• 대한치과보철학회지
• /
• 제33권3호
• /
• pp.584-609
• /
• 1995

The purpose of this study was to evaluate the difference of the galvanic corrosion behaviour of the titanium in contact with gold alloy, silva-palladium alloy, and nickel-chromium alloy using the immersion and electrochemical method. And the effects of galvallit couples between titanium and the dental alloys were assessed for their usefulness as materials for superstructure. The immersion method was performed by measuring the amount of metal elementsreleased by Inductivey coupled plasma emission spectroscopy(ICPES) The specimen of fifteen titanium plates, the five gold alloy, five silver-palladium, five nickel-chromium plates, and twenty acrylic resin plates ware fabricated, and also the specimen of sixty titanium plugs, the thirty gold alloy, thirty silver-palladium, and nickelc-hromium plugs were made. Thereafter, each plug of gold alloy, silver-palladium, and nickel-chromium inserted into the the titanium and acrylic resin plate, and also titanium plug inserted into the acrylic resin plate. The combination specimens uf galvanic couples immersed in 70m1 artificial saliva solution, and also specimens of four type alloy(that is, titanium, gold, silver-palladium and nickel-chromium alloy) plugs were immersed solely in 70m1 artificial sativa solution. The amount of metal elements released was observed during 21 weeks in the interval of each seven week. The electrochemical method was performed using computer-controlled potentiosta(Autostat 251. Sycopel Sicentific Ltd., U.K). The wax patterns(diameter 11.0mm, thickness,in 1.5mm) of four dental casting alloys were casted by centrifugal method and embedded in self-curing acrylic resin to be about $1.0cm^2$ of exposed surface area. Embedded specimens were polished with silicone carbide paper to #2,000, and ultrasonically cleaned. The working electrode is the specimen of four dental casting alloys, the reference electrode is a saturated calmel electrode(SCE) and the ounter electrode is made of platinum plate. In the artificial saliva solution, the potential scanning was carried out starting from-700mV(SCE) TO +1,000mV(SCE) and the scan rate was 75mV/min. Each polarization curve of alloy was recorded automatically on a logrithmic graphic paper by XY recorder. From the polarization curves of each galvanic couple, corrosion potential and corrosion rates, that is, corrosion density were compared and order of corrosion tendency was determined. From the experiments, the following results were obtained : 1. In the case of immersing titanium, gold alloy, silver-palladium alloy, and nickel-chromium alloysolely in the artificial saliva solution(group 1, 2, 3, and 4), the total amount of metal elements released was that group 4 was greater about 2, 3 times than group 3, and about 7.8 times than group 2. In the case of group 1, the amount of titanium released was not found after 8 week(p<0.001). 2. In the case of galvanic couples of titanium in contact with alloy(group 5, 6), the total amount of metal elements released of group 5 and 6 was less than that of group 7, 8, 9, and 10(p<0.05). 3. In the case of galvanic couples of titanium in contact with silver-palladium alloy(group 7, 8), the total amount of metal elements released of group 7 was greater about twice than that of group 5, and that of group 8 was about 14 times than that of group 6(p<0.05). 4. In the case of galvanic couples of titanium in contact with nickel-chromium alloy(group 9, 10), the total amount of metal elements released of group 9 and 10 was greater about 1.8-3.2 times than that of group 7 and 8, and was greater about 4.3~25 times than that of group 5 and 6(p<0.05). 5. In the effect of galvanic corrosion according to the difference of the area ratio of cathode and anode, the total amount of metal elements released was that group 5 was greater about 4 times than group 6, group 8 was greater about twice than group 7, and group 10 was greater about 1.5 times than group 9(p<0.05). 6. In the effect of galvanic corrosion according to the elasped time during 21 week in the interval of each 7 week, the amount of metal elements released was decreased markedly in the case of galvanic couples of the titanium in contact with gold alloy and silver-palladium alloy but the total amount of nickel and beryllium released was not decreased markedly in the case of galvanic couples of the titanium in contact with nickel-chromium alloy(p<0.05). 7. In the case of galvanic couples of titanium in contact with gold alloy, galvanic current was lower than any other galvanic couple. 8. In the case of galvanic couples of titanium in contact with nickel-chromium alloy, galvanic current was highest among other galvanic couples.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권10호
• /
• pp.1041-1047
• /
• 1997

In this paper the dielectric properties of (0.8-x)Pb(Mb$_{1}$3//Nb/2/3)O$_3$/BaTiO$_3$-CaZrO$_3$(x=0.1, 0.15, 0.2, 0.25) ceramics were investigated. Specimens were prepared by the conventional mixed oxide method and sintering temperature and time were 1000~115$0^{\circ}C$ 2hr, respectively. The structural and dielectric properties with variation of sintering temperature and composition were investigated. All the specimens sintered at 115$0^{\circ}C$ for 2hr showed the highest value of 1043. With increasing the contents of CZ and frequency dielectric constant was decreased and which was decreased with increasing temperature from 3$0^{\circ}C$ to 15$0^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.357-360
• /
• 2000

Ferroelectric 0.05PZN-xPZT(90/10)-(0.95-x)PZT(10/90) (x=0.65, 0.85) specimens were fabricated by the mixed-oxide method and cold-pressing method using sol-gel derived PZT(90/10) and PZT(10/90) powders. All specimens show a uniform ferroelectric grain without the presence of the pyrocholre phase. Average grain size increased with an increase in sintering temperature, the value for the x=0.65 specimen sintered at 125$0^{\circ}C$ was 14.4${\mu}{\textrm}{m}$. The dielectric constant and dielectric loss of the x=0.65 specimen sintered at 125$0^{\circ}C$ were 1247, 2.05%, respectively. All specimens showed fairly good temperature and frequency stability of dielectric constant with the range from -2$0^{\circ}C$ to 6$0^{\circ}C$ and 100Hz to 10MHz. The coercive electric field and the remanent polarization of x = 0.65 specimen sintered at 125$0^{\circ}C$ were 8.5 kV/cm and 13 $\mu$C/cm$^2$, respectively.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권3호
• /
• pp.251-258
• /
• 1996

Sol-Gel derived ferroelectric Pb(Z $r_{0.52}$ $Ti_{0.48}$) $O_{3}$ thin films have been fabricated on Pt/Ti/ $SiO_{2}$/Si substrate. Two kinds of fast annealing methods, F-I (six times of intermediate and final annealing) and F-II(one final annealing after six times of intermediate annealing) were used for preparation of multi-coated PZT thin films. As the annealing temperature was increased, high capacitance could be obtained, for instance, 2700.angs.-thick PZT thin film annealed at 680.deg. C had a capacitance value of approximately 20nF at 1kHz. In addition, it is found that the dielectric constant is a function of the perovskite phase fraction. In case of F-I method, PZT thin film had a remanent polarization(Pr) of 8-15.mu.C/c $m^{2}$ and a coercive field( $E_{c}$) of 35-44kV/cm according to annealing temperature, whereas PZT film fabricated by F-II method had as high as 24-25.mu.C/c $m^{2}$ and 48-59kV/cm, respectively. As a result of measuring Curie temperature, PZT thin film had a range of 460-480.deg. C by F-I method and more or less higher range of 525-530.deg. C by F-II method, which implied that different microstructures could cause the different Curie temperature. Through I-V measurement, leakage current of PZT thin film fabricated by F-I and F-II methods was 64nA/c $m^{2}$ and 2.2.mu.A/c $m^{2}$ in the electric field of 100kV/cm, respectively.y.y.y.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.154-154
• /
• 2017

Ti-6Al-4V alloys are widely used as metal-lic biomaterials in dentistry and orthopedics due to its excellent biocompatibility and me-chanical properties. However, because of low biological activity, it is difficult to form bone growth directly on the surface of titanium implants. For this reason, surface treatment of plasma electrolytic oxidation(PEO) was used for dental implants. To enhance bioac-tivity on the surface, strontium(Sr) and sili-con(Si) ions can be added to PEO treated sur-face in the electrolyte containing these ions. The presence of Sr in the coating enhances osteoblast activity and differentiation, where-as it inhibits osteoclast production and prolif-eration. And Si has been found to be essen-tial for normal bone, cartilage growth, and development. In this study, electrochemical characteristics of Ca, P, Sr, and Si ions from PEO-treated Ti-6Al-4V alloy surface was re-searched using various experimental instruments. DC power is used and Ti-6Al-4V al-loy was subjected to a voltage of 280 V for 3 minutes in the electrolyte containing 5, 10, 20M% Sr ion and 5M% Si ion. The morphol-ogies of PEO-treated Ti-6Al-4V alloy by electrochemical anodization were examined by field-emission scanning electron micro-scopes (FE-SEM), energy dispersive x-ray spectroscopy (EDS), x-ray diffraction (XRD) and corrosion analysis using AC impedance and potentiodynamic polarization test in 0.9% NaCl solution at similar body tempera-ture using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to + 2000mV.

• 한국재료학회지
• /
• 제10권9호
• /
• pp.607-611
• /
• 2000

고밀도 DRAM에서 박막 커패시터로의 적용을 위해 Zr이 첨가된 (Ba(sub)1-x, Sr(sub)x)TiO$_3$<원문차조> 박막이 r.f. magnetron sputter-ing 법에 의해 제조되었다. 증착된 박막들은 다결정질 구조를 보였으며 증착압력이 감소함에따라 Zr/Ti의 비가 현저히 증가하였으며 본 연구에서는 얻어진 박막들은 100kHz에서 380∼525의 유전상수값을 나타냈다. 전압에 따른 커패시턴스와 분극량의 변화는 이력특성을 크게 보이지 않아 상유전상으로 형성되었음을 보였다. 누설전류밀도는 증착압력이 감소함에 따라 작아지는 경향을 보였고 10mTorr이상에서 증착된 박막의 경우 200kV/cm의 전계에서 10(sup)-7∼10(sup)-8A/$\textrm{cm}^2$의 차수를 갖는 누설전류밀도를 보여 본 연구에서 제조된 (Ba(sub)1-x, Sr(sub)x)(Ti(sub)1-x, Zr(sub)x)O$_3$<원문참조>박막은 고밀도 DRAm을 위한 커패시터에의 적용가능성을 보였다.

• 한국결정성장학회지
• /
• 제15권3호
• /
• pp.124-127
• /
• 2005

[ $Ti:LiNbO_3$ ], 광도파로 제작을 위해 큐리온도$(T_c)$ 아래에서 백금박스 내에서 알곤 과 산소 분위기 내에서 열처리 과정 동안 기판 표면의 강유전 도메인 특성 변화를 관찰하였다. 열처리 된 $LiNbO_3$ 기판의 +Z면의 경우 전체적으로 약 $1.6{\mu}m$ 두께로 도메인 반전이 이루어 졌으며, 표면에서 etch hillock이 관찰되었다. $LiNbO_3$ 결정 표면의 Li 이온이 외부로 확산 되는 영향을 감소시킬 수 있는 환경에 있는 기판 면에서 하나의 도메인이 관찰되었으며, 이때 결정 표면에서의 식각특성, 결정성 및 양이온 분포변화에 관하여 X-선 회절, AFM 및 SIMS를 이용하여 분석하였다.

• KSBB Journal
• /
• 제10권1호
• /
• pp.63-70
• /
• 1995

실험실에서 자체 제작한 자유유통 전기이동 장치 에서 등전집속법을 이용한 대두 단백질의 분리를 통 해 운전 조건들이 분리에 미치는 영향을 조사하였 다. 매 실험마다 pH, 전기전도도, uv 흉광도 (280nm) 등을 측정하였고 시료의 순도는 SDS­P PAGE 분석을 통해 점검하였다. Tris와 boric acid로 처리한 대두단백질 추출액에 g glutamic acid, histidine, argmme, glycine 등 아 미노산 각 ImM과 dipeptide로 glycyl-glycine 2mM, 배경 전해액으로서 KCI ImM로 구성된 시료 의 완충액을 혼합하여 시료로 사용하였다. 분리막을 셀룰로오스 아세테이트를 사용할 경우 pH는 양극쪽에서 3, 음극쪽에서 8 정도의 값을 보였으며 2개의 변곡점을 나타내었다. 가해준 전압은 3 300V에서 lOOOV의 범위였으며 전압이 높을수록 더 나은 분리도를 얻었으나 전압을 더 높일 경우 과도한 Joule열의 발생으로 인해 한계가 있었다. 시간이 지남에 따라 단백질들은 분리조 중앙 부근에서 집속이 일어났으며 pH와 전기전도도의 변화로부터 분리 조내의 이온들이 막을 통해 전극쪽으로 이통해 가고 있음을 알 수 있었다. 완충용액의 농도를 5배로 증 가시킬 경우 300V에서 좋은 집속을 얻었으냐 10배 이상으로 농도를 높일 경우에는 분리조 입구와 출구 의 유체 온도차가 $25^{\circ}C$ 이상이 되어 단백질의 변성 이 일어날 수 있어 더 높일 수 없었다. 이온교환막을 사용할 경우 이온의 분극화현상을 일으켜 U자 형태 의 전기전도도 분포를 나타내었다. 아미노산 혼합물 대신 상용의 ampholyte를 사용하더라도 분리도에 있어 큰 차이가 없었다.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.103-109
• /
• 2006

This research is contents about output characteristic of optic current sensor that use faraday effect. optic current sensor used in an experiment is consisted of three parts.(1) Source of light used laser diode of 1310[nm].(2) Sensor section manufactured circularly according to gas insulated switchgear. And $9/125[{\mu}m]$ standard single mode optical fiber for communication was installed winding 20 [turn] on sensor section core surroundings of diameter 31 [cm].(3) Electrical signal of PD(Photo detector) is collected using NI company's 16bit DAQ board via terminal block. Collected data analyzed by different three signal processing methods. NI company's $Labview^{TM}$ was used to signal processing software. As a result, In signal processing of optic current sensor, we could know that noise greatly more influences the error generation than fluctuation of light intensity. also, 1 class CT(current transformer) manufacture that have error rate less than 1[%] was available by removing these

• 한국광학회지
• /
• 제6권1호
• /
• pp.26-32
• /
• 1995

Kerr cell 광스위치를 옥소 레이저 증폭단에서 짧은 펄스를 발생시키는 광절단기로서 그리고 이후의 증폭기들을 광학적으로 분리하는 격리기로 사용하였다. Kerr cell 양단에 인가된 전위차에 따른 편광의 회전에 의해 입사된 펄스를 자를 수 있음을 보였으며 회로의 전기적 특성을 이용하여 케이블의 길이차에 의해 5ns와 1ns 펄스를 발생시켰다. 공진기에서 펄스폭이 긴 펄스가 발생한 경우 한개 이상의 단축된 출력 펄스가 발생함을 확인하였다. 또한 Kerr cell의 동작전압을 변화시켜 얻은 투과도를 Kerr 이론과 비교하였다. 단축된 펄스를 옥소레이저 전 증폭기를 통해 증폭하여 4ns 펄스에서 2J의 출력을 얻어 0.5GW의 최종출력을 얻었다.