• 제목/요약/키워드: M2M Device

검색결과 2,298건 처리시간 0.033초

CSS WPAN에서 주파수 편이를 보상하는 확장 Kalman 필터를 사용한 이동노드의 위치추정 방식 (Location Estimation Method using Extended Kalman Filter with Frequency Offsets in CSS WPAN)

  • 남윤석
    • 정보처리학회논문지C
    • /
    • 제19C권4호
    • /
    • pp.239-246
    • /
    • 2012
  • WPAN에서 위치추정은 UWB를 사용한 선택적 기능으로 규격화되어 있다. 그러나 실제로는 위치추정 기능이 제공되고, 가격이 저렴하고 개발환경이 제공되고 있는 CSS(Chirp Spread Spectrum) 소자를 주로 사용하고 있다. CSS 소자는 2.4GHz 주파수 대역을 사용하고, 표본화 클럭 주파수가 UWB에 비하여 낮고, 시각정보추출 정확도가 떨어지므로 거리추정 오차가 크게 나타난다. 거리추정 오차는 SDS-TWR 방식을 사용하여 10m 거리에서 30cm~1m 정도로 알려지고 있으며, ($10m{\times}10m$) 환경에서 위치추정 오차는 1~2m 정도로 알려지고 있다. 따라서 보다 개선된 성능이 요구되는 응용을 위해서는 거리추정 이후의 후처리 알고리즘 개발이 중요하게 되었다. 본 논문에서는 고정노드의 주파수편이를 확장 Kalman 필터에 적용하는 방식을 연구하였으며, 각 고정노드의 주파수 편이를 공통의 상태변수와 각 고정노드별 주파수편이 상수로 구분하고 이를 통합하는 주파수편이 보상 확장 Kalman 필터 방식을 제안하였다. 제안된 방식은 CSS WPAN 노드를 사용하여 10cm 이하로 매우 정확한 위치오차 범위 내에서도 이동노드의 위치를 추정할 수 있음을 확인하였다.

강우유출수의 침투시 부하저감을 위한 경사관 침전장치의 효율평가 (Evaluation of Particle Removal Rate in Inclined-pipe Settling System for Stormwater Infiltration)

  • 김상래;김동근;문정수;한무영
    • 상하수도학회지
    • /
    • 제23권6호
    • /
    • pp.719-726
    • /
    • 2009
  • One of the alternative runoff management measures is on-site runoff mitigation, such as rainwater retention tank and infiltration facilities especially the latter that is possible to manage simultaneously runoff quality and quantity as a perspective of water-cycle. This study was conducted to develop a particle separator, inclined-pipe settling system, that could improve particle removal efficiency of road runoff as a pre-treatment device of stormwater infiltration. Solid particles larger than $100{\mu}m$ are separated by simple sedimentation; however, the significant amount of pollutants with a diameter less than $100{\mu}m$ remain in suspension. Without any treatment in that case of the runoff into infiltrate, groundwater would be deteriorated and also infiltration rate would be decreased by clogging. Therefore, we suggest optimal design parameters (inclined angle, pipe length, and surface loading rate) of inclined-pipe settling system which can be designed to effectively remove particles diameter smaller then $70{\mu}m$. Thus, the results showed TSS removal efficiency more than 80% with a particle diameter between $20{\mu}m$ and $70{\mu}m$, 100% above particle diameter $70{\mu}m$ for the inflow rate $0.018 m^3/m^2{\cdot}hr$ with pipe inclined at angle $15^{\circ}$.

자외선(紫外線) 공기(空氣) 청정기(淸淨機)의 냉장고(冷藏庫) 살균(殺菌) 탈취(脫臭) 효과(效果) (Sterilizing and Deodorizing Effect of UV-Ray Air Cleaner for Refrigerator)

  • 전재근;이영진;김경만;이홍원;장의영
    • 한국식품과학회지
    • /
    • 제25권2호
    • /
    • pp.174-177
    • /
    • 1993
  • 소형 밀폐공간(48 liter)과 가정용냉장고(330, 450 liter)에서 살균 및 탈취효과를 가진 자외선공기청정기를 설계, 제작하였다. 자외선램프의 자외선강도는 $2.38\;mW/cm^2$이며 강도증폭을 위하여 내부에 반사판을 설치하였다. 자외선에 의한 오존발생량은 $25^{\circ}C$ 에서는 0.08 ppm, $3^{\circ}C$ 에서는 0.06 ppm이었다. 본 장치를 사용하여 부유균에 대한 살균율은 공간(48 liter)에서는 12시간 가동 후 78.9%, 가정용냉장고에서는 80%을 보였다. 동장치는 $25^{\circ}C$에서 전기 방전식 오존탈취기에 비하여 2.5배, $3^{\circ}C$에서 2배의 탈취력을 보였다. 김치 냄새의 주요성분인 methyl mercaptan에 대한 탈취력은 $3^{\circ}C$에서 3배 이상이었다.

  • PDF

Use of Self Assembled Monolayer in the Cathode/Organic Interface of Organic Light Emitting Devices for Enhancement of Electron Injection

  • Manna, U.;Kim, H.M.;Gowtham, M.;Yi, J.;Sohn, Sun-young;Jung, Dong-Geun
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.1343-1346
    • /
    • 2005
  • Self assembled monolayers (SAM) are generally used at the anode/organic interface to enhance the carrier injection in organic light emitting devices, which improves the electroluminescence performance of organic devices. This paper reports the use of SAM of 1-decanethiol (H-S(CH2)9CH3) at the cathode/organic interface to enhance the electron injection process for organic light emitting devices. Aluminum (Al), tris-(8-hydroxyquionoline) aluminum (Alq3), N,N'-diphenyl-N,N'-bis(3 -methylphenyl)-1,1'- diphenyl-4,4'-diamine (TPD) and indium-tin-oxide (ITO) were used as bottom cathode, an emitting layer (EML), a hole-transporting layer (HTL) and a top anode, respectively. The results of the capacitancevoltage (C-V), current density -voltage (J-V) and brightness-voltage (B-V), luminance and quantum efficiency measurements show a considerable improvement of the device performance. The dipole moment associated with the SAM layer decreases the electron schottky barrier between the Al and the organic interface, which enhances the electron injection into the organic layer from Al cathode and a considerable improvement of the device performance is observed. The turn-on voltage of the fabricated device with SAM layer was reduced by 6V, the brightness of the device was increased by 5 times and the external quantum efficiency is increased by 0.051%.

  • PDF

고속철도 터널에서의 미기압파 저감을 위한 모형실험 (The High-speed train model for reducing the micro-pressure wave in railway tunnel)

  • 장용준;박원희;김승태
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.1330-1336
    • /
    • 2007
  • 본 연구는 미기압파 해석에 필요한 각종계수의 도출 및 해석결과의 신뢰성을 검증하기 위한 목적이 있다. 본 실험에 사용된 터널 주행 열차모형 실험 장치는 1/60축척으로 제작 되었으며, 열차는 KTX 차량 모델의 제원에 맞추어 10량 1편성으로 제작된 모형을 사용하였다. 터널의 다면적은 $107.9m^3$$95.1m^3$를 적용하고, 터널연장은 1km, 0.78km, 0.5km를 적용하였고, 열차속도는 275, 300, 325, 350km/h로 변화시켜 실험 하였다. 실험 장치는 유압발사 시스템으로 열차모델 유압 발사기터널모델 제동장치로 구성된다. 모형열차의 속도는 터널입구 전방 및 출구 부 갱구에서 각각 1.2m지점에서 설치한 속도 감지기에 의해서 측정되며, 터널 내부의 압력변동은 압력센서를 터널의 입구, 중앙, 출구부에 설치하여 연속적으로 측정 하였다. 측정결과 터널입구에서 발생한 압력파의 압력기울기는 터널을 전파하면서 비선형효과에 의해서 증가하거나 확산작용에 의해서 압력기울기가 감소하는 것을 알 수 있었고, 미기압파 저감 대책을 위해 터널입구에 종류별 각각 설치하여 출구부에서 발생되는 미기압파를 비교분석하여보았다.

  • PDF

비선형성의 개선을 위한 Capacitive pressure sensor의 Touch mode 방식에 대한 유한요소 해석 (Finite Element Analysis of Capacitive pressure sensor with Touch mode for improving non-linearity)

  • 김도형;오재근;최범규
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 C
    • /
    • pp.2087-2089
    • /
    • 2004
  • Capacitive pressure sensor는 Piezo type sensor에 비해 온도의 영향이 적어 공업계측, 전기용품 등 그 용도가 다양하여 폭넓게 사용되어지고 있지만, 측정값의 비선형성이 존재하여 측정값에 대한 신뢰도가 떨어지는 단점이 있다. 본 연구에서는 기존 capacitive pressure sensor의 비선형적 output을 개선하기 위한 방법으로 touch mode capacitive pressure sensor를 제안하였다. 또한, 실제 Device제작에 앞서 FEM 해석을 수행하였다. 2mm X 2mm 크기의 diaphragm, $25{\mu}m$의 두께, $20{\mu}m$의 gap을 갖는 Sensor를 Simulation하였으며 설계 변수를 추출하여 각각의 설계변수에 대한 해석을 실시하였다. 그 결과 15.2psi${\sim}$31psi의 영역에서 8.58pF${\sim}$54.31pF의 capacitance가 선형적으로 나타나는 sensor임을 확인하였다.

  • PDF

형광 Green OLED Device의 Hole Transport layer와 Electron Transport Layer에 따른 특성 변화 분석

  • 김현기;최병덕
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.229.1-229.1
    • /
    • 2016
  • 본 연구에서는 Hole Transporting Layer(HTL)와 Electron Transporting Layer(ETL)의 두께에 의한 특성을 비교해보기 위해서 각각 0, 10, 20 nm로 HTL, ETL 두께를 달리한 형광 OLED소자를 제작하였다. ETL의 두께가 얇아질수록 $V_{TH}$ 값은 2.5V에서 0.9 V로 낮게 나타났고 소자의 전체 두께와 on voltage는 비례한다는 특성을 발견할 수 있었다. HTL과 ETL이 두꺼울수록 각 layer에서 carrier들의 이동에 delay가 생기고 emission layer에서 표면까지 거리가 생기기 때문이다. ETL의 두께가 두꺼울수록 높은 luminance 값을 나타내는 차이를 보여주고 있다. Hole에 비해 이동도가 작은 electron은 emission layer까지 늦게 전달되어, EML내에서 비교적 cathode쪽에 가까운 곳에서 exciton이 형성되기 때문이다. CE에도 더 두꺼운 ETL을 가진 소자가 더 높은 CE값 가짐을 확인할 수 있다. 모든 소자가 $200mA/cm^2$에서 가장 높은 CE값을 나타낸 이유는 $200mA/cm^2$에서 electron-hole 결합이 만들어내는 exciton형성이 가장 많기 때문이다. PE, QE도 ETL 두께가 두꺼울수록 특성을 향상이다. 결론적으로 ETL의 두꺼울수록 current density값이 감소함을 보이고 있는 반면 turn on voltage, luminance, efficiency 증가함을 볼 수 있다.

  • PDF

Surface morphology modification of vertically-aligned carbon nanotubes by water vapor exposure

  • Adil, Hawsawi;Jeong, Goo-Hwan
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.238.2-238.2
    • /
    • 2015
  • Surface modification of vertically-aligned carbon nanotube (VACNT) is essential in order to meet specific demands for particular applications such as field emission displays, heat dissipation device and potential sun energy conversion due to their superior electrical and thermal conductivity and strong light absorption. In this study, we observe the effect of exposure to water vapor on a different lengths of the surfaces of VACNT. The study was conducted on three different lengths of the VACNT: short length around $200{\mu}m$, medium-length around $500{\mu}m$, and high length around 1 mm. Water exposure time ranges between 2-10 min and temperature of the water ranges from 60 to 120 oC. The result of water vapor exposure mainly show that increasing the exposure time and water temperature give rise to increase of the speed of change on the surface of the VACNT. Especially, the shorter VACNT change their surface morphology most rapidly.

  • PDF

유기 전계발광 소자의 최근의 개발동향 (The recent trend of organic electroluminescent devices)

  • 구할본;김주승;조재철
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제9권2호
    • /
    • pp.208-215
    • /
    • 1996
  • 본 고에서는 최근 주목받고 있는 적층형 유기 전계발광소자의 일반적 형태와 발광특성등에 대해 알아보고자 한다. 현재 완전한 유기 전계발광소자의 개발을 위해 캐리어 수송재 즉, 정공수송재와 전자수송계의 캐리어 수송능력을 증가시키기 위해서 여러가지 새로운 물질들이 연구되고 있으며, 고효율의 발광특성을 얻어내기 위한 발광재료의 개발과 동작시의 안정성을 향상시키기 위한 소자구조의 개선에 대해서도 연구가 국내외적으로 활발히 진행되고 있다. 특히, 조만간 일본에서 30cd/m$^{2}$의 휘도를 갖는 적층형 유기 전계발광 소자가 상용화 될것으로 알려져있어 이를 계기로 고휘도, 고효율의 유기 전계발광 소자의 개발이 가까운 시일내에 이루워지리라 전망된다.

  • PDF

새로운 고속월쉬 변환을 이용한 고속의 고조파 신호 측정기 설계 (A design of the Fast Measuring Instrument for Harmonic Signal using New Fast Walsh Transform)

  • 임윤식;유영식
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 학술대회 논문집 전문대학교육위원
    • /
    • pp.141-145
    • /
    • 2007
  • Using the New Fast Walsh Transform algorithm, we present a new algorithm which reduces the computational amount, and it can consequently calculate the real and imaginary components for current and voltage signals of power system in sampling intervals. The calculation amount is reduced to 2X(m-1) at m samples to measure full harmonics using developed algorithm. When in single harmonic measuring, it needs only 2(log2N-1)+1 additions and subtractions. We developed hardware device for testing, and tested the developed algorithm by measuring real and imaginary components.

  • PDF