• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.24-45
• /
• 2012

In this paper, we present a survey of security and privacy preserving issues in M2M communications in Cyber-Physical Systems. First, we discuss the security challenges in M2M communications in wireless networks of Cyber-Physical Systems and outline the constraints, attack issues, and a set of challenges that need to be addressed for building secure Cyber-Physical Systems. Then, a secure architecture suitable for Cyber-Physical Systems is proposed to cope with these security issues. Eventually, the corresponding countermeasures to the security issues are discussed from four aspects: access control, intrusion detection, authentication and privacy preserving, respectively. Along the way we highlight the advantages and disadvantages of various existing security schemes and further compare and evaluate these schemes from each of these four aspects. We also point out the open research issues in each subarea and conclude with possible future research directions on security in Cyber-Physical Systems. It is believed that once these challenges are surmounted, applications with intrinsic security considerations will become immediately realizable.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.147-161
• /
• 2012

In recent years, machine-to-machine (M2M) communications are under rapid development to meet the fast-increasing requirements of multi-type wireless services and applications. In order to satisfy M2M communications requirements, heterogeneous networks convergence appears in many areas, i.e., mobile cellular networks (MCNs) and wireless sensor networks (WSNs) are evolving from heterogeneous to converged. In this paper, we introduce the system architecture and application requirement for converged MCN and WSN, where mobile terminals in MCN are acting as both sensor nodes and gateways for WSN. And then, we discuss the joint optimization of converged networks for M2M communications. Finally, we discuss the technical challenges in the converged process of MCN and WSN.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.8 no.2
• /
• pp.21-28
• /
• 2008

The main purpose of this paper is to find the phase-in of BIM adoption by focusing on the level of integration. BlM should be aimed at integration and collaboration of all parties furnishing design and construction services to increase the productivity. Therefore, the degree and depth of integration for project collaboration is very important to BlM design process. One of the key advantages of full integration is that is to facilitates the development of detailed information much earlier in the entire design process to improve collaboration among stakeholders. Such integrated use is the ultimate method, but even so, it's not the precondition of BlM. One of the key advantages of relatively low integration as a transition phase is to adopt the BlM earlier than full integration. Such transitional and non-integrated BIM can also reduce the possibility of trial and error in BlM adoption. Therefore, this paper focused on non-integrated use of BlM as a substitute of full IPD by analyzing obstacles in BIM adoption.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.633-637
• /
• 2005

In this contribution, we developed and improved an existing GF (Galois field) dividing algorithm by suggesting a novel architecture for a finite field divider, which is frequently required for the error correction applications and the security-related applications such as the Reed-Solomon code, elliptic curve encryption/ decryption, is proposed. We utilized the VHDL language to verify the design methodology, and implemented the architecture on an FPGA chip. We suggested the n-bit lookup table method to obtain the throughput of 2m/n cycles, where m is the order of the division polynomial and n is the number of the most significant lookup-bits. By doing this, we extracted the advantages in achieving both high-throughput and less cost of the gate areaon the chip. A pilot FPGA chip was implemented with the case of m=4, n=2. We successfully utilized the Altera's EP20K30ETC144-1 to exhibit the maximum operating clock frequency of 77 MHz.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.1
• /
• pp.105-113
• /
• 1994

This paper introduces the Parallel Advanced Loosely coupled Multiprocessor (PALM) architecture, which is based on HCH(m,p), where m is number of links per a communication processor (CP) and p is the number of application processors (APs) connected to the CP. communication links between a pair of CPs and/or between a CP and an AP, are made of dual-Port RAMs, which provide fast and reliable word-parallel communication between processors. Among the wide spectrum of HCH networks, HCH(m,2) is also known to be a cost optimal topology, such that HCH(m,2) consists of the largest number of APs retaining the minimal number of CPs and communication links. We also implement a testbed based on HCH(2,2). The experiment result shows that the small communication/computation ratio of the PALM system would realize fine-grain parallelism on message-passing MIMD systems.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.231-234
• /
• 2007

Advances in white OLED tandem architecture are discussed.With these structures, stable and low-power full color AMOLED displays can be fabricated that are anticipated to be suitable for large area applications such as TVs. With a tandem architecture, efficient (24 cd/A) OLED structures with exceptional stability (${\sim}100,000\;h$ at $1000\;cd/m^2$) are described. In addition, excellent color gamut (>100% NTSC) can be attained by incorporating advanced color filters into the AMOLED backplane in a typical bottom-emitting configuration.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.140-146
• /
• 2013

This experiment was conducted in order to study the physiological characteristics of Sedum takevimense in different moisture conditions. The photosynthetic rate, water use efficiency and the respiratory rate were determined by using a photable photosynthesis system. According to the results, the best illumination range and moisture range were explicitly selected. The highest photosynthetic rate was at $600{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, and after this value, the trend showed a reduction. When the moisture was 11.31%, the photosynthetic capacity and water use efficiency reached maximum value, but the respiratory rate reached maximum value at 7.91%. According to the measured values, the best illumination range was $600{\sim}1,200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and the best moisture range was 7.09~11.31%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.1-15
• /
• 2019

Internet of Things (IoT) is commonly referred to as a future internet technology to provide advanced services by interconnecting physical and virtual things, collecting and using many data from them. The IoT platform is a server platform with a common architecture to collect and share the data independent of the IoT devices and services. Recently, oneM2M, the global standards initiative for Machine-to-Machine (M2M) communications and the IoT announced the availability of oneM2M Release 2 specifications. Accordingly, this paper presents a new oneM2M-compliant IoT platform called Mobius 2.0 and proposes its application to collect the biosignal data from wearable IoT devices for emotion recognition. Experimental results show that we can collect various biosignal data seamlessly and extract meaningful features from the biosignal data to recognize two emotions of joy and sadness.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.3
• /
• pp.33-39
• /
• 2011

The purpose of this study is to present the raw data for establishing the conservation and restoration trail about Wolseong by objective and systematical trail deterioration in Wolseong as UNESCO, world heritage site, Gyeongju-si, Korea. To accomplish the purpose, not only trail condition such as altitude, entire width, bare width, maximum depth and slope of trail, but also deterioration types of trail were surveyed at the total 97 points for 2.145km in length on the 11 access trails to Wolseong. Major deterioration types of trail were root exposure(48%), rock exposure(40%), trail deeping(9%) in order of frequency. To grasp the deterioration condition of the trail, assessment on impact rating class of trail that the 11 access trail were investigated. Putting these results together informs us that the deterioration condition of the trail in Wolseong is reached the level of grave concern yet, prompt countermeasure to maintain the existing condition has to be considered with regard for the conditions of location and the containing amounts of use.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.3
• /
• pp.1-17
• /
• 2004

The focus of this study is the promotion of green area volumes and their naturalness, water circulation system, decline of entropy, creation of biological habitats and linkage of separated urban green space. Re-presentative urban biotope survey sites were categorized as urban biotope, semi-natural biotope, and natural forest. In the urban biotope, a residential biotope was constructed near the Han river and in mountain areas. The green-area ratio at the housing complex was about 25%. GVZ(Grunvolumenzahl) was 0.35m$^3$/m$^2$ at the 5∼10-story housing complex, and 1.53m$^3$/m$^2$ over the 11-story. As for the green-area structure of the housing complex, canopy layer, understory layer, and shrub layer were not differentiated and the green-area volume was not high enough. The green-area ratio of school areas as a public area biotope was 5∼20%. GVZ was 1.12m$^3$/m$^2$ at Myungduk High School, and 1.78m$^3$/m$^2$ at Jeonggok Elementary School. In order to convert the urban biotope into an ecological area, green areas around the buildings should be connected to urban buffer green areas, and multi-layer structures should be established with natural plant species. In the semi-natural biotope, neighbor parks were created park in the vicinity of the natural forests. GVZ was 0.28m$^3$/m$^2$, and plantation was established with single layer structure and was definitely insufficient for the area. The urban buffer green areas have been established in strip corridors with the width of 20∼123m. In those areas, GVZ was 0.16∼0.27m$^3$/m$^2$ and had a deficient canopy layer, understory layer, and shrub layer. Soil conditions were not favorable for tree growth. In the natural biotope, GVZ of the plantation was 1.03∼1.5m$^3$/m$^2$ but the high crown closure of this area reduces the chance of species change and succession. GVZ of natural forest was 2.53∼2.57m$^3$/m$^2$. It is desirable to plant diverse plants and the natural forest should be succeeded by broad-leaf deciduous tree species. To improve the value of biotope at Kangseo-Gu, building height needs to be limited to reduce the environmental deterioration in the city. In order to maintain the water circulation system, water-permeable material is recommened when the urban surface areas are paved. The establishment of a water circulation system will improve ground water levels, soil moisture, water quality, and habitats. In order to improve biological diversity, it is desirable to have multi-layer structures in urban green areas with native species.