• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.2
• /
• pp.135-142
• /
• 2009

This experiment was conducted to determine the usability of biodegradable plastic in the mulching cultivation of sweetpotato. For this, we investigated the physical characteristics, biodegradability, leaching, yield, workability, etc. of biodegradable films. Compared with general mulching materials, biodegradable Poly butyleneadipate-co-butylene succinate (PBSA) and PLC+starch showed $2{\sim}27$% higher tensile strength, but $2{\sim}22$% lower elongation and $2{\sim}6$% lower tear strength. In the leaching test on the biodegradable films, heavy metals were detected very little or not at all. As to difference in ground temperature according to mulching material, the temperature was high in order of PLC+starch > PBSA > Low Density Polyethylene (LDPE) > Control during the period from late June to mid July, but in order of LDPE > PLC+starch > PBSA > None during the period from late July to late September. In the mulching cultivation of sweet potato, biodegradable films PBSA (EA, EB, EC) and PLC+starch (DD, DE, DF) began to degrade after 60 days from the cut planting of sweet potato, and over 95% degraded after 120 days. The quantity of roots was 3,070 kg/10a for PBSA, 3,093 kg/10a for PLC-starch, and 2,946 kg/l10a for LDPE, showing no significant difference according to mulching material. Considering the physical characteristics, biodegradability, environment, convenience in harvesting work, yield, etc. of the films in the mulching cultivation of sweet potato, biodegradable films are expected to be very useful.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.433-440
• /
• 2009

Korean sweetpotato, Ipomoea batatas, varieties were examined for their flowering response as a fundamental research to improve breeding efficiency by hybridization of this crop. Under 10.0~10.5 hours short day condition, self-rooted plants of three varieties such as Shinmi, Hongmi and Hwangmi flowered sparsely or moderately, and those of fourteen varieties including Eunmi flowered very sparsely. Under 10.6~12.0 hours day length condition, self-rooted plants of three varieties such as Shinmi, Hongmi and Hwangmi flowered very sparsely. Under the day length longer than 12 hours, none of the tested plants flowered. In all the sweetpotato plants grafted on morning glory, flowering occurred with varying degrees by varieties and day lengths. Under 10.0~10.5 hours day length, thirty two varieties including Hongmi flowered moderately or profusely, and one variety such as Mokgye 1 flowered sparsely. Under 10.6~12 hours day length, twenty three varieties including Sinchunmi flowered moderately or profusely, nine varieties including Jeungmi flowered sparsely, and Mokgye 1 didn't flower at all.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.2
• /
• pp.55-64
• /
• 1988

Stow nets have widely been used in the western sea of Korea from the olden age. The original structure of a stow net is a large square-sectional bag net made of 4 netting panels, and the front fringes of top and bottom panels are connected to the top and bottom beams respectively. Wire ropes, which is originated from the holding anchor are gradually forked and biforked, and finally 4 pieces of wire rope (biforked pendants) are jointed to each beam. Much convenience caused by long and heavy beams were problemed, then some studies have been carried out to improve the net since 1930's. The most effective improvement were achieved in 1980 by Mr. Han and his colleagues. The key point of improvement was that the beams were removed and the belt shaped shearing device made by canvas was attached to the side panels, the head rope and ground rope to the front fringe of top and bottom panel, and biforked pendants are joined to the shearing device. Even though this is the epoch-making improvement of a stow net, the further study should be required to find out more effective method. The authors carried out a model experiment on the stow net to determine the vertical and horizontal opening of a net mouth, and also examine the front, top and side-view configuration of the net. The model net was constructed depending on the Similarity Law of Fishing Gear in 1/10 and 1/20 scale and set against to the current at shallow and speedy flowing channel. The vertical and horizontal openings were determined by using scaled bamboo poles, and the configuration was observed by using specially prepared observation platform and underwater observation glass, and also photographed by using specially prepared underwater photographic equipment. The results obtained can be summarized as follows: 1. The opening height and width of the shearing device varied in accordance with the relative length of the biforked pendants. Considering the height and width of shearing device in 6 cases of the arrangement system of biforked pendants, the best result was obtained in the case that the 2nd, 3rd and 4th pendents from the bottom-most was 5%, 9% and 4% longer than that. 2. On the top-view configuration the excessive deformation of head rope and ground rope were observed. In the actual net, 54m long head rope and ground rope were attached to the front fringe of top and bottom panels so that the head rope may be lifted to make the net mouth open highly. But actually the head rope and the ground rope are streamed backward without any lift, and also the netting followed the ropes were deformed until the 2/5 in the whole length of the net. This deformation may be guessed to disturb the entrance of fish school into the net and also caused the net to get caught by obstacles in the sea bed and to be broken largely. 3. Hydrodynamic resistance R of the actual net may be deduced as R(kg)=29.2$\times$103 v1.65. It is also expressed as R(kg)=5.9$\times$d/l$\times$ab v1.65. depending on the formula deduced by Koyama to estimate the resistance of trawl nets, where d/l denote the ratio between diameter of netting twine and length of mesh leg in every part of side panel, a and b, the stretched circumference of the mouth and the stretched length of the net, respectively.

• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.484-491
• /
• 2005

Quantitative microbial risk assessment (QMRA) analyzes potential hazard of microorganisms on public health and offers structured approach to assess risks associated with microorganisms in foods. This paper addresses specific risk management questions associated with Staphylococcus aureus in kimbab and improvement and dissemination of QMRA methodology, QMRA model was developed by constructing four nodes from retail to table pathway. Predictive microbial growth model and survey data were combined with probabilistic modeling to simulate levels of S. aureus in kimbab at time of consumption, Due to lack of dose-response models, final level of S. aureus in kimbeb was used as proxy for potential hazard level, based on which possibility of contamination over this level and consumption level of S. aureus through kimbab were estimated as 30.7% and 3.67 log cfu/g, respectively. Regression sensitivity results showed time-temperature during storage at selling was the most significant factor. These results suggested temperature control under $10^{\circ}C$ was critical control point for kimbab production to prevent growth of S. aureus and showed QMRA was useful for evaluation of factors influencing potential risk and could be applied directly to risk management.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Journal of Animal Environmental Science
• /
• v.14 no.3
• /
• pp.167-174
• /
• 2008

This survey was conducted to investigate housing types of Korean native cattle and beef cattle farms in Korea. The farm sized over 50 heads of cattle, 7,433 farms were surveyed. Regarding housing types for Korean native cattle and beef cattle, litter barn, freestall, mooring+litter ground and others accounted for 87.1, 9.8, 3.0, and 2.9 %, respectively. Most of Korean native cattle and beef cattle farms (94.7%) used litter floor rather than scraper. As for roof types, slate, panel, iron plate, galvanized plate, colored iron plate and sunlight represented 32.2, 13.7, 12.2, 10.2, 9.7, and 8.9 %, respectively. Open side wall type and winch curtain were 55.6, and 47.6 %, respectively. Bigger farms seemed to used more winch curtain than open style. Utilization period of automatic feeder, waterer, electric facility, and cooling facility was 6.7, 8.0, 8.5, and 6.0 years, respectively.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.1
• /
• pp.51-54
• /
• 2018

Purpose $^{18}F-THK5351$ is the newly developed PET probe for tau imaging in alzheimer's disease. The purpose of study was to establish the automated production of $^{18}F-THK5351$ on a commercial module. Materials and Methods Two different approaches were evaluated for the synthesis of $^{18}F-THK5351$. The first approach (method I) included the nucleophilic $^{18}F$-fluorination of the tosylate precursor, subsequently followed by pre-HPLC purification of crude reaction mixture with SPE cartridge. In the second approach (method II), the crude reaction mixture was directly introduced to a semi-preparative HPLC without SPE purification. The radiosynthesis of $^{18}F-THK5351$ was performed on a commercial GE $TRACERlab^{TM}$ $FX-_{FN}$ module. Quality control of $^{18}F-THK5351$ was carried out to meet the criteria guidelined in USP for PET radiopharmaceuticals. Results The overall radiochemical yield of method I was $23.8{\pm}1.9%$ (n=4) as the decay-corrected yield (end of synthesis, EOS) and the total synthesis time was $75{\pm}3min$. The radiochemical yield of method II was $31.9{\pm}6.7%$ (decay-corrected, n=10) and the total preparation time was $70{\pm}2min$. The radiochemical purity was>98%. Conclusion This study shows that method II provides higher radiochemical yield and shorter production time compared to the pre-SPE purification described in method I. The $^{18}F-THK5351$ synthesis by method II will be ideal for routine clinical application, considering short physical half-life of fluorine-18 ($t_{1/2}=110min$).

• Journal of radiological science and technology
• /
• v.21 no.1
• /
• pp.79-87
• /
• 1998

The total-bodies of 10 week-old Sprague-Dawley rats were irradiated with single doses 4.5 and 7.5 Gy, respectively. The effects on plasma and sciatic nerve platelet-derived growth factor(PDGF) concentrations and sciatic nerve PDGF ${\alpha}$ -and ${\beta}$ -receptors densities were examined up to 10 days post-treatment. There was no consistent significant variation in the plasma and sciatic nerve PDGF concentrations in time over the period of study between 4.5 and 7.5 Gy groups. Plasma PDGF concentrations were significantly reduced to 58% of control values between 5 and 10 days with 4.5 Gy and to 51% of control values as percentage of control values between 5 and 10 days with 7.5 Gy after irradiation, respectively(p<0.05). Sciatic nerve PDGF concentrations were increased to 118% of control values at 1 day with 4.5 Gy and to 130% of control values at 1 day with 7.5 Gy after irradiation, respectively(p>0.05). After irradiation, the levels of PDGF ${\alpha}$ -receptor protein density were reduced to 33% of control values at 2 days with 4.5 Gy and to 50% at 2 days with 7.5 Gy, while the levels of PDGF ${\beta}$-receptor protein density were reduced to maximally 26% of control values at 2 days with 4.5 Gy and to 27% at 2 days with 7.5 Gy, respectively, but both initial decreased levels of those were increased subsequently after 2 days following irradiation. These results suggest that the radiation-induced alteration of plasma and sciatic nerve PDGF concentrations, and sciatic nerve PDGF ${\alpha}$ -and ${\beta}$ -receptors densities may be involved in the pathogenesis of bone marrow stem cell and peripheral neuron damages.

• Journal of Chest Surgery
• /
• v.35 no.8
• /
• pp.573-579
• /
• 2002

Background: In this study, the role and the surgical outcome of the modified Blalock-Taussig shunt in the treatment of the infants with cyanotic complex congenital heart diseases were investigated. Material and Method: Over the last 12 years, 105 modified BT shunts were performed in 100 infants. Postoperative course, shunt patency rate, complications, mortality and its risk factors were reviewed restrospectively. Result: The mean age at operation was 43.0$\pm$36.6 days. Sex ratio was 60:40(M:F). The postoperative oxygen saturations were lowest after mean duration of 11 hours after the shunt procedure. The operative mortality was 8%(8) with 3 late deaths. Causes of operative death included failure of maintenance of minimum oxygenation during the procedure(2), immediate postoperative shunt occlusion(2), respiratory failure(2), low cardiac output due to heart failure and pericardial effusion(2) and sepsis(2). Late deaths resulted from acute cardiac arrest during the follow up cardiac catheterization, hypoxic myocardial failure, and arrhythmia. Year of surgery, shunt size, age at operation, and complexity of the anomalies were not the risk factors for mortality. Six month shunt patency rate was 97% and overall patency rate was 96%. Postoperative complications comprised of shunt occlusion(6), phrenic nerve palsy(3), and wound infection(2). Conclusion: We demonstrated that modified Blalock-Taussig shunt was a useful tool to palliate the infants with complex cyanotic heart disease in whom early complete repair was not feasible with acceptable mortality and patency rate. An adequate postoperative management and a meticulous surgical technique may be key factors for the better results.

• Journal of Nutrition and Health
• /
• v.18 no.4
• /
• pp.259-271
• /
• 1985

The purpose of this study was to develop supplementary foods for infants and young children in order to improve their nutritional status. Three formulas composed of rice, soybeans, fish, dry skim milk and sesame in varying proportions were studied. The three formulas, $RS_{1}S_{2}$, $RFS_{1}S_{2}$, and $RMS_{1}S_{2}$, were consisted of Rice(R), Soybean$(S_{1})$, Sesame$(S_{2})$ (60 : 35 : 5) , Rice, Fish(F), Soybean, Sesame (60 : 10 : 25 : 5) , and Rice, Dry Skin Milk (M), Soybean, Sesame (60 : 10 : 25 : 5), respectively. A proximate analysis and amino acid determination were made on the developed formulas. In the animal assay, growth rate, PER and FER were evaluated and biochemical analyses were also carried out. A storage test and the cost evaluation were also conducted. The summarized results are as follows : 1) The proximate composition of the three formulas were 7.3-7.4% of moisture, 15.9-21.5% of crude protein, 7.8-9.6% of crude fat and 2.5-2.8% ash. 2) The result of amino acid analysis showed that the 1st limiting amino acids of $RS_{1}S_{2}$ and $RFS_{1}S_{2}$ were lysine (amino acid score, 76.6) and threonine (amino acid score, 93.3), and that of $RMS_{1}S_{2}$ and the commercially prepared formula were sulfur containing amino acids (amino acid score, 82.0 and 54.4). When the contents of the amino acids of the three formulas were compared with mother's milk and cow's milk, the balance of the amino acid of each formula was superior to mother's milk but inferior to cow's milk. 3) In the animal assay, the growth rate of all groups increased gradually during the experimental period. 4) The C- PER, which was corrected on the basis of the casein PER of 2.5 was 2.99, 3.38 and 3.10 in the $RS_{1}S_{2}$, $RFS_{1}S_{2}$ and $RMS_{1}S_{2}$ respectively. The C- PER of $RFS_{1}S_{2}$ and $RMS_{1}S_{2}$ were Significantly (P<.05) higher than that of the casein. 5) The FER of the casein, $RS_{1}S_{2}$, $RFS_{1}S_{2}$, and $RMS_{1}S_{2}$ were 0.37, 0.39, 0.43 and 0.39, respectively. The FER of $RFS_{1}S_{2}$ and $RMS_{1}S_{2}$ were also significantly (P<.05) higher than that of the casein. 6) The concentrations of hematocrit, hemoglobin, total protein and albumin in the serum of the rats of all groups were not significantly different among groups. 7) The storage stability test showed that the total plate count (TPC), the coliforms count and the bacterial spore count in the ingredients were quiet low. However, after 30 and 60 days storage, the count in $RFS_{1}S_{2}$ increased and were higher at room temperature than refrigerated temperature. 8) In the cost evaluation, the cost of the developed formulas was \1,826-2,626 / kg. This was less than that of the commercially prepared formula (\3,300-4,073 / kg) and that of the imported formula (\4,250-8,720 / kg).