• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.27-38
• /
• 1999

The errors between track segments or at the cross-over points of shipborne gravity were successfully reduced by applying a cross-over error adjustment technique using satellite gravity. The integration of shipborne and satellite altimeter-implied free-air gravity anomalies after the cross-over error adjustment resulted in a high resolution gravity map which contains both short and long wavelength components. The successful adjustment of the cross-over errors in the shipborne gravity using the satellite gravity suggests that the shipborne gravity can be combined with the satellite anomalies characterized by a stable and long wavelength component. The resulting free-air anomaly map is evenly harmonized with both short and long wavelength anomalies. Thus the corrected anomaly map can be better used for the geological interpretation. Free-air anomalies with more than 140 mGal in total variations generally correspond to the seafloor topographic changes in their regional patterns. A series of gravity highs are aligned from the Korea Plateau to the Oki Island, which are interpreted to be caused by seamounts or volcanic topographies. The gravity minima along the western and southern shelf edge are associated not only with the local basement morphology and thick sediment fill at the continental margin, but also possibly with the crustal edge effect known for passive continental margins. Series of NE-trending linear anomalies are possibly caused by a swarm of volcanic intrusions followed the initial opening of the Ulleung Basin. The linear high anomalies in the Ulleung Plateau are terminated by the straightly NNW-trending anomalies with a sharp gradient in its western boundary which indicates a fault-line scarp. The opposite side adjoined with the fault-line scarp shows no correlation with the fault-line scarp in geometry indicating that the block might be horizontally slided from the north. A gravity high in contrast to the deepening in seafloor toward the northeastern central Ulleung Basin is probably responsible for the thin crust and shallow seated mantle. The gravity minima along the western and southern shelf edge are associated not only with the local basement morphology and thick sediment fill at the continental margin, but also possibly with the crustal edge effect known for passive continental margins. Series of NE-trending linear anomalies are possibly caused by a swarm of volcanic intrusions followed the initial opening of the Ulleung Basin. The linear high anomalies in the Ulleung Plateau are terminated by the straightly NNW-trending anomalies with a sharp gradient in its western boundary which indicates a fault-line scarp. The opposite side adjoined with the fault-line scarp shows no correlation with the fault-line scarp in geometry indicating that the block might be horizontally slided from the north. A gravity high in contrast to the deepening in seafloor toward the northeastern central Ulleung Basin is probably suggestive of a thin crust and shallow seated mantle.

• Applied Microscopy
• /
• v.29 no.2
• /
• pp.211-221
• /
• 1999

The ultrastructural changes of cuticular surface, excretory and digestive organs of Anisakis simplex larvae chronologically recovered from experimental cats were observed with a SEM and TEM. The larva recovered from an experimental cat at 3 days post-infection (PI) retained the cuticular surface with regular transverse striations and a longitudinal groove on the lateral side of body. This finding suggests that the molting of the 3rd stage larva of A. simplex to 4th one occurred from the 3rd day after infection in cats. The excretory organ (renette cell) consisted of a large cell with numerous ductules ramified from the main duct, mitochondria and secretory granules in cytoplasm. Secretory granules in the renette cell of larvae recovered at 24 hours PI were round whereas those of control and larvae recovered at 6 hours PI were amorphous. Muscular esophagus and ventriculus also retained many secretory granules in the cytoplasm. The secretory granules in these organs of larvae recovered at $6\sim24$ hours PI were electron-dense and widely distributed whereas those of control worm were packed in a pocket and retained various electron densities. In the cytoplasm of intestinal epithelial cells, numerous fine glycogen particles and mitochondria were distributed. The chronological changes of secretory granules in renette cell, muscular esophagus and ventriculus seem to be related with the worm penetration into host tissue.

• Clinical and Experimental Pediatrics
• /
• v.49 no.7
• /
• pp.777-783
• /
• 2006

Purpose : Urinary tract infection(UTI) is one of the most frequent infections in children. E. coli is the most frequent etiological micropathogen in pediatric community UTI, and E. coli has developed resistance to many antibiotics, highlighting the need for regular surveys of this organism resistant patterns in the community. The aim of this study was to determine the oral antibiotic susceptibility patterns of E. coli, isolated from pediatric patients with uncomplicated community acquired UTI. Methods : E. coli isolates, obtained from pediatric patients with uncomplicated community acquired UTI between October in 2004 to September in 2005. And minimal inhibitory concentrations(MICs) of oral aminopenicillins and beta-lactamase inhibnitors(ampicillin, amoxacillin, ampicillin-sulbactam), oral cephalosporins(cefaclor, cefixime) and sulfa drug(trimethoprime-sulfamethoxazole) were performed according to the National Committee for Clinical Laboratory Standards(NCCLS) guide line. Results : Total 211 organisms were isolated from pediatric out-patients with community UTI. E. coli was the most common organism(89 percent), followed by E. fecalis, Proteus species, S. aureus, M. morganii, and P. aeruginosa. The resistant rates of aminopenicillins and beta-lactamase inhibitors, cefaclor and sulfa drug to E. coli were very high. But, the resistant rate of cefixime was markedly low, and ESBL strains were isolated with small rates. Conclusion : Our study results suggest that aminopenicillins, cefaclor and sulfa drug may not be useful as first line empirical antibiotics to treat pediatric patients with community UTI in Korea. But, 3rd generation cephalosporin such as cefixime can be used as effective second line antibiotics after primary treatment failure, also may be useful as an empirical first line antibiotic. Finally, we conclude that a continuous surveillance study to monitor susceptibility patterns of E. coli in community UTI will be needed for the standard guide lines of empirical oral antibiotic treatment.

• Korean Journal of Remote Sensing
• /
• v.25 no.4
• /
• pp.383-389
• /
• 2009

The main objective of the research is a feasibility study on the intertidal zone using a X-band radar satellite, TerraSAR-X. The TerraSAR-X data have been acquired in the west coast of Korea where large tidal flats, Ganghwa and Yeongjong tidal flats, are developed. Investigations include: 1) waterline and backscattering characteristics of the high resolution X-band images in tidal flats; 2) polarimetric signature of halophytes (or salt marsh plants), specifically Suaeda japonica; and 3) phase and coherence of interferometric pairs. Waterlines from TerraSAR-X data satisfy the requirement of horizontal accuracy of 60 m that corresponds to 20 cm in average height difference while current other spaceborne SAR systems could not meet the requirement. HH-polarization was the best for extraction of waterline, and its geometric position is reliable due to the short wavelength and accurate orbit control of the TerraSAR-X. A halophyte or salt marsh plant, Suaeda japonica, is an indicator of local sea level change. From X-band ground radar measurements, a dual polarization of VV/VH-pol. is anticipated to be the best for detection of the plant with about 9 dB difference at 35 degree incidence angle. However, TerraSAR-X HH/TV dual polarization was turned to be more effective for salt marsh monitoring. The HH-HV value was the maximum of about 7.9 dB at 31.6 degree incidence angle, which is fairly consistent with the results of X-band ground radar measurement. The boundary of salt marsh is effectively traceable specifically by TerraSAR-X cross-polarization data. While interferometric phase is not coherent within normal tidal flat, areas of salt marsh where the landization is preceded show coherent interferometric phases regardless of seasons or tide conditions. Although TerraSAR-X interferometry may not be effective to directly measure height or changes in tidal flat surface, TanDEM-X or other future X-band SAR tandem missions within one-day interval would be useful for mapping tidal flat topography.

• Journal of Korean Philosophical Society
• /
• v.117
• /
• pp.275-301
• /
• 2011

Die Einzelwissenschaften, zum Beispiel, die Biologie, die Psychologie, Soziologie behandeln heuzutage den Menschen. Aber sie alle behandeln den Menschen nach ihren eigenen Gesichtpunkten. Infolgedessen $k{\ddot{o}}nnen$ die Einzelwissenschaften den ganzen Menschen als den Menschen nicht $ber{\ddot{u}}ksichtigen$. Jhre Anthropologien $m{\ddot{u}}{\ss}en$ daher weitgehend $beschr{\ddot{a}}nkt$ bleiben. Dagegen entwickelte Max Scheler im letzten Jahrhundert eine neue philosophische Anthropologie. Seine Anthropologie ist wirklich neu und grundgehend. Diese Anthropologie bestimmt den Menschen als Geist, Freiheit, Person. Aber Max Scheler betont allzusehr "den Geist" in seiner philosophischen Anthropologie und infolgedessen distanzierter sich vom "Leben" in seinem $Menschenverst{\ddot{a}}ndnis$. Die Verfasserin sieht hier in dieser philosophischen Anthropologie einen Dualismus zwischen den Geist und das leben. Und Verfasserin findet eine Integration von Geist und Leben in der ontologischen Anthropologie bei Edith Stein. Diese ontologische Anthropologie charakterisiert sich $folgenderma{\ss}en$. 1. Es ist eine Anthropologie des "$Ge{\ddot{o}}ffnet$-Seins." 2. Es ist eine Anthropologie des "$Gef{\ddot{u}}hlt$-Seins." 3. Es ist eine Anthropologie des "Einheits-Seins." Die Verfasserin behauptet infolgedessen die ontologische Anthropologie bei Edith Stein sei eine geeignete und $sachm{\ddot{a}}{\ss}ige$ Anthropologie.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.84-87
• /
• 2018

Purpose The radiopharmaceutical used in the nuclear medicine department is used only for the specific patient according to the prescription or instruction of the doctor without selling, so it is dispensed and it is distributed and used for the examination. Radiopharmaceuticals administered to patients should be managed appropriately as well as radiation safety management during dispensation. The purpose of this study is to investigate microbial contamination during dispensation of radiopharmaceuticals Materials and Methods This study distinguished between general workbench and clean workbench and performed three tests. First, microbial cultivation test of radiopharmaceutical prepared and dispensed in general workbenches and sterile workbenches were carried out five times, respectively. The second test was performed settle plate method three times before and after the use of the exhaust filter. Finally, Adenosine Triphosphate (ATP) measurement was performed in each workbench to measure bacterial counts. In addition, ATP measurement were carried out by designating locations and items that may be contaminated during dispensation. Results In the microbial culture test, no microorganisms were detected in both samples. In the settle plate method, it was detected without using of the exhaust filter in a general workbench once. In the ATP measurement test, it was measured at the level of 400 RLU or less, which is the standard value of contamination, in both workbenches surface. In additional ATP measurement test, the refrigerator handle in the distribution room was measured above the reference value of 1217 RLU, the vacuum vial shield of the Tech Generator at 435 RLU, and the syringe holder at 1357 RLU. After environmental disinfection, the results were reduced to 311 RLU, 136 RLU, and 291 RLU. Conclusion No contamination by bacteria was found in both workbenches. However, microbial contamination may occur if the use of an exhaust filter or proper hand hygiene is not achieved. Regular inspections and management for aseptic processing themselves will be necessary.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.100
• /
• pp.22-49
• /
• 2021

Bowonsa Temple (普願寺) is located to the north of Gayasan Mountain in Unsan-myeon, Seosan-si, Chungcheongnam-do Province. The cultural properties it enshrines were produced during the late Unified Silla and early Goryeo periods, and include an Iron Seated Buddha. The Japanese Government-General of Korea Museum planned a survey on historical remains in Chungcheongnam-do Province during the early Japanese colonial era, and a field survey was conducted at the Bowonsa Temple site in 1916 (Taishō 5). During this survey, the sculpture of the Iron Seated Buddha (knee: width 212 cm x thickness 167 cm) was found enshrined in a hut. The sculpture was moved to Gyeongbokgung Palace in the following year. However, it is clear that the colossal Iron Seated Buddha was being housed at the Bowonsa Temple site at the start of the Japanese colonial era. This Iron Seated Buddha is presumed to have been produced in 955 by State Preceptor Beopin Tanmun (法印國師 坦文, 900-975). Tanmun was born into an influential family that produced many high officials. He became a leading figure in the Hwaeom (Flower Garland) school of Buddhism under the patronage of King Taejo. He also led Buddhist events at the Goryeo royal court during the reigns of King Hyejong (惠宗, r. 943-945) and King Jeongjong (定宗, r. 945-949). With the emergence of Gyunyeo (均如, 923-973), who was sponsored by Queen Daemok (大穆王后, dates unknown) of the Hwangbo clan (皇甫氏), Tanmun was transferred to Bowonsa Temple far from Kaesong. However, even while there Tanmun strengthened his ties with his supporters under the patronage of the Chungju Yu clan. He appears to have produced this colossal sculpture of Iron Seated Buddha as a prayer for longevity and a happy life for King Gwangjong (光宗, r. 949-975). The inscription on the Stele of State Preceptor Beopin at Bowonsa Temple Site that reads "[I] created a Buddha triad in gold" also suggests the Iron Seated Buddha was produced at Bowonsa Temple. This Iron Seated Buddha is thought to have been enshrined originally in a hall at Building Site No. 3 within the Bowonsa Temple precinct. Since excavations at the temple site have revealed that the temple's main hall was erected in the Joseon period, the Iron Seated Buddha might have been enshrined in a different hall at the time of its creation. It is likely that the sculpture was placed in a hall at Building Site No. 3 since Goryeo-era roof tiles and porcelain have been frequently excavated there and the remains of a square Buddhist altar have survived at the site. At the time of its creation, the Iron Seated Buddha was likely enshrined in a Goryeo-era hall at Building Site No. 3 but was transferred to the main hall during a rebuilding project undertaken at Bowonsa Temple in the Joseon period.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.4
• /
• pp.279-289
• /
• 2021

BACKGROUND: Recently, the golden apple snail, Pomacea canaliculata has been used as an environmentally-friendly weed-control agent in rice farming. Although effective for this particular style of farming, P. canaliculata can be destructive to other crops. The objective of this study was to identify overwintering as well as regional and seasonal distribution characteristics of P. canaliculata. Notably, winter is typically fatal for P. canaliculata. However, owing to increasing average global temperatures, we assessed the ability of P. canaliculata to survive through uncharacteristically warm winters. METHODS AND RESULTS: To examine the distribution and overwintering regions of P. canaliculata, We conducted a survey from April 2020 to May 2021 on environmentally-friendly rice fields, agricultural waterways, and streams in 23 cities belonging to 8 provinces. In addition, because air temperature may influence the distribution density of P. canaliculata, we analyzed the winter temperature data (http://weather.rda.go.kr). CONCLUSION(S): In 2021, overwintering of P. canaliculata (1-3 individuals/m²) was observed in the Goheung and Yeongam regions in Jeonnam. Overwintering of P. canaliculata was observed in fewer regions in 2021 than in 2020; this fact may be attributed to the lower minimum temperatures measured in 2021 (approximately 8℃ lower) than those in 2020. Our results suggest that overwintering occurs as long as overnight temperatures are ≥ -15℃, but can take place if temperatures are as low as -19℃.

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.119-127
• /
• 2016

The current disinfection method of vehicles being applied in South Korea has various shortcomings. So, the epidemic has generated continuously at livestock farms. It is very important to develop an effective disinfection system for reduction of the epidemic. And various basic data is required for this development. Therefore, this study was performed to identify the nozzle type and proper discharge pressure of sprayers. The experiment was conducted from January 10, 2012 until February 28, 2012. All the performance measurement experiments were repeated five times. The subjects of experiment were the A, B and C company's products. The sprayed capacity, angle of spray and the covering area ratio were measured for each product. As a result, the sprayed capacity, angle of spray and the covering area ratio were increased as the discharge pressure of the sprayer was increased. In conclusion, the conical shaped of the nozzle is considered more appropriate than V-shaped, and the proper discharge pressure is expected to be at least 20kg/㎠.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.3
• /
• pp.115-132
• /
• 2008

Metal industry is one of the most representative heavy industries and the median sales volume of steel and nonferrous metal companies is over one billion dollars in the case America [Forbes 2006]. As seen in the recent business market situation, an increasing number of industrial manufacturers and suppliers are moving from adversarial to cooperative exchange attitudes that support the long-term relationships with their customers. This article presents the results of an empirical study of the antecedent factors of business relationships in metal industry of the United States. Commitment has been reviewed as a significant and critical variable in research on inter-organizational relationships (Hong et al. 2007, Kim et al. 2007). The future stability of any buyer-seller relationship depends upon the commitment made by the interactants to their relationship. Commitment, according to Dwyer et al. [1987], refers to "an implicit or explicit pledge of relational continuity between exchange partners" and they consider commitment to be the most advanced phase of buyer-seller exchange relationship. Bonds are made because the members need their partners in order to do something and this integration on a task basis can be either symbiotic or cooperative (Svensson 2008). To the extent that members seek the same or mutually supporting ends, there will be strong bonds among them. In other words, the principle that affects the strength of bonds is 'economy of decision making' [Turner 1970]. These bonds provide an important idea to study the causes of business long-term relationships in a sense that organizations can be mutually bonded by a common interest in the economic matters. Recently, the framework of structural bonding has been used to study the buyer-seller relationships in industrial marketing [Han and Sung 2008, Williams et al. 1998, Wilson 1995] in that this structural bonding is a crucial part of the theoretical justification for distinguishing discrete transactions from ongoing long-term relationships. The major antecedent factors of buyer commitment such as technology, CLalt, transaction-specific assets, and importance were identified and explored from the perspective of structural bonding. Research hypotheses were developed and tested by using survey data from the middle managers in the metal industry. H1: Level of technology of the relationship partner is positively related to the level of structural bonding between the buyer and the seller. H2: Comparison level of alternatives is negatively related to the level of structural bonding between the buyer and the seller. H3: Amount of the transaction-specific assets is positively related to the level of structural bonding between the buyer and the seller. H4: Importance of the relationship partner is positively related to the level of structural bonding between the buyer and the seller. H5: Level of structural bonding is positively related to the level of commitment to the relationship. To examine the major antecedent factors of industrial buyer's structural bonding and long-term relationship, questionnaire was prepared, mailed out to the sample of 400 purchasing managers of the US metal industry (SIC codes 33 and 34). After a follow-up request, 139 informants returnedthe questionnaires, resulting in a response rate of 35 percent. 134 responses were used in the final analysis after dropping 5 incomplete questionnaires. All measures were analyzed for reliability and validity following the guidelines offered by Churchill [1979] and Anderson and Gerbing [1988]., the results of fitting the model to the data indicated that the hypothesized model provides a good fit to the data. Goodness-of-fit index (GFI = 0.94) and other indices ( chi-square = 78.02 with p-value = 0.13, Adjusted GFI = 0.90, Normed Fit Index = 0.92) indicated that a major proportion of variances and covariances in the data was accounted for by the model as a whole, and all the parameter estimates showed statistical significance as evidenced by large t-values. All the factor loadings were significantly different from zero. On these grounds we judged the hypothesized model to be a reasonable representation of the data. The results from the present study suggest several implications for buyer-seller relationships. Theoretically, we attempted to conceptualize the antecedent factors of buyer-seller long-term relationships from the perspective of structural bondingin metal industry. The four underlying determinants (i.e. technology, CLalt, transaction-specific assets, and importance) of structural bonding are very critical variables of buyer-seller long-term business relationships. Our model of structural bonding makes an attempt to systematically examine the relationship between the antecedent factors of structural bonding and long-term commitment. Managerially, this research provides industrial purchasing managers with a good framework to assess the interaction processes with their partners and, ability to position their business relationships from the perspective of structural bonding. In other words, based on those underlying variables, industrial purchasing managers can determine the strength of the company's relationships with the key suppliers and its state of preparation to be a successful partner with those suppliers. Both the supplying and customer companies can also benefit by using the concept of 'structural bonding' and evaluating their relationships with key business partners from the structural point of view. In general, the results indicate that structural bonding gives a critical impact on the level of relationship commitment. Managerial implications and limitations of the study are also discussed.