• 한국전기전자재료학회논문지
• /
• 제27권5호
• /
• pp.297-302
• /
• 2014

$La_{0.5}Sr_{0.5}CoO_3$ (LSCO) electrode thin films with a resistivity of ~ 1,600 ${\mu}{\Omega}cm$ were grown on c-$Al_2O_3$ (0001) substrate. $ZnSnO_3$ (ZTO) thin films with different thicknesses were directly grown on LSCO/c-$Al_2O_3$ (0001) substrates at a substrate temperature that ranged from 550 to $750^{\circ}C$ using Pulsed Laser Deposition (PLD). The secondary phase $Zn_2SnO_4$ occurred during the growth of ZTO films and it became more significant with further increasing substrate temperature. Polarization-electric-field (P-E) hysteresis characteristics, with a remnant polarization and coercive field of 0.05 ${\mu}C/cm^2$ and 48 kV/cm, respectively, were obtained in the ZTO film grown at $700^{\circ}C$ in 200 mTorr.

• 한국전기전자재료학회논문지
• /
• 제18권3호
• /
• pp.248-252
• /
• 2005

The effects of electric field strength and mechanical compressive stress on the displacement of multilayered ceramic actuator, stacked alternatively 0.2 (PbM $n_{1}$3/N $b_{2}$3/ $O_3$)-0.8(PbZ $r_{0.475}$ $Ti_{0.525}$ $O_3$) ceramic thin films and 70Ag-30Pd electrodes were investigated. Because the actuators were designed to stack ceramic layer and electrode layer alternatively, the ceramic-electrode interfaces may act as a resistance to motion of domain wall. so the polarization and strain were affected by the amount of 180$^{\circ}$domain, electric field strength and mechanical compressive stress. Consequently, the change of polarization, displacement with respect to field strength, and mechanical compressive stress were likely to be caused by readiness of the domain wall movement around the ceramic-electrode interfaces.ces.

• 한국세라믹학회지
• /
• 제35권5호
• /
• pp.472-478
• /
• 1998

Ferroelectric SrBi2Ta2O9(SBT) films were deposited on Pt/Ti/SiO2/Si substrates at 50$0^{\circ}C$ using a sintered SBT target Bi and Ta targets by modified rf magnetron sputtering and then were annealed at 80$0^{\circ}C$ for 10min in oxygen ambinet(760 torr) The composition of the SBT films could be easily controlled using the mul-ti-targets. The film composition of {{{{ {Sr }_{0.8 } {Bi }_{2.9 } {Ta}_{2.0 } {O }_{9 } }} was obtained with SBTd sputtering power of 100 W Bi of 25W and Ta of 10 W. A 250nm thick SBT films exhibited a dense and uniform microstructure and showed the remanent polarization(Pr) of 14.4 $\mu$C/cm2 and the coercive field({{{{ {E }_{c } }})of 60 kV/cm at applied voltage of 5 V. The SBT films show practically no polarization fatigue up to {{{{ {10 }_{10 } }} cycles under 5V bipolar pulse. The retention characteristics of the SBT films looked very promising and the leakage current density of the SBT films was about 1.23$\times${{{{ {10 }^{-7 } }}A/c{{{{ {m }^{2 } }} at 120kV/cm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1219-1220
• /
• 2015

마이크로, 나노유체 (micro-, nanofluidics)을 이용한 종이 기반 분석 소자 (paper-based analytical devices, micro-PADs)에 대한 관심이 증가하고 있다. 종이 기반의 분석 소자는 초저가의 비용과 간단한 공정 방법으로 인하여 상용화 컨셉의 바이오센서로 각광받고 있다. 하지만, 종이 기반의 분석 소자는 낮은 검출 한계 (limit of detection, LOD)와 민감도 (sensitivity)의 제한이 있다. 그로 인해 우리는 이온 선택적 투과층 (ion permselective membrane, i.e. Nafion)을 종이 기반의 분석 소자와 결합하여 이온 농도 분극 (ion concentration polarization, ICP) 현상을 구현하여 낮은 검출한계와 민감도를 개선할 수 있었다. 접착력이 있는 테이프 표면에 이온 선택적 투과층을 패터닝 (patterning)하여 종이 기반 분석 소자와 결합하여 매우 간단하게 소자를 제작할 수 있었다. 따라서 종이 기반의 채널 양단에 직류 전압을 인가했을 때 발생하는 ICP 현상으로 인하여 형광 물질 (fluorescence dye)이 농축(preconcentration)되는 것을 확인할 수 있었다. 구체적으로, 초기 농도가 1.55 nM인 형광 물질을 이용하여 200 V의 외부전압을 인가했을 때, 500 초 이내에 1000 배 이상의 농축비를 얻을 수 있었다. 따라서, 외부 전압을 상용화된 건전지 출력값으로 낮출 수 있다면 다양한 종이 기반 분석 소자와 간단한 결합 방법을 통해 상용화 컨셉의 바이오센서로도 구현이 가능할 것이다.

• 천문학회지
• /
• 제44권4호
• /
• pp.135-142
• /
• 2011

A $200'{\times}200'$ region around 30 Doradus in the Large Magellanic Cloud (LMC) is observed and analyzed in the near-infrared. We obtain polarimetry data in the J, H, and Ks bands using the SIRIUS polarimeter SIRPOL at the Infrared Survey Facility 1.4 m telescope. We measure the Stokes parameters of 2562 point-like sources to derive the degree of polarization and the polarization position angles. We discuss the statistics of the groups classified by color-magnitude diagram and proper motions of the sources, in order to separate the Galactic foreground sources from those present in the LMC. We notice that groups classified by the proper motion data show a tendency towards different polarimetric properties.

• Corrosion Science and Technology
• /
• 제21권3호
• /
• pp.171-183
• /
• 2022

The performance and inhibitory action of the aqueous extract of Cyperus Conglomeratus's leaves against corrosion of XC70 steel in a 1M HCl acid medium are studied by the determination of the weight loss, the potentiodynamic polarization curves analysis, and electrochemical impedance measurements (electrochemical techniques). The corrosion inhibitory efficiency of XC70 steel increases with the increasing concentration of the green inhibitor, however, the corrosion rate of the steel decreases. Weight loss measurements show that the maximum percentage corrosion inhibition efficiency is approximately 61.86%, while the analysis of the mixed character polarization curves shows that the inhibitor could achieve an inhibition efficiency of 86.96%. The electrochemical impedance study confirmed that the value of the charge transfer resistance (R_ct) increases and the value of the double layer capacity (C_dl) decreases with increasing concentration of the aqueous extract of Cyperus Conglomeratus's leaves, thus increasing the inhibition efficiency. The study showed that this aqueous extract acts by adsorption on the metal surface; this adsorption follows the Langmuir isotherm. This research work showed that Cyperus Conglomeratus leaves extract acts as an effective and eco-friendly inhibitor on mild steel in an acid medium.

• 대한전기학회논문지
• /
• 제43권2호
• /
• pp.303-311
• /
• 1994

Optimum conditions for the deposition of N-docosylquinolium-TCNQ ultrathin organic films using the Langmuir-Blodgett etchnique and the molecular orientation and alignment of the LB films were studied. The $\pi$-A isotherm of the N-docosylquinolium-TCNQ was measured at the air-water interface varying with the subphase temperature, subphase pH, compressing speed and amounts of solutions for spreading. The LB film was deposited under the surface pressure of 30mN.m and 45mN/m and other deposition conditions. The molecular orientation and alignment of the LB films were studied by the polarization absorption technique. The $\pi$-A isotherm showed that the stable N-docosylquinolium -TCNQ monolayer was formed on the water surface at the condition of 25$^{\circ}C$,pH 5.6, molecular density of 2.1${\times}$10S014T~2.6${\times}$10S014T/cmS02T. The LB film was deposited under the surface pressure of 45mN/m had better packing density, orientation and alignment than the film of 30mN/m.

• Journal of Electrochemical Science and Technology
• /
• 제13권1호
• /
• pp.138-147
• /
• 2022

The synergistic effect of 2-chloromethylbenzimidazole (2-CBI) and potassium iodide (KI) for mild steel in 1 M hydrochloric acid solution was investigated by potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS). The results showed that, with the addition of 100 ppm potassium iodide, the inhibition efficiecy (IE) of 100 ppm 2-CBI in 1 M hydrochloric acid had been improved from 91.14% to 96.15%. And synergistic parameter of 100 ppm 2-CBI with different amounts of potassium iodide is always greater than 1. The adsorption of potassium iodide combining with 100 ppm 2-CBI obeys to the Langmuir adsorption isotherm. Thermodynamic adsorption parameters, including ∆G⁰_ads, ∆H_a and ∆S_a of the adsorption of the combinned inhibitor, as well as the E_a of the mild steel corrosion in 1 M HCl with the combinned inhibitor, were calculated.

• Membrane and Water Treatment
• /
• 제13권2호
• /
• pp.63-72
• /
• 2022

Choline chloride-glycerol (1:2 mol), a natural deep eutectic solvent (NADES) is examined as a draw solution in forward osmosis (FO) for dewatering application. The NADES is easy to prepare, low in toxicity and environmentally benign. A polyamide thin film composite membrane was used. Characterization of the membrane confirmed porous membrane structure with good hydrophilicity and a low structural parameter (722 ㎛) suitable for FO application. A dilute solution of 20% (v/v) NADES was enough to generate moderate water flux (14.98 L m^-2h^-1) with relatively low reverse solute flux (0.125 g m^-2h^-1) with deionized water feed. Application in dewatering industrial wastewater feed showed reasonably good water flux (11.9 L m^-2h^-1) which could be maintained by controlling the external concentration polarization and fouling/scaling mitigation via simple periodic deionized water wash. In another application, clarified sugarcane juice could be successfully concentrated. Recovery of the draw solute was accomplished easily by chilling utilizing thermo responsive phase transition property of NADES. This study established that low concentration NADES can be a viable alternative as a draw solute for dewatering of wastewater and other heat sensitive applications along with a simple recovery process.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1369-1375
• /
• 2007

최근 전기통신통신망의 용량은 인터텟, 음성패킷, Audio/Video 스트리밍의 멀티미디어 서비스 수요로 인한 정보통신 용량의 증가에 비례하여 급속히 증가하고 있다. 그 결과 DWDM(Dense Wavelength Division Multiplexing) 기법이 초고속 광통신망에서 추가적인 광섬유망과 고속장비 없이 용량을 증가시키는 해결 방법으로 행하여지고 광학적인 방법이 가능하다는 것이 판명되었다. 따라서, 본 논문에서는 이러한 기능을 갖는 광필터를 설계하기 위하여 광섬유 한쪽의 클래드를 연마하여 다층 슬래브 도파로에 결합시킨 형태의 광섬유/다층 슬래브 결합구조의 광필터를 제안하였다. 광섬유와 슬래브의 분리간격이 $3{\mu}m$일 때 제안된 광필터는 $1.3{\mu}m$의 통신창에서 편광 독립성은 32nm로서 TM 모드와 TE 모드에 대해 중심파장이 각각 ${\lambda}_0=1.274755{\mu}m$와 ${\lambda}_0=1.30591{\mu}m$일 때 0.1 nm의 FWHM(Full Width at Half Maximun) 특성을 가진다.