• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.477-483
• /
• 2003

An independent kinematic hardening material model in which the reverse yielding point is defined by the Bauschinger effect factor (BEF) , has been defined for stainless steel SUS 304. The material model and the BEF are obtained experimentally and represented mathematically as continuous functions of effective plastic strain. The material model has been incorporated in a non-linear stress analysis for the prediction of reverse yielding in thick-walled cylinders during the autofrettage process of these vessels. Residual stress distributions of the independent kinematic hardening material model at the onset of reverse yielding are compared with residual stresses of an isotropic hardening model showing the significant effect of the BEF on reverse yielding predictions. Critical pressures of direct and reverse yielding are obtained for the most commonly used cylinders and a range of permissible internal pressures for an efficient autofrettaged process is recommended.

• 대한수학회보
• /
• 제32권1호
• /
• pp.85-91
• /
• 1995

For a locally compact Hausdorff space, we denote by $C_0(X)$ the Banach space of all continuous complex valued functions defined on X which vanish at infinity, equipped with the usual sup norm. In case X is compact, we write C(X) instead of $C_0(X)$. A well-known Banach-Stone theorem states that the existence of an isometry between the function spaces $C_0(X)$ and $C_0(Y)$ implies X and Y are homemorphic. D. Amir [1] and M. Cambern [2] independently generalized this theorem by proving that if $C_0(X)$ and $C_0(Y)$ are isomorphic under an isomorphism T satisfying $\left\$\mid$ T \right\$\mid$ \left\$\mid$ T^1 \right\$\mid$ < 2$, then X and Y must also be homeomorphic.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.176-179
• /
• 2001

A portable bio-signal measurement system for 24-hours continuous health monitoring of the elderly and the disabled is presented. The measurement system has the functions of acquisition of various bio-signals such as ECG, EMG and EEG, wireless data transmission/receive and adjustment of parameters such as gain and cut-off frequency. The data is sent to a host computer or other device via a Bluetooth. The design targets of the developing system for volume and power consumption are $20{\times}30{\times}5(mm^3)$ and 8mW.

• 대한수학회보
• /
• 제37권2호
• /
• pp.229-247
• /
• 2000

This paper is concerned with the impulsive Cauchy problem where the control function u is a possibly discontinuous vector-valued function with finite total variation. We assume that the vector fields f, $g_i$(i=1,…, m) are dependent on the time variable. The impulsive Cauchy problem is of the form x(t)=f(t,x) +$\SUMg_i(t,x)u_i(t)$, $t\in$[0,T], x(0)=$\in\; R^n$, where the vector fields f, $g_i$ : $\mathbb{R}\; \times\; \mathbb{R}\; \longrightarrow\; \mathbb(R)^n$ are measurable in t and Lipschitz continuous in x, If $g_i's$ satisfy a condition that $\SUM{\mid}g_i(t_2,x){\mid}{\leq}{\phi}$ $\forallt_1\; <\; t-2,x\; {\epsilon}\;\mathbb{R}^n$ for some increasing function $\phi$, then the imput-output function can be continuously extended to measurable functions of bounded variation.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.909-910
• /
• 2007

The volatile organic compounds exposure is governed by the source distance and dispersion of the pollutant into air and groundwater. The purpose of this study was to validate suggested models for the prediction of concentration distributions. The study design was organized into different methods to simulate industry site. The distribution models generally showed a fair agreement with measured data. For graphical representation of concentration of volatile hydrocarbon, it has to obtain a continuous representation of the contamination of the site. Therefore, the used interpolative methods examined for this project are the IDW(inverse Distance Weighting) and kriging method. In the results, in summary, all two different methods can be used to quantify exposures at a particular source area, and thus provide, a solid foundation for making risk-based decisions. All the calculations can be performed using Excel's built-in functions, and the capabilities of geospatial analysis allow the results to be displayed visually. However, anyone who uses these methods should understand all of the assumptions and limitation.

• Structural Engineering and Mechanics
• /
• 제11권4호
• /
• pp.461-468
• /
• 2001

The aim of this work is to establish the coefficient that defines the critical buckling load for isotropic annular plates of variable thickness whose outer boundary is simply supported and subjected to uniform pressure. It is assumed that the plate thickness varies in a continuous way, according to an exponential law. The eigenvalues are determined using an optimized Rayleigh-Ritz method with polynomial coordinate functions which identically satisfy the boundary conditions at the outer edge. Good engineering agreement is shown to exist between the obtained results and buckling parameters presented in the technical literature.

• Nonlinear Functional Analysis and Applications
• /
• 제28권1호
• /
• pp.57-79
• /
• 2023

We investigate the existence and uniform attractivity of solutions of a class of functional integral equations which contain a number of classical nonlinear integral equations as special cases. Using the technique of measures of noncompactness and a fixed point theorem of Darbo type we prove the existence of solutions of these equations in the Banach space of continuous and bounded functions on the nonnegative real half axis. Our results extend and improve some known results in the recent literature. An example illustrating the main result is presented in the last section.

• 충청수학회지
• /
• 제23권4호
• /
• pp.705-710
• /
• 2010

Let $C_1(X)$ be a normed linear space over ${\mathbb{R}}^m$, and S be an n-dimensional subspace of $C_1(X)$ with spaned by {$s_1,{\cdots},s_n$}. For each ${\ell}$- tuple vectors F in $C_1(X)$, the two-sided best simultaneous approximation problem is $$\min_{s{\in}S}\;\max\limits_{i=1}^\ell\{{\parallel}f_i-s{\parallel}_1\}$$. A $s{\in}S$ attaining the above minimum is called a two-sided best simultaneous approximation or a Chebyshev center for $F=\{f_1,{\cdots},f_{\ell}\}$ from S. This paper is concerned with algorithm for calculating two-sided best simultaneous approximation, in the case of continuous functions.

• 센서학회지
• /
• 제1권2호
• /
• pp.147-154
• /
• 1992

본 논문은 생체 신호를 얻기 위한 생체삽입형 8-채널 바이오텔레메트리 시스템을 설계하였다. 본 시스템의 내부회로는 가능한 한 소형이고 저소비 전력화하였을 뿐만아니라 synchronization gap을 주기로 생채신호의 연속측정을 가능하도록 설계하였다. 본 시스템의 주된 기능은 생체신호 연속측정과 외부회로의 적절한 명령에 의해 생체 삽입 전지를 On, off하여 소비전력을 줄일 수 있도록 하였다. 또한 체내 삽입시스템을 집적화하기 위해 람다룰을 기본으로 한 $2{\mu}m$ n-well 설계규칙에 의해 레이아웃을 수행하였다. 그러므로 국내에서 개발되고 있는 압력센서나 ISFET 등을 본 시스템과 함께 삽입하여 생체신호, 즉 심전도, 혈류량, 혈압 등을 측정해 외부로 전송하는 의용 텔레메트리 시스템이 기대된다.

• 한국정보통신학회논문지
• /
• 제8권7호
• /
• pp.1424-1428
• /
• 2004

본 논문에서는 DSL 모뎀의 입출력단에 응용 가능한 수신단의 CMOS 필터를 설계 제안하였다. 제안된 필터는 저전력 특성을 위한 저전압 동작이 가능하며, 저역통과 특성과 고역통과 특성이 혼합된 연속시간 필터 형태로 송신단과 수신단에 위치하여 각종 DSL 시스템에 응용가능하다. 수신단에서 차단주파수는 각각 138kHz와 1.1MHz로서 요구되는 DSL 시스템의 표준 설계사양에 부합하도록 설계하였다. 선형성면에서 개선된 특성을 나타낸 저전압 gmr 방식의 적분기가 필터 설계를 위한 기본블럭으로 이용되었다. 설계된 필터는 0.25${\mu}m$ CMOS n-well 공정 파라미터를 이용한 HSPICE 시뮬레이션을 통해 그 특성이 검증되었다.