• Title/Summary/Keyword: M3K

Search Result 53,923, Processing Time 0.095 seconds

Effect of Lipid Constituents on the Amylograph Characteristics of Barley Flour (지방질성분(脂肪質成分)이 보리가루의 Amylograph특성(特性)에 미치는 영향)

  • Choi, In-Sook;Lee, Su-Rae
    • Korean Journal of Food Science and Technology
    • /
    • v.16 no.1
    • /
    • pp.99-107
    • /
    • 1984
  • Naked barley flour(Baekdong cultivar) was examined with respect to its pasting properties by means of Brabender amylograph after adding barley lipids, fatty acids, vegetable oils and emulsifiers at 1% level. Amylogram of barley flour showed a similar gelatinization temperature but higher paste viscosities at all reference points as compared with wheat flour. Barley flour showed lower amylograph curves by defatting with n-hexane, namely reductions in initial gelatinization point, maximum viscosity and setback value. But re-addition of n-hexane extract to the defatted flour essentially reproduced the curve obtained in the undefatted flour. Addition of polar and nonpolar lipids exhibited different effects on the pasting properties of barley flour. Polar lipids generally increased maximum viscosity a little while non-polar lipids increased the maximum viscosity substantially. Addition of increasing amounts of nonpolar lipids was found to progressively increase the maximum viscosity. Addition of fatty acids increaed th maximum viscosity and delayed the peak time. The maximum viscosity of defatted barley flour impregnated with unsaturated fatty acids was higher than that of defatted barley flour impregnated with saturated fatty acids Increasing amounts of linoleic acid were fount to progressively increase the maximum viscosity and to delay the peak time of defatted barley flour. Addition of six vegetable oils lowered the gelatinization temperature and rasied the maximum viscosity and temperature at maximum viscosity. Addition of increasing amount of peanut oil was found to decrease the maximum viscosity. The effect of emulsifiers was greater in undefatted flour than in defatted flour. The maximum viscosity of defatted flour was slightly affected by Methocel 50, Methocel 1500 and Emulthin, and substantially increased by Methocel 4000, sodium polyacrylate and calcium stearyl lactylate.

  • PDF

Antioxidant Activity of Different Parts of Lespedeza bicolor and Isolation of Antioxidant Compound (싸리나무(Lespedeza bicolor) 부위별 추출물의 항산화 활성 및 항산화물질 분리)

  • Lee, Jae-Hak;Jhoo, Jin-Woo
    • Korean Journal of Food Science and Technology
    • /
    • v.44 no.6
    • /
    • pp.763-771
    • /
    • 2012
  • In this study, total antioxidant properties of extracts from different parts of Lespedeza bicolor were determined using techniques of measuring 1,1-diphenyl-2-picryl hydrazyl/2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)-radical scavenging activity and total phenolic contents. The total antioxidant activities of leaf, stem and root extracts from various solvents (water, 50, 70, 100% ethanol, and hot-water) indicated that 50 and 70% ethanol extracts have high radical scavenging activities and phenolic contents. A systematic approach was used to determine the total antioxidant activity of different solvent fractions of the Lespedeza bicolor extracts, partitioning with chloroform, ethyl acetate, n-butanol, and water, and the ethyl acetate fraction was found to have the strongest antioxidant activity. Antioxidant assay-guided isolation was carried out to isolate potential antioxidant compounds. The ethyl acetate fraction of the leaf extract was subjected to silica gel, LH-20 and RP-18 column chromatography successively, and afforded compound 1, which was identified as eriodictyol by NMR and MS analysis, after which its antioxidant activity was determined.

Reproductive Growth of Seeds and Overwintered Stump of Bulrush (Scirpus juncoides Roxb.) (올챙고랭이(Scirpus juncoides Roxb.) 종실(種實) 및 월동주기부(越冬株基部)의 번식생장(繁殖生長)에 관한 연구(硏究))

  • Huh, S.M.;Guh, J.O.
    • Korean Journal of Weed Science
    • /
    • v.7 no.1
    • /
    • pp.35-44
    • /
    • 1987
  • Differing in water conditions, the dry matter weight per plant was highest at 0 cm flooding depth, and was decreased at above 2 cm flooding depths. The shoot and spikes per pot developed best at flooding depths of 0 and 2 cm, but worst at -5cm or above 4cm flooding depths. The dry matter weight of shoots was linearly increased, but the weight of roots was sharply decreased according to high temperature after flower initation. The shoots and spikes per pot developed more effectively at 25$^{\circ}C$ than at 35 or 15$^{\circ}C$. The number of shoot and spike per pot were decreased according to higher shading. The effects of shading of 25-45% were not significantly small. The natural white and yellow spectra were the most effective to increase dry matter weight, shoots and spikes per pot. The dry matter weights of shoot and root per plant were not significantly different among at: 50 and 75% clay. The number of shoots were best and continuously increased at 75% clay, and the increments at 0 and 100% clays showed the lag period at early stage. The pattern of spikes was similar to shoots with less difference in various clay composition. The dry matter weight per plant in paddy field and upland field was basically similar. The numbers of shoot and spike were increased in response to increased fertilizer levels up to 20Kg per 10a of each component.

  • PDF

Regrowth of Bulrush (Scripus juncoides Roxb.) by Seasonal Mowing (올챙고랭이(Scirpus juncoides Roxb.)의 예취(刈取)에 따른 재생력(再生力)에 관한 연구(硏究))

  • Huh, S.M.;Guh, J.O.
    • Korean Journal of Weed Science
    • /
    • v.7 no.1
    • /
    • pp.29-34
    • /
    • 1987
  • The number of regrown shoots per plant for 2 weeks after mowing sharply increased in response to late mowing until June 6, and then the increments were slow. The number of regrown shoots for July 30 were many with early mowing until May 14, and then the numbers were rapidly decreased. The plant height regrown for 2 weeks after mowing was increased until May 14, and then decreased. The plant height regrown for July 30 was not sensitive to mowing time and the development was linearly shown. The fresh weight regrown for July 30 was only increased by late mowing. The regrowth rate of shoots for 2 weeks after mowing was much higher than untreated control and the ratio was decreased with late mowing and the ratio to untreated for control for July 30 was decreased up to 50% by late mowing. The regrowth rate of plant height for 2 weeks after mowing was rapidly decreased, but slowly decreased for July 30 mowing. The regrowth rate of fresh weight was higher until May 22, and then rapidly decreased by late mowing. The decreasing tendency for 2 weeks after mowing was more prominent them for July 30. The annual regrowth rates in shoots and plant height were slowly decreased, but the decreasing rate in fresh weight was rapidly done until May 15, and then decrement became up to 30% by late mowing.

  • PDF

Aeromagnetic Interpretation of the Southern and Western Offshore Korea (한국 서남근해에 대한 항공자력탐사 해석)

  • Baag Czango;Baag Chang-Eob
    • The Korean Journal of Petroleum Geology
    • /
    • v.2 no.2 s.3
    • /
    • pp.51-57
    • /
    • 1994
  • Analysis of the aeromagnetic data aquired by US Navy in the year 1969 permits us to predict a new sedimentary basin, Heugsan Basin, south of the known Gunsan Basin in Block Ⅱ. The basin appears to consist of three sub-basins trending NNW-SSE. The results of our analysis provide not only an independent assessment of the Gunsan Basin, but also new important information on the tectonic origin and mechanism for the two basins as well as for the entire region. The basin forming tectonic style is interpreted as rhombochasm associated with double overstepped left-lateral wrench faults. From the magnetic evidence, a few NE-SW trending major onshore faults are extended to the study area. We also interpreted the nature of the faults to be left-lateral wrenches. This new gross structural style is consistent with the results of recent Yeongdong Basin analysis by Lee. The senses of fault movement are also supported by the paleomagnetic evidence that the Philippine Sea had experienced an 80-degree clockwise rotation since the Eocene. Based on a 2 $\frac{1}{2}$ model study the probable maximum thickness of the sediments in the Gunsan Basin is approximately 7500 meters. We believe that the new Heugsan Basin was left unidentified because a high velocity layer may be overlying the basin. Because the overall structural configuration of the Heugsan Basin appears to be favorable for hydrocarbon accumulation, a detailed airborne magnetic survey is recommended in the area in order to verify the magnetic expression of this thick basin. A detailed subsequent marine gravity survey is also recommended in order to delineate the sedimentary section and to acquire supplemental data to the magnetic method only if an overlying high velocity layer is confirmed. Otherwise a high energy source seismic survey may be more effective.

  • PDF

Effect of the Combination of Co-Culture System and Supplemented Protein Sources on the In Vitro Development of Bovine IVF Embryos (각종 공동배양 배지와 첨가 단백질원의 조합이 소 체외수정란의 체외배양에 미치는 영향)

  • Cheong, H.T.;Lee, J.H.;Park, C.K.;Yang, B.K.;Kim, C.I.
    • Korean Journal of Animal Reproduction
    • /
    • v.23 no.4
    • /
    • pp.337-345
    • /
    • 1999
  • The present study was conducted to investigate the effects of various co-culture systems and supplemented protein sources on the in vitro development of bovine IVF embryos. Bovine cumulus oocyte complexes (COCs) were matured and fertilized in vitro. Presumptive zygotes with cumulus cells were transferred to TCM-199 or CRlaa containing 10% FBS or 3mg/$m\ell$ BSA, and cultured for 36~40 hr. After primary culture, cleaved embryos were co-cultured with cumulus cells(CC), bovine oviduct epithelial cells(BOEC) or Buffalo rat liver cells (BRLC) in TCM-199 or CRlaa supplemented with FBS or BSA respectively, for further 6 days. Cleavage rate increased with BSA(P<0.01) in the both TCM-199(79%) or CRlaa(74%) When embryos were co-cultured with CC or BOEC in TCM-199, blastocyst development was enhanced with BSA(40% and 43%) compared to FBS (22% and 29%) , whereas in CRlaa no difference observed between BSA(40% and 39%) and FBS (40% and 42%). When embryos were co-cultured with BRLC monolayer, FBS enhanced the blastocyst development (P<0.05) compared to BSA in both TCM-199(41% vs 31%) and CRlaa (44% vs 37%). The result of the present study showed that the cleavage rate of bovine IVF embryos increased with BSA, The result also showed that BSA can enhance the development of IVF embryos in co-culture with CC or BOEC in TCM-199, suggesting the in vitro development is affected by the medium and supplemented protein sources in co-culture with somatic cells.

  • PDF

Cultural Characteristics and Artificial Cultivation of Edible Mushroom, Clitocybe maxima (흰깔대기버섯의 배양적 특성 및 인공재배에 관한 연구)

  • Kim, M.K.;Kim, D.U.;Kang, H.W.;Seo, G.S.
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.20 no.1
    • /
    • pp.35-47
    • /
    • 2018
  • A edible mushroom, Clitocybe maxima (Lentinus giganteusis) commercially cultivated in China and Taiwan. However, the researches of cultivation and cultural characteristics were not reported in Korea. In this study, we conducted on cultural characteristics and artificial cultivation of C. maxima. Six isolates were collected from China(3 isolates, commercial strain), Taiwan(1 isolate, commercial strain) and Korea(2 isolates, wild type). C. maxima and L. giganteus collected in China and Taiwan, respectively, are the same in China and are estimated to be of the same species as cultured characteristics. The mycelial growth of the collected strains was not significantly different in agar medium but it showed the best growth in YPMG in liquid culture. Optimum temperature for mycelial growth and induction of fruit body were 25℃ and 30℃, respectively. In order to artificial cultivation of C. maxima, cultural characteristics and artificial cultivation were carried out using agricultural by-products and forestry by-products materials. Mycelial growth was suitable in rice straw, cottonwood sawdust, corncob and rice seed medium, and it was selected as a cultivation medium. The suitable medium for artificial cultivation of C. maxima was selected to mixed medium 2(compounding ratio(v/v): 55% of hardwood sawdust, 5% of cottonseed pellets, 10% of cottonseed, 15% of beet pulp, 15% of swollen rice husks). It took about 30 days to be able to harvest, it was faster than oyster mushrooms. The cultivation period was about 30days. A isolate, CMA-002 was not initiation to fruit body primordiuma on the used cultivation substrate. Other 5 isolates were initiate and development to fruit body on the substrate used in this study. The strain CMA-003 was initiated to be fruiting body by 8~10 days after induction of fruiting body in all of the substrates. Isolate CMA-003 was generate to a bundle fruit body. Other isolates, however, were form fruit body individually. The CMA-003 strain was likely highly recommendable strains for farming. The optimum conditions for the induction and growth of C. maxima fruit body were 25~30℃, 8 hr illumination per day with white fluorescent lamp, 90~95% relative humidity, and 1,500 ppm of CO2 concentration in a cultivation room.

Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines (정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구)

  • No, Sang-Ha
    • Journal of Biosystems Engineering
    • /
    • v.1 no.1
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

Study on the Long-term Forecasting of Brown Planthopper Outbreaks (벼멸구 발생의 장기예찰을 위한 기초적 연구)

  • Paik Woon Hah;Paik Hyun Joon
    • Korean journal of applied entomology
    • /
    • v.16 no.3 s.32
    • /
    • pp.171-179
    • /
    • 1977
  • Since the outbreak of the brown planthopper (Nilaparvata lugens) in 1915 caused tremendous losses in rice production, one of the more effective method of prevention of such a disaster could be the establishment of longterm forecasting system, In 1916 the author indicated there was a correlation between sunspot activities and brown planthopper and the white back planthopper outbreaks. However, the examples seem to be too small size to state a definite correlation. The purpose of the present study IS to revi~w the history of the brown planthopper outbreaks, and to establish a more effective forcasting system. The present forcasting methods are based on light trap catches of adults which already migrate into this country from mainland China. The regular cycle of 11.2 years of sunspot activity began in 1710, and was continued to present. To gather more records of brown planthopper, the author checked 'Joseon Wangjo Silrok' and analized the so-called 'Hwang' 'Hwang-chung' and 'Chung' which have multiple meanings, together with 'Samguk Sagi' 'Goryo Sa' and 'Munheon Bigo.' The results obtained by the about from review of these old literature citations revealed that ten species of insect and unknown species were involved: i. e., pine moth (Dendrolimus spectabilis), army worm (Mythimna separata), brown planthopper (Nilarvata lugens), white-back planthopper (Sogatella furcifera), migratory locust (Locutsa migratoria), rice stem borer (Chilo suppressalis,), mole cricket (Gryllotalpa africana), rice-plant weevil (Echinocnemus squameus), cut worm (Euxoa segetum), and mulberry pyralid Margaronia pyloalis) The suspected incidence of planthopper in old records expressed by 'Hwang' or 'Chung' revealed a total or 25 out of 37 in 'Samguk sagi,' 21 out of 49 in 'Goryo sa,' 9 of 73 in 'Wanjo-silrog,' and none of 8 in 'Munheon bigo' were planthoppers. Therefore, a total of 36 out of 167 records of insect incidence in the old literature can be possibly attributed to planthoppers. The brown planthopper and white-back planthopper migrate together to Korea every year from mainland China, However, the number of each species are differ by year. In 1975 outbreak the brown planthopper was dominant; and the white-back planthopper prevailed in 1946 and 1977 outbreaks, During the course of this study, the author was able to add a new record of outbreak of planthop per. In 1916 the white-back planthopper outbreak caused serious losses in Chungcheong-namdo and Jeonla-namdo, with losses estimated as high as 160 and 190 thousand seok (23.2 and 27.5 thousand M/T), in Naju and Secheon county, respectively. Since 1912, major outbreaks of brown planthopper or white-back planthopper have been recored 5 times. These occurrences coincide and well matched the period of minimum number of sunspots, With these authenticated records of planthoppers, the author believes there is a close correlation between brown planthopper and white-back planthopper outbreaks in Korea and sunspot activities. Therefore, in years of low number of sunspots, we should watch for and expect outbreaks of these. insects. At this time, it will be necessary to provide all possible prevention measures.

  • PDF

Territorial Expansion the King Võ (Võ Vương, 1738-1765) in the Mekong Delta: Variation of Tám Thực Chi Kế (strategy of silkworm nibbling) and Dĩ Man Công Man (to strike barbarians by barbarians) in the Way to Build a New World Order (무왕(武王, 1738-1765) 시기 메콩 델타에서의 영토 확장 추이: 제국으로 가는 길, '잠식지계(蠶食之計)'와 '이만공만(以蠻攻蠻)'의 변주)

  • CHOI, Byung Wook
    • The Southeast Asian review
    • /
    • v.27 no.2
    • /
    • pp.37-76
    • /
    • 2017
  • $Nguy{\tilde{\hat{e}}}n$ Cư Trinh has two faces in the history of territorial expansion of Vietnam into the Mekong delta. One is his heroic contribution to the $Nguy{\tilde{\hat{e}}}n$ family gaining control over the large part of the Mekong delta. The other is his role to make the eyes of readers of Vietnamese history be fixed only to the present territory of Vietnam. To the readers, $Nguy{\tilde{\hat{e}}}n$ Cư Trinh's achievement of territorial expansion was the final stage of the nam $ti{\acute{\hat{e}}n$ of Vietnam. In fact, however, his achievement was partial. This study pays attention to the King $V{\tilde{o}}$ instead of $Nguy{\tilde{\hat{e}}}n$ Cư Trinh in the history of the territorial expansion in the Mekong delta. King's goal was more ambitious. And the ambition was propelled by his dream to build a new world, and its order, in which his new capital, $Ph{\acute{u}}$ $Xu{\hat{a}}n$ was to be the center with his status as an emperor. To improve my assertion, three elements were examined in this article. First is the nature of $V{\tilde{o}}$ Vương's new kingship. Second is the preparation and the background of the military operation in the Mekong Delta. The nature of the new territory is the third element of the discussion. In 1744, six years after this ascending to the throne, $V{\tilde{o}}$ Vương declared he was a king. Author points out this event as the departure of the southern kingdom from the traditional dynasties based on the Red River delta. Besides, the government system, northern custom and way of dressings were abandoned and new southern modes were adopted. $V{\tilde{o}}$ Vương had enough tributary kingdoms such as Cambodia, Champa, Thủy $X{\tilde{a}}$, Hoả $X{\tilde{a}}$, Vạn Tượng, and Nam Chưởng. Compared with the $L{\hat{e}}$ empire, the number of the tributary kingdoms was higher and the number was equivalent to that of the Đại Nam empire of the 19th century. In reality, author claims, the King $V{\tilde{o}}^{\prime}s$ real intention was to become an emperor. Though he failed in using the title of emperor, he distinguished himself by claiming himself as the Heaven King, $Thi{\hat{e}}n$ Vương. Cambodian king's attack on the thousands of Cham ethnics in Cambodian territory was an enough reason to the King $V{\tilde{o}}^{\prime}s$ military intervention. He considered these Cham men and women as his amicable subjects, and he saw them a branch of the Cham communities in his realm. He declared war against Cambodia in 1750. At the same time he sent a lengthy letter to the Siamese king claiming that the Cambodia was his exclusive tributary kingdom. Before he launched a fatal strike on the Mekong delta which had been the southern part of Cambodia, $V{\tilde{o}}$ Vương renovated his capital $Ph{\acute{u}}$ $Xu{\hat{a}}n$ to the level of the new center of power equivalent to that of empire for his sake. Inflation, famine, economic distortion were also the features of this time. But this study pays attention more to the active policy of the King $V{\tilde{o}}$ as an empire builder than to the economic situation that has been told as the main reason for King $V{\tilde{o}}^{\prime}s$ annexation of the large part of the Mekong delta. From the year of 1754, by the initiative of $Nguy{\tilde{\hat{e}}}n$ Cư Trinh, almost whole region of the Mekong delta within the current border line was incorporated into the territory of $V{\tilde{o}}$ Vương within three years, though the intention of the king was to extend his land to the right side of the Mekong Basin beyond the current border such as Kampong Cham, Prey Vieng, and Svai Rieng. The main reason was $V{\tilde{o}}$ Vương's need to expand his territory to be matched with that of his potential empire with the large number of the tributary kingdoms. King $V{\tilde{o}}^{\prime}s$ strategy was the variation of 'silkworm nibbling' and 'to strike barbarians by barbarians.' He ate the land of Lower Cambodia, the region of the Mekong delta step by step as silkworm nibbles mulberry leave(general meaning of $t{\acute{a}}m$ thực), but his final goal was to eat all(another meaning of $t{\acute{a}}m$ thực) the part of the Mekong delta including the three provinces of Cambodia mentioned above. He used Cham to strike Cambodian in the process of getting land from Long An area to $Ch{\hat{a}}u$ Đốc. This is a faithful application of the Dĩ Man $C{\hat{o}}ng$ Man (to strike barbarians by barbarians). In addition he used Chinese refugees led by the Mạc family or their quasi kingdom to gain land in the region of $H{\grave{a}}$ $Ti{\hat{e}}n$ and its environs from the hand of Cambodian king. This is another application of Dĩ Man $C{\hat{o}}ng$ Man. In sum, author claims a new way of looking at the origin of the imperial world order which emerged during the first half of the 19th century. It was not the result of the long history of Đại Việt empires based on the Red River delta, but the succession of the King $V{\tilde{o}}^{\prime}s$ new world based on $Ph{\acute{u}}$ $Xu{\hat{a}}n$. The same ways of Dĩ Man $C{\hat{o}}ng$ Man and $T{\acute{a}}m$ Thực Chi $K{\acute{\hat{e}}}$ were still used by $V{\tilde{o}}^{\prime}s$ descendents. His grandson Gia Long used man such as Thai, Khmer, Lao, Chinese, and European to win another man the '$T{\hat{a}}y$ Sơn bandits' that included many of Chinese pirates, Cham, and other mountain peoples. His great grand son Minh Mạng constructed a splendid empire. At the same time, however, Minh Mạng kept expanding the size of his empire by eating all the part of Cambodia and Cham territories.