• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.5
• /
• pp.371-375
• /
• 2000

In this paper a new conductivity modulated power transistor called the Lateral Insulated Gated Bipolar Transistor which included n+ ring and p-channel gate is presented. A new lateral IGBT structure is proposed to suppress latch-up and to improve turn off time by imploying n+ ring and p-channel gate and verified by MEDICI. The simulated I-V characteristics at $V_{G}$=15V show that the latch up occurs at $V_{A}$=18V and 6.9$\times$10$^{-5}$ A/${\mu}{\textrm}{m}$ for the proposed LIGBT while the conventional LIGBT latches at $V_{A}$=1.3V and 1.96${\mu}{\textrm}{m}$10$^{-5A}$${\mu}{\textrm}{m}$. It is shown that turn off characteristic of new LIGBT is 8 times than that of conventional LIGBT. And noble LIGBT is not n+ buffer layer because that It includes p channel gate and n+ ring. Therefore Mask for the buffer layer isn’t needed. The concentration of n+ ring is and the numbers of n+ ring and p channel gate are three for the optimal design.n.n.n.n.

• Advances in environmental research
• /
• v.4 no.4
• /
• pp.247-262
• /
• 2015

The few lignin biomarker studies conducted in tropical environments are hampered by having to use references signatures established for plants and soils characteristic of the temperate zone. This study presents a lignin biomarker analysis (vanillyls (V), p-hydroxyls (P), syringyls (S), cinnamyls (C)) of the dominant plant species and soil horizons as well as an analysis of the interrelated terrigenous organic matter (TOM) dynamics between vegetation and soil of the $Tapaj{\acute{o}}s$ river region, an active colonization front in the Brazilian Amazon. We collected and analyzed samples from 17 fresh dominant plant species and 48 soil cores at three depths (0-5 cm, 20-25 cm, 50-55 cm) from primary rainforest, fallow forest, subsistence agriculture fields and pastures. Lignin signatures in tropical plants clearly distinguish from temperate ones with high ratios of Acid/aldehyde of vanillyls ((Ad/Al)v) and P/V+S. Contrary to temperate environments, similarly high ratios in tropical soils are not related to TOM degradation along with pedogenesis but to direct influence of plants growing on them. Lignin signatures of both plants and soils of primary rainforest and fallow forest clearly distinguish from those of non-forested areas, i.e., agriculture fields and pastures. Attalea speciosa Palm trees, an invasive species in all perturbed landscapes of the Amazon, exhibit lignin signatures clearly distinct from other dominant plant species. The study of lignin signatures in tropical areas thus represents a powerful tool to evaluate the impact of primary rainforest clearing on TOM dynamics in tropical areas.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.131-143
• /
• 1994

For maintenance of exposed implant in healthy state, it is necessary to treat the surface of implant fixture and provide the surface adjustable to surrounding tissues. Variable techniques have been introduced such as citric acid and air-abrasive system to treat the failed implant. Although when the rough surface of HA coated implant was exposed to oral environment, the surface treatment method with citric acid or air-abrasive system is effective for removal of bacterial endotoxin, it is unsuccessful to prevent plaque deposition due to difficulty in removal of rough surface of HA coated implant. Thus, in this study the method that removes bacterial endotoxin and makes smooch surface without alteration of surface characteristics was studied. HA coated disc manufactured by IMZ Co. Was treated with high speed diamond bur, low speed diamond bur, stone bur, rubber point, jetpolisher. And then its surface state was examined with profilometer and SEM to evaluate the surface smoothness, and its surface component was analyzed with EDX to evaluate wheter the surface characteristics were altered or not. As a result, following results were obtained. When the surface roughness of each implant disc was measured by profilometer, the group I showed a $R_{max}\;2.11{\mu}m$ and the group II, III, IV, V showed a $R_{max2}\;4.17{\mu}m$, $7.28{\mu}m$, $8.61{\mu}m$ and $39.44{\mu}m$ respectively. That is, surface smoothness was highest in the group I and it has been gradually decreased in the group II, III, IV and V. Under the SEM examination, the group I showed relatively smooth surface and the group II showed slightly rougher surface than the group I due to partially remaining HA particles while most HA particle was removed. The group III and IV showed rough topography due to HA particles that was not grinded, and HA coated surface in group V showed very irregular surface with deep groove and prominence. In cross-sectional view, the group I showed uniform surface, and the group III, IV showed rough surface due to remaining HA particles but the thickness of HA coating was remarkably reduced. The group II has similar pattern in group I, and the group V showed about $40{\mu}m$ thickness although it was not constant. By analysis of surface component with EDX, the group II in which the grinding was effective showed a small quantity of calcium and phosphorous and the group III, IV, in which the grinding was incomplete showed calcium and phosphorus peak. In all experimental group, no other than titanium, aluminum, calcium, phosphorus was observed.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.807-809
• /
• 1998

We give pressure stimulation into organic thin films and detect the induced displacement current, In processing of a device manufacture, we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/organic thin films(Kapton-Polyimide)/Au and I-V properties of the device is measured from 0(V) to +5(V). The maximum value of measured current is increased as the number of accumulated layers are decreased. The resistance for the number of accumulated layers, the energy density for an input voltage show desired results.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1995.04a
• /
• pp.111-111
• /
• 1995

1. 혈압 및 맥박 실험 Acetylcholine과 상엽 수층분획을 단독으로 정맥에 투여한 경우 각각에서 농도 의존적으로 일시적인 혈압 강하 효과가 나타났고 빈맥 현상이 관찰되었다. Nitric Oxide 합성효소 억제제인 N$^{G}$ -Nitro-L-Arginine Methyl Ester(10 mg/kg I. v)를 전처리한 경우 위 두 약물에 의한 혈압강하효과는 공히 증가되어졌다. 또한 두 약물에 의한 혈압강하 효과는 Atropine Sulfate(1 mg/kg i.v) 전처리로 완전히 차단되었다. Cholinesterase 억제제인 Physostigmine (0.05 mg/kg i.v) 전처리는 상엽의 혈압강하 효과에 아무런 영향을 나타내지 못하였다. 2. 장관 실험 Acetylcholine과 상엽 수층분획을 organ bath에 첨가한 경우 각각에서 농도 의존적으로 장관 수축력을 증가시켰다. 혈압반응에서와 같이 장관실험에서도 두 약물에 의한 장관 수축력의 증가는 Atropine Sulfate(1$\times$$10^{-5}$ M)의 존재하에서는 완전히 차단되어졌다. 이상의 결과로부터 상엽 수층분획은 Acetylcholine과 유사한 작용을 지닌 물질을 함유하는 것으로 사료된다.

• Archives of Pharmacal Research
• /
• v.11 no.1
• /
• pp.41-44
• /
• 1988

Several 4-cyano-1-benzofuranyl-1-butanone derivatives were synthesized and screened for potential antiinflammatory and analgesic activities. The effect of structural variation of these molecules on biological activities was systematically examined. Among these compounds $V_a,\;V_c\;and\;VI_e$ were found to demonstrate a significant antiinflammatory effect. Compounds $VI_e,\;V_a,\;I_d,\;I_band\;VII_f$ were also significantly effective as analgesic ones.

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1013-1018
• /
• 1996

The annealing effects of Au/Te/Au/n-GaAs structure was investigated by using x-ray diffraction, scanning electron microscope, the specific contact resistance and I-V measurement. Increasing the annealing temperature, the intensity of Au-Ga peak by X-ray diffraction was increased. The Ga$\_$2/Te$\_$3/peak got evident for the samples annealed at 400.deg. C and GaAs peak by recrystallization appeared for the samples annealed at 500.deg. C. The variation from the schottky to low resistance contact was confirmed by I-V curve. The lowest value of the specific contact resistance of the samples annealed at 500.deg. C was 3.8*10$\^$-5/.ohm.-cm$\^$2/ but the value increased above 600.deg. C.

• Journal of The Korean Astronomical Society
• /
• v.28 no.2
• /
• pp.119-137
• /
• 1995

The $UBVI_{KC}$ CCD photometry was performed in the central region(${\sim}20'{\times}20'$) of the extremely young open cluster IC1805. Member stars were selected in the (B-V)-(U-B) and (V-I)-(B-V) color-color planes. Applying recent stellar evolutionary models, we derived the age, age-spread, and initial mass function(IMF) of the cluster. IC1805 was found to be an extremely young($t_{age}{\sim}1.5Myr$) and has a flat IMF with the slope of ${\Gamma}=-1.0{\pm}0.2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.434-435
• /
• 2005

In this work, the ITO thin films were prepared by FTS (Facing Targets Sputtering) system under different sputtering conditions which were varying $O_2$ gas flow, input current and working gas pressure. As a function of sputtering conditions, electrical and optical properties of prepared ITO thin films were measured. The electrical characteristics, surface roughness and transmittance of the ITO thin films were evaluated by Hall Effect Measurement, AFM, and UV-VIS spectrometer respectively. In addition, I-V properties of OLED cells were measured by 4156A(HP).

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.2
• /
• pp.20-23
• /
• 2012

With continuous development of the 2nd generation HTS conductor, the critical current of the conductor is also increasing. However, many applications require more than 2 conductors in parallel to transport large current. Applications such as HTS power cables and some HTS current leads usually need much larger transport current than that provided by a single conductor and they require more than several tens of HTS conductors. In the case of parallel connection of multiple HTS conductors, the current distribution depends on the contact resistance of each conductor at the terminals for DC operation. The non-uniform distribution of the terminal resistances results in a non-uniform distribution of the current. The resultant current non-uniformity affects on the measurement of the I-V curve and the thermal performance of the multiple conductors. This paper describes the I-V curves obtained from multiply connected HTS conductors with different terminal contact resistances to investigate the relationship between the distorted I-V curve and heat generation.