• Journal of the Korean institute of surface engineering
• /
• v.49 no.2
• /
• pp.218-224
• /
• 2016

Thermal radiation pastes were prepared by dispersing carbon materials as fillers with a content of 1 weight percent in an acrylic resin. The kind of fillers was as follows; $25{\mu}m$ graphite, $45{\mu}m$ graphite, $15{\mu}m$ carbon nanotube(CNT), a 1:1 mixture of $25{\mu}m$ graphite and $15{\mu}m$ CNT, and a 1:1 mixture of $45{\mu}m$ graphite and $15{\mu}m$ CNT. Thermal emissivity was measured as 0.890 for the samples with graphite only, 0.893 for that with CNT only, and 0.892 for those containing both. After coating prepared pastes on a side of 0.4 mm thick aluminium plate and placing the plate over an opening of a box maintained at $92^{\circ}C$ with the coated side out, the temperatures on the uncoated side of the plates were measured. The samples containing graphite and CNT showed the lowest temperatures. The paste with mixed fillers was coated on the back side of the PCB of an LED module and thermal analysis was carried out using Thermal Transient Tester (T3ster) in a still air box. The thermal resistance of the module with coated PCB was measured as 14.34 K/W whereas that with uncoated PCB was 15.02 K/W. The structure function analysis of T3ster data revealed that the difference between junction and ambient temperatures was $13.8^{\circ}C$ for the coated case and $18.0^{\circ}C$ for the uncoated. From the infrared images of heated LED modules, the hottest-spot temperature of the module with coated PCB was lower than that of the uncoated one for a given period of LED operation.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.986-994
• /
• 2017

In this paper, $CO_2$ absorption of scrubber was tested for removal of high concentration $CO_2$. Liquid to gas ratio($18L/m^3$) and Superficial velocity(0.14 m/s) was determined through Lab-scale test. As flow rates increase 1, 2, 3, 4 and $5m^3/min$, $CO_2$ removal efficiency decrease 98.47%, 96.46%, 92.95%, 89.71% and 85.49%. Also, the scrubber operation made energy improvement(5.4%), energy saving(11.5 TOE/year) and greenhouse gases reduction(6.5 TC/year).

• Journal of Periodontal and Implant Science
• /
• v.49 no.1
• /
• pp.25-38
• /
• 2019

Purpose: This study evaluated differences in bone healing and remodeling among 3 implants with different surfaces: sandblasting and large-grit acid etching (SLA; IS-III $Active^{(R)}$), SLA with hydroxyapatite nanocoating (IS-III $Bioactive^{(R)}$), and SLA stored in sodium chloride solution ($SLActive^{(R)}$). Methods: The mandibular second, third, and fourth premolars of 9 dogs were extracted. After 4 weeks, 9 dogs with edentulous alveolar ridges underwent surgical placement of 3 implants bilaterally and were allowed to heal for 2, 4, or 12 weeks. Histologic and histomorphometric analyses were performed on 54 stained slides based on the following parameters: vertical marginal bone loss at the buccal and lingual aspects of the implant (b-MBL and l-MBL, respectively), mineralized bone-to-implant contact (mBIC), osteoid-to-implant contact (OIC), total bone-to-implant contact (tBIC), mineralized bone area fraction occupied (mBAFO), osteoid area fraction occupied (OAFO), and total bone area fraction occupied (tBAFO) in the threads of the region of interest. Two-way analysis of variance (3 types of implant $surface{\times}3$ healing time periods) and additional analyses for simple effects were performed. Results: Statistically significant differences were observed across the implant surfaces for OIC, mBIC, tBIC, OAFO, and tBAFO. Statistically significant differences were observed over time for l-MBL, mBIC, tBIC, mBAFO, and tBAFO. In addition, an interaction effect between the implant surface and the healing time period was observed for mBIC, tBIC, and mBAFO. Conclusions: Our results suggest that implant surface wettability facilitates bone healing dynamics, which could be attributed to the improvement of early osseointegration. In addition, osteoblasts might become more activated with the use of HA-coated surface implants than with hydrophobic surface implants in the remodeling phase.

• Korean Journal of Metals and Materials
• /
• v.49 no.8
• /
• pp.635-641
• /
• 2011

The effect of high shear speed on shear force, shear energy and fracture surface was investigated for the solder joint of a $Sn-_{3.0}Ag-_{0.5}Cu$ ball. For both ENIG and OSP pads, the shear force increased with an increase in shearing speed to 0.3 m/s. However, for an ENEPIG pad, the shear force increased with an increase in shear speed to 0.6 m/s and kept almost constant afterward. The shear energy decreased with an increase in shearing speed for ENIG and OSP pads. For the ENEPIG pad, however, the shear energy almost remained constant in a shearing speed range 0.3-3.0 m/s. The fracture mode analysis revealed that the amount of brittle fracture for the ENIG and the OSP pads increased with shearing speed, and a complete brittle fracture appeared at 1.0 m/s for ENIG and 2.0 m/s for OSP. However, the ENEPIG pad showed only a ductile fracture until 0.25 m/s, and a full brittle fracture didn't occur up to 3.0 m/s. The fracture mode matched well with the shear energy. The results from the high speed shear test of SAC305 were similar to those of SAC105.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.169-177
• /
• 2012

A non-decimation second-order spatial moving average (SMA) discrete-time (DT) filter is proposed with reconfigurable null frequencies. The filter coefficients are changeable, and it can be controlled by switching sampling capacitors. So, interferers can be rejected effectively by flexible nulls. Since it operates without decimation, it does not change the sample rate and aliasing problem can be avoided. The filter is designed with variable weight of coefficients as $1:{\alpha}:1$ where ${\alpha}$ varies from 1 to 2. This corresponds to the change of null frequencies within the range of fs/3~fs/2 and fs/2~2fs/3. The proposed filter is implemented in the TSMC 0.18-${\mu}m$ CMOS process. Simulation shows that null frequencies are changeable in the range of 0.38~0.49fs and 0.51~0.62fs.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.27-32
• /
• 2007

This study focused on estimating the feasibility of a strong basic anion exchanger (PA312OH) as a sorbent for the removal of residual reactive dye and saving chemicals and water. Cellulose reactive dye C.I.RB49 was tested because reactive dye is the largest single group of dyes and that dye needs larger amount of inorganic salts as dyeing agent but nearly 50% of reactive dyes may be lost to the effluent. The adsorption characteristics of PA312OH for C.I.RB49 were as follows. Ion-selectivity among the dye and inorganic salts was Dye > ${SO_4}^{2-}$ > ${CO_3}^{2-}$ > $Cl^-$. C.I.RB49 was exchanged more than 3 times ${SO_4}^{2-}$ and ${CO_3}^{2-}$ and $Cl^-$ was not exchanged absolutely. The exchanging velocity was increased exponentially with increasing temperature. This result is positive effect on treating the high temperature dyeing process wastewater. The exchanged dye percents to initial were 96.8% and 99% at flow rate 20.5 mL/min. and 3.7 mL/min.. The exchanging capacity of PA312OH for C.I.RB49 was 215.2 mg/g at conc.=369.2 mg/L, Temp.=$25^{\circ}C$. 74% inorganic salts were recrystallized from real dark reactive color dyeing wastewater treated with PA312OH.

• Journal of Industrial Convergence
• /
• v.20 no.11
• /
• pp.35-39
• /
• 2022

The purpose of this study was to investigate the effect of sea salt on the growth and moisture content of sweet basil, soil moisture content, and salt stress. As a research method, sweet basil was treated with sea salt at 0, 5, 50, 100, and 200 mM concentration of sea salt was investigated to determine the growth and stress time of sweet basil. As a result of the study, it was confirmed that the leaf width increased by 11% when treated with 5 mM, 49% when treated with 50 mM, and 44% when treated with 100 mM. Leaf length was confirmed to grow by 16% at 5 mM, 59% at 50 mM, and 82% at 100 mM treatment. As a future study, based on the effect of sea salt on the leaf and length growth of sweet basil by concentration, it was considered that more research is needed on the beneficial effects of sea salt on edible, medicinal, and aromatic plants. In addition, although salt has only been studied on stress in crops, we intend to contribute to providing basic data for research on ingredients more beneficial to the environment by finding various edible, medicinal, and aromatic plants using the sun-dried salt used in this study.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.2
• /
• pp.111-120
• /
• 1998

The effects of chemical composition and thermal cycling on the martensitic transformation characteristics in Cu-rich, equiatomic and Zr-rich CuZr binary alloys have been studied by calorimetry. Only martensite could be indentified in equiatomic $Cu_{49.9}Zr_{50.1}$ alloy, while $Cu_{10}Zr_7$ and $CuZr_2$ intermetallic compounds as well as martensite were formed by rapid cooling from the melts in Cu-rich $Cu_{52.2}Zr_{47.5}$ alloy and Zr-rich $Cu_{48.4}Zr_{51.6}$ alloy, respectively. The $M_s$ temperature of $Cu_{49.9}Zr_{50.1}$ was $156^{\circ}C$ but those of $Cu_{52.5}Zr_{47.5}$ and $Cu_{48.4}Zr_{51.6}$ alloys, being $109^{\circ}C$ and $138^{\circ}C$, were lower than that of equiatomic $Cu_{49.9}Zr_{50.1}$ alloy. In all the alloys, the $M_s$ temperature has fallen but the $A_s$ temperature has risen, resulting in widening of the transformation hysteresis with thermal cycling. The anomalous characteristics in the transformation temperature are due to the presence of the intermetallic compounds i.e. $Cu_{10}Zr_7$ and $CuZr_2$ formed by an eutectoid reaction during thermal cycling in the temperature range between $-100^{\circ}C$ < $T_c$ < $400^{\circ}C$.

• The Korean Journal of Community Living Science
• /
• v.27 no.1
• /
• pp.49-65
• /
• 2016

This study explores the effects of rural migrant characteristics and conjugal communication on life satisfaction of baby boomer rural migrants. A total of 205 Korean baby boomers, who are living in rural areas in the year of 2013 that had migrated from cities back in 2003 with their families, were analyzed. Their age ranged from 49 to 57 years. The statistical methods used for data analysis were descriptive statistics, t-test, and hierarchical regression analysis, with SPSS Win 20.0 program. The results of this study are summarized as follows: the reasons these baby boomers chose a rural lifestyle were 'for life after retirement,' 'because rural life is good,' 'for health reasons,' and 'for chosen profession.' The level of conjugal communication (M=3.69) and life satisfaction (M=3.23) were higher than average (M=3.0). The variables influencing life satisfaction of baby boomer rural migrants were 'increased property size,' 'better conjugal communication,' 'better health condition,' 'lower levels of money,' and 'length of time spent farming.' Furthermore, in terms of life satisfaction, the relative contributions of these variables are as follows: general characteristics 20%, rural migrant characteristics 10%, and the level of conjugal communication 6%. These results show that conjugal communication is a very important variable, as well as a rural migrant characteristic when it comes to life satisfaction of these baby boomers. Therefore, to improve life satisfaction of baby boomer rural migrants, support programs need to focus on both farming and conjugal relationships.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.3
• /
• pp.385-392
• /
• 2016

Seasonal variability in the algal community structure of intertidal zones was examined at six study sites in Marine National Parks, on the western and southern coasts of Korea from March to November 2015. A total of 193 species of algae, comprising 27 green, 40 brown and 126 red algae, were identified. Algal biomass averaged 101.50 g dry wt./m² with a maximal at Tonggae (168.12 g dry wt./m²) and minimum at Haseom (54.49 g dry wt./m²). The dominant seaweeds by biomass were Sargassum thunbergii at five sites (Tonggae, Haseom, Namdongri, Ando amd Sinjeonri), and S. fusiforme at Soando. Community indices measured as follows: dominance index (DI), 0.31–0.69; richness index (R), 7.30–11.43; evenness index (J'), 0.33–0.49; and diversity index (H'), 1.15–1.86. As evaluated using community indices and environmental states, the EEI (Ecological Evaluation Index) of the Marine National Park was “normal”. The present results indicate that seaweed community structures and indices could be used to evaluate the environmental status of coastal ecosystems.