• Electrical & Electronic Materials
• /
• v.9 no.1
• /
• pp.44-50
• /
• 1996

In this study, Selenium device was fabricated by vacuum evaporation method with the substrate temperature at room temperature and its electrical and optical properties were investigated to be used in optical device. The film properties largely depended on the transmittance and annealing time, and improved with aging owing to stress release. We found that the photocurrent of the films increase linearly with light illumination. As a result, Selenium device made by this method yielded a short circuit current density of 10.5mA/$\textrm{cm}^2$, an open circuit voltage of 39OmV.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.228-230
• /
• 2015

차세대 성장동력으로 각광받고 있는 사물인터넷은 국제 표준 혐의체인 oneM2M의 주도 아래 표준화가 진행중이다. 사물인터넷은 모든 사물이 연결되는 초연결성이라는 점과 연산 능력, 메모리, 배터리 등에 많은 한계를 갖는 제약 많은 장치가 대상이라는 두가지 큰 특징이 있다. 본 논문에서는 oneM2M의 장치 관리 표준에 대해서 설명한다. 또한 사물인터넷의 기술적 이슈를 해결하기 위해 등장한 CoAP 기반의 LWM2M 표준 기술을 소개하고 이를 데이터 모델링 언어인 YANG 기반의 장치관리 정보 설계를 제안한다.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.40-47
• /
• 2001

The structural dependence of the performance of an 1.55 $1.55{\mu}m$ InGaAsPIInGaAsP MQW electro-absorption modulator for highspeed digital fiber communication was systematically investigated. The effects of n-doped SCH region length $t_n$ as well as the general structure parameters including quantum well number $N_w$, well-thickness $t_w$, detuning wavelength $\Delta\lambda$, and device length L were thoroughly analyzed. Thereby, a high-pelfoIDlance electro-absorption modulator with device length L of $100{\mu}m$ was successfully designed. The designed structure showed excellent characteristics that have residual loss less than -1.5 dB, operational voltage from 0 V to -2V, and extinction ratios of -2.92 dB at $V_{\alpha}$=-1 V and -10 dB at $V_{\alpha}$=-2V.X>=-2V.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2364-2367
• /
• 2015

In this study, we fabricated an electrolyte-insulator-metal (EIM) device incorporating a high-k Al₂O₃ sensing membrane using a porous anodic aluminum oxide (AAO) through a two-step anodizing process for pH detection. The structural properties were observed by field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction patterns (XRD). Electrochemical measurements taken consisted of capacitance-voltage (C-V), hysteresis voltage and drift rates. The average pore diameter and depth of the AAO membrane with a pore-widening time of 20 min were 123nm and 273.5nm, respectively. At a pore-widening time of 20 min, the EIM device using anodic aluminum oxide exhibited a high sensitivity (56mV/pH), hysteresis voltage (6.2mV) and drift rate (0.25mV/pH).

• Electrical & Electronic Materials
• /
• v.20 no.2
• /
• pp.12-21
• /
• 2007

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.8
• /
• pp.453-464
• /
• 2004

In order to solve the well-known drawback of reduced flexibility that is associate with ASIC implementations, this paper proposes a novel arithmetic unit over GF(2$^{m}$ ) for field programmable gate arrays (FPGAs) implementations of elliptic curve cryptographic processor. The proposed arithmetic unit is based on the binary extended GCD algorithm and the MSB-first multiplication scheme, and designed as systolic architecture to remove global signals broadcasting. The proposed architecture can perform both division and multiplication in GF(2$^{m}$ ). In other word, when input data come in continuously, it produces division results at a rate of one per m clock cycles after an initial delay of 5m-2 in division mode and multiplication results at a rate of one per m clock cycles after an initial delay of 3m in multiplication mode respectively. Analysis shows that while previously proposed dividers have area complexity of Ο(m$^2$) or Ο(mㆍ(log$_2$$^{m}$ )), the Proposed architecture has area complexity of Ο(m), In addition, the proposed architecture has significantly less computational delay time compared with the divider which has area complexity of Ο(mㆍ(log$_2$$^{m}$ )). FPGA implementation results of the proposed arithmetic unit, in which Altera's EP2A70F1508C-7 was used as the target device, show that it ran at maximum 121MHz and utilized 52% of the chip area in GF(2$^{571}$ ). Therefore, when elliptic curve cryptographic processor is implemented on FPGAs, the proposed arithmetic unit is well suited for both division and multiplication circuit.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.2
• /
• pp.57-65
• /
• 1995

The effects of device geometry and layout on high speed performance such as current gain outoff frequency(f$_{T}$) and maximum oscillation frequency(f$_{max}$) are of very improtant for the scaling-down of geterojunction bipolar transistors(HBT$_{s}$). In this paper AlGaAs/GaAs HBTs are fabricated by MBE epitaxial growth and conventional mesa process, and the experimental data of emitter-base geometru dependency of HBT performance are presented in order to provide the quantitative information for optimum device structure design. It is shown that f$_{T}$ and f$_{max}$ are inversely proportional to the emiter stripe width, while the low emitter perimeter/area ratio is better to f$_{T}$ and worse ot f$_{max}$. It is also demonstrated the f$_{T}$ and f$_{max}$ are highly improved by the emitter-base spacing reduction resulting in less parsitic effects. As the result f$_{T}$ of 42GHz and f$_{max}$ of 23GHz are obtained for fabricated HBT with emitter area of 3${\times}20^{\mu}m^{2}$ and E-B spacing of 0.2$\mu$m.m.m.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.9-17
• /
• 2015

The development of wireless communication technology and change in the ICT market has led to the development of the M2M service and technology. Under these circumstances, the M2M environment has been the focus of communication environment construction between machines without control or direct intervention of human being. With characteristics of wireless communication environment, the possibility of being exposed to numerous security threats and safe communication security technology have becoming an issue an important requirements for problems such as data exposure, forgery, modulation, deletion, and privacy. This research analyzes requirements of trapdoor collision hash, generates keys between groups under the M2M environment by using the specificity of trapdoor, and suggests technology to exchange keys with session keys. Further, it also suggests techniques to confirm authentication of device and gateway in accordance with group key generation. The techniques herein suggested are confirmed as safe methods in that they have attack resistance such as Masquerade Attack, Man-in-the-Middle Attack, and Replay Attack in the group communication block by using the speciality of collision message and collision hash.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.169-171
• /
• 2007

This paper presents the development of DVB-T reception module including the RF-tuner. For the development of the reception module, we design the board using the ALi M3330 MPEG-2 decoder processor and implement its device driver. Simple On-Screen Display (OSD) applications are also designed on the middleware of ALi M3330 MPEG-2 decoder processor. To evaluate the performance of reception module, we test the decoding operations using the input TS stream generated by DVB-T stream generator and confirm the correctness of its functional operations.

• Journal of Korean Society on Water Environment
• /
• v.21 no.2
• /
• pp.118-124
• /
• 2005

The oxygen solubilized device(O.S.D) and standardized microorganism culture system is more efficient than physical and chemical purification techniques in closed water. This study was to determine how the O.S.D and standardized culture system is efficient in purification capacity in closed water based on the lab scale and pilot plant. In the batch test, inducing the quantitative results from pilot plant operation condition, removal efficiency of COD and TN were about 48.3% and 35% respectively, while SS and chlorophyll-a were 94.9% and 68.7%. The pilot plant results showed that suspended solid(SS) and chlorophyll-a removal efficiency were 60% and 59% respectively, due to coagulation characteristics by standardized culture. Total nitrogen(TN) and total phosphorus(TP)showed good effect for the purification of target pond water quality from field data. Additionally, released velocity was determined in control condition of $5.31mgPO{_4}^{3-}{\cdot}m^{-2}{\cdot}day^{-1}$ and $2486.8mgCOD{\cdot}m^{-2}{\cdot}day^{-1}$. Otherwise, phosphate and COD reflux in the aeration and microorganism condition was showed $-9.95mgPO{_4}^{3-}{\cdot}m^{-2}{\cdot}day^{-1}$ and $-397.88mgCOD{\cdot}m^{-2}{\cdot}day^{-1}$. This technology is the most effective not only removal of SS and chlorophyll-a but also control of phosphate and COD release which is very important phenomena in evaluating water quality in closed water like a reservoir and pond.