• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1520-1521
• /
• 2008

There are several ways to demonstrate white organic light emitting diodes (OLEDs) for displays and solid state lighting applications. Among these approaches are the stacked three primary or two complementary colors light-emitting layers, multiple-doped emissive layer, and excimer and exciplex emission [1-10]. We report on white phosphorescent excimer devices by using two light emitting materials based on platinum complexes. These devices showed a peak EQE of 15.7%, with an EQE of 14.5% (17 lm/W) at $500\;cd/m^2$, and a noticeable improvement in both the CIE coordinates (0.381, 0.401) and CRI (81). Devices with the structure ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 12% FPt (10 nm) /26 mCPy: 2% Pt-4 (15 nm)/BCP (40 nm)/CsF/Al [device 1], ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 2% Pt-4 (15 nm)/26 mCPy: 12% FPt (10 nm)/BCP (40 nm)/CsF/Al [device 2], and ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 2% Pt-4: 12% FPt (25 nm)/BCP (40 nm)/CsF/Al [device 3] were fabricated. In these cases, the emissive layer was either the double-layer of 26 mCPy:12% FPt and 15 nm 26 mCPy: 2% Pt-4, or the single layer of 26mCPy with simultaneous doping of Pt-4 and FPt. Device characterization indicates that the CIE coordinates/CRI of device 2 were (0.341, 0.394)/75, (0.295, 0.365)/70 at 5 V and 7 V, respectively. Significant change in EL spectra with the drive voltage was observed for device 2 indicating a shift in the carrier recombination zone, while relatively stable EL spectra was observed for device 1. This indicates a better charge trapping in Pt-4 doped layers [10]. On the other hand, device 3 having a single light-emitting layer (doped simultaneously) emitted a board spectrum combining emission from the Pt-4 monomer and FPt excimer. Moreover, excellent color stability independent of the drive voltage was observed in this case. The CIE coordinates/CRI at 4 V ($40\;cd/m^2$) and 7 V ($7100\;cd/m^2$) were (0.441, 0.421)/83 and (0.440, 0.427)/81, respectively. A balance in the EL spectra can be further obtained by lowering the doping ratio of FPt. In this regard, devices with FPt concentration of 8% (denoted as device 4) were fabricated and characterized. A shift in the CIE coordinates of device 4 from (0.441, 0.421) to (0.382, 0.401) was observed due to an increase in the emission intensity ratio of Pt-4 monomer to FPt excimer. It is worth noting that the CRI values remained above 80 for such device structure. Moreover, a noticeable stability in the EL spectra with respect to changing bias voltage was measured indicating a uniform region for exciton formation. A summary of device characteristics for all cases discussed above is shown in table 1. The forward light output in each case is approximately $500\;cd/m^2$. Other parameters listed are driving voltage (Bias), current density (J), external quantum efficiency (EQE), power efficiency (P.E.), luminous efficiency (cd/A), and CIE coordinates. To conclude, a highly efficient white phosphorescent excimer-based OLEDs made with two light-emitting platinum complexes and having a simple structure showed improved EL characteristics and color properties. The EQE of these devices at $500\;cd/m^2$ is 14.5% with a corresponding power efficiency of 17 lm/W, CIE coordinates of (0.382, 0.401), and CRI of 81.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.343-351
• /
• 2015

With the diverse services of the current M2M environment being expanded to the organizations, the corporations, and the daily lives, the possibility of the occurrence of the vulnerabilities of the security of the related technologies have become an issue. In order to solve such a problem of the vulnerability of the security, this thesis proposes the technique for applying the cryptography algorithm for the protection of the device key of the M2M environment. The proposed technique was based on the elliptic curve cryptography Through the key exchange and the signature exchange in the beginning, the security session was created. And the white box cipher was applied to the encryption that creates the white box table using the security session key. Application results cipher algorithm, Elliptic Curve Cryptography provides a lightweight mutual authentication, a session key for protecting the communication session and a conventional white-box cipher algorithm and was guaranteed the session key used to encrypt protected in different ways. The proposed protocol has secure advantages against Data modulation and exposure, MITM(Man-in-the-middle attack), Data forgery and Manipulation attack.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.809-816
• /
• 2023

The purpose of this study is to implement a device using the Raspberry Pi that can transmit and supervise data between devices and servers using the oneM2M standard platform, Mobius. Operating under the same concept as a Gateway or Router, this device performs the role of forwarding packets sent from end nodes to other networks. Theoretical functionality has been achieved to concurrently connect and supervise up to 65536 devices. The communication methods for end nodes connected to the Gateway include ZigBee and WiFi, and for long-distance communication, tests were conducted using LoRa modules.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.3
• /
• pp.161-163
• /
• 2014

We consider the device-to-device (D2D) communication underlaying multi-cell interference system, in which the cellular downlink (DL) resource is reused by K cells and two D2D transmission links within each cell. In this paper, it has been shown that the downlink intra-cell and inter-cell interference can be effectively handled by interference alignment (IA) technique, as long as the simultaneous D2D links are properly selected or power-controlled so that they may not incur interference to the base stations in the same and neighbor cells. In particular, we provides the IA technique that can achieve the theoretically maximum possible degree of freedom (DOF), demonstrating that a total of (K+1)M degrees of freedom (DOFs) can be achieved for K-cell interference system with two underlaying D2D links, where base stations, cellular UE's, and D2D UE's all have M transmit and receive antennas.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.667-674
• /
• 2005

In this paper the gate overlap length of the LDMOST is optimized for obtaining longer device lifetime. The LDMOSI device with drift region is fabricated using the $0.25\;{\mu}m$ CMOS Process. The gate overlap lengths on drift region are $0.1\;{\mu}m,\;0.4\;{\mu}m\;0.8\;{\mu}m\;and\;1.1\;{\mu}m$, respectively. The breakdown voltages, on-resistances and hot-carrier degradations of the fabricated LDMOST devices are characterized. The LDMOST device with gate overlap length of $0.4\;{\mu}m$ showed the longest on-resistance lifetime, 0.02 years and breakdown voltage of 22 V and on-resistance of $23\;m\Omega{\cdot}mm^2$.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.685-690
• /
• 2005

DC and RF characteristics of $0.15{\mu}m$ GaAs power metamorphic high electron mobility transistors (MHEMT) have been investigated. The $0.15{\mu}m{\times}100{\mu}m$ MHEMT device shows a drain saturation current of 480 mA/mm, an extrinsic transconductance of 830 mS/mm, and a threshold voltage of -0.65 V. Uniformities of the threshold voltage and the maximum extrinsic transconductance across a 4-inch wafer were 8.3% and 5.1%, respectively. The obtained cut-off frequency and maximum frequency of oscillation are 141 GHz and 243 GHz, respectively. The $8{\times}50{\mu}m$ MHEMT device shows 33.2% power-added efficiency, an 18.1 dB power gain, and a 28.2 mW output power. A very low minimum noise figure of 0.79 dB and an associated gain of 10.56 dB at 26 GHz are obtained for the power MHEMT with an indium content of 53% in the InGaAs channel. This excellent noise characteristic is attributed to the drastic reduction of gate resistance by the T-shaped gate with a wide head and improved device performance. This power MHEMT technology can be used toward 77 GHz band applications.

• Journal of Digital Convergence
• /
• v.12 no.9
• /
• pp.219-223
• /
• 2014

In line with the advanced wireless communication technology, M2M (Machine-to-Machine) communication has drawn attention in industry. M2M communication features are installed and operated in the fields where human accessibility is highly limited such as disaster, safety, construction, health and welfare, climate, environment, logistics, culture, defense, medical care, agriculture and stockbreeding. In M2M communication, machine replaces people for automatic communication and countermeasures as part of unmanned information management and machine operation. Wireless M2M inter-device communication is likely to be exposed to intruders' attacks, causing security issues, which warrants proper security measures including cross-authentication of whether devices are legitimate. Therefore, research on multiple security protocols has been conducted. The present study applied SessionKey, HashFunction and Nonce to address security issues in M2M communication and proposed a safe protocol with reinforced security properties. Notably, unlike most previous studies arguing for the security of certain protocols based on mathematical theorem proving, the present study used the formal verification with Casper/FDR to prove the safety of the proposed protocol. In short, the proposed protocol was found to be safe and secure.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.1
• /
• pp.107-114
• /
• 2011

Two-step thermochemical cycle using ferrite-oxide($Fe_3O_4$) device was investigated. The $H_2O$(g) was converted into $H_2$ in the first experiment which was performed using a dish type solar thermal system. However the experiment was lasted only for 2 cycles because the metal oxide device was sintered and broken down. Another problem was that the reaction was taken place mainly on a side of the metal oxide device. The $m-ZrO_2$, which was widely known as a material preventing sintering, was applied on the metal oxide device. The ferrite loading rate and the thickness of the metal oxide device were increased from 10.67wt% to 20wt% and from 10mm to 15mm, respectively. The chemical reactor having two inlets was designed in order to supply the reactants uniformly to the metal oxide device. The second-experiment was lasted for 5 cycles, which was for 6 hours. The total amount of the $H_2$ production was 861.30mL.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.3-11
• /
• 2016

In the environment of Internet of Things (IoT), IoT devices are limited by physical components such as power supply and memory, and also limited to their network performance in bandwidth, wireless channel, throughput, payload, etc. Despite these limitations, resources of IoT devices are shared with other IoT devices. Especially, remote management of the information of devices and patients are very important for the IoT healthcare service, moreover, providing the interoperability between the healthcare device and healthcare platform is essential. To meet these requirements, format of the message and the expressions for the data information and data transmission need to comply with suitable international standards for the IoT environment. However, the ISO/IEEE 11073 PHD (Personal Healthcare Device) standards, the existing international standards for the transmission of health informatics, does not consider the IoT environment, and therefore it is difficult to be applied for the IoT healthcare service. For this matter, we have designed and implemented the IoT healthcare system by applying the oneM2M, standards for the Internet of Things, and ISO/IEEE 11073 DIM (Domain Information Model), standards for the transmission of health informatics. For the implementation, the OM2M platform, which is based on the oneM2M standards, has been used. To evaluate the efficiency of transfer syntaxes between the healthcare device and OM2M platform, we have implemented comparative performance evaluation between HTTP and CoAP, and also between XML and JSON by comparing the packet size and number of packets in one transaction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.603-605
• /
• 2015

Recent IoT (Internet Of Things) development of the technology is growing rapidly. When multiple devices to perform operations on the IoT environment, it is possible to improve the efficiency of operations by different devices to join the collaborative relationship (Relation) between. Research on existing methods and has been used and the user to issue commands to each device P2M (Person to Machine) method, is now being replaced by effective M2M (Machine to Machine) manner than by way bring forth the relationship between the device P2M. In this paper, we define the relationship between the device and bring forth proposals for collaborative data transfer algorithms. To block the operation duplicated between different work through the proposed algorithm and is believed to improve the efficiency of work to do.