단, 연마한 후 광학현미경과 SEM, EDS 퉁으로 관찰, 분석하여 접 합부의 형상과 결합형성 여부, 접합계면의 미세조직 퉁옳 조사하였다. 또한 마찰압접에 따론 모재와 접합계연부의 경도분포훌 접합이옴부로부터 모재쪽으로 일정 간격율 두어 마이크로 비 커스 경도기로 측정, 조사하였다. 이상의 설험 결과, 다옴과 같온 결론옳 얻었다. ( (1) 접합체 강도가 모채 강도의 95% 이상이 되는 양호한 렵합체흩 얻기 위한 마찰압력 조건 온, 2400 rpm의 회전속도와 6초의 업셋압력 유지시간에서 마찰압력과 업셋압력, 그리고 마찰시 간이 각각 400 MPa 이상과 500 MPa 이상,2초입율 확인하였다. ( (2) 컵합이옴부의 관찰 결과, 모든 마찰압접 조건에서 컵합이옴부는, 기폰 모재의 texture 조직 을 유지하고 있는 모재부 영역(영역 ill)과 첩합계면부에 인접하여 업셋압력이 주어질 때 단조 효과에 의해 계연 외부로 metal flow가 일어나면서 형성된 영역 II, 매우 미세한 결정립으로 구성된 중앙부의 영역 1 로 이투어져 있옴융 확인하였다. ( (3) 최적접합조건이 충족되지 않온 경우, 접합부의 영역 I 에서 관찰된 void와 균열, 불균일한 접합계면 통의 접합결함에 Al과 Y. Ti 퉁￡로 구성된 산화물률이 용집되어 있옴을 확인하였 다-( (4) 접합체의 파단 양상온 크게 접합부 파단과 모재부 파단, 이률의 혼합형 파단i로 나눌수 있었다. 모재부 파단의 경우, 파단면이 매끄럽고 파변상의 결정립도 매우 미세하였으며, 산확물 의 용집도 찾아보기 어려웠 나, 접합부 파단의 경우에는 파변의 굴곡이 비교척 심하고 연성 입계파괴의 형태를 보였￡며, 결정립도 모채부 파단의 경우에 비해 조대하였다. 조대하였다.