• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.387-388
• /
• 2008

In this paper, we have designed and fabricated hyperabrupt varactor diodes. Capacitance variations of hyperabrupt-doped varactor diodes are larger than those of uniform-doped varactor diodes. The measured reverse breakdown voltage of the fabricated varactor diodes was about 20 V. For the anode contact diameter of $50\;{\mu}m$, the maximum capacitance of the fabricated varactor diode was 2.1 pF and the minimum capacitance 0.44 pF. Therefore, the $C_{max}/C_{min}$ ratio was 4.77. Also, for the anode contact diameter of $60\;{\mu}m$, the maximum and minimum capacitances were 2.9 and 0.62 pF, respectively. And, thus, the $C_{max}/C_{min}$ ratio was 4.64.

• ETRI Journal
• /
• 제33권3호
• /
• pp.462-465
• /
• 2011

A millimeter-wave (mm-wave) high-linear low-noise amplifier (LNA) is presented using a 0.18 ${\mu}m$ standard CMOS process. To improve the linearity of mm-wave LNAs, we adopted the multiple-gate transistor (MGTR) topology used in the low frequency range. By using an MGTR having a different gate-source bias at the last stage of LNAs, third-order input intercept point (IIP3) and 1-dB gain compression point ($P_{1dB}$) increase by 4.85 dBm and 4 dBm, respectively, without noise figure (NF) degradation. At 33 GHz, the proposed LNAs represent 9.5 dB gain, 7.13 dB NF, and 6.25 dBm IIP3.

• Journal of Magnetics
• /
• 제20권1호
• /
• pp.47-51
• /
• 2015

We measured radial arterial pulse signals using a prototype of a clip-type pulsimeter equipped with a permanent magnet and a Hall device, which produced signals through a voltage-detecting circuit. The systolic peak time and the reflective peak time for a temporally pulsed signal were analyzed for an arbitrary pulse wave at one position of a small permanent magnet. The measured value of the peripheral pulse wave velocity was about 1.25-1.52 m/s, demonstrating the accuracy of this new method. To measure the peripheral blood flow velocity, we simultaneously connected the radial artery pulsimeter to a photoplethysmography meter. The average value of the peripheral blood flow velocity was about 0.27-0.50 m/s.

• 한국음향학회지
• /
• 제39권4호
• /
• pp.303-317
• /
• 2020

체외충격파치료술(Extracorporeal Shock Wave Therapy, ESWT)은 보존적인 치료가 어려운 근골격계 난치성 통증 치료 뿐 아니라 심혈관계 질환까지 적용 분야가 확대되고 있는 혁신적인 치료술이다. 본 연구에서는 국내에서 사용되는 집속형 ESWT 치료기의 성능을 결정하는 충격파 음향 출력의 분포를 조사했다. 분석에 사용된 데이터는 식약처에 등록된 30개 기술 문서를 통해 수집했다. 조사 결과, ESWT 치료기 충격파의 집속 특성은, 초점 거리가 5 mm ~ 65 mm, 초점 폭이 3 mm ~ 30 mm, 초점 깊이가 4 mm ~ 108 mm 범위에서 변화하고 있다. 충격파의 최대 양압(P+)는 7 MPa ~ 280 MPa, 초점에서 에너지 밀도 Energy Flux Density(EFD)는 0.0035 mJ/㎟ ~ 35 mJ/㎟, 펄스당 에너지(E)는 0.737 mJ ~ 80.86 mJ로 매우 넓은 범위에서 분포하고 있다. P+ 및 EFD 상관성 분석에 포함된 모든 국내산 PE 방식 제품(5개) 및 1개의 EM 방식 국산 치료기는 P+ 및 EFD가 통상적인 범위를 크게 벗어나고 있으며, 예상되는 상관성을 따르지 않고 있어, 데이터의 신뢰성을 인정하기 어려운 상태이다. 음향 출력의 값에 신뢰성을 부여하기 어려운 경우, 식약처에서 인정하는 시험 검사 기관을 통해 사후 시험 검사 및 관리가 요구된다. 충격파 음향 출력에 대한 통과 기준이 치료기의 적응증에 대한 임상 시험 결과를 근거로 설정될 수 있도록 식약처의 규정 및 가이드라인 개선이 필요하다.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권4호
• /
• pp.357-362
• /
• 2012

파랑 관측 자료는 인간이 바다에서 활동을 하는데 있어 아주 중요한 정보임에도 불구하고, 국내에서는 파랑 관측 장비에 대한 기술 개발이나 연구가 부족한 형편이다. 본 연구는 Single GPS를 이용한 파고 관측 자료의 정확한 품질을 평가하기 위해 장기간 비교 관측을 실시하였다. 가속도센서(Hippy-40)와 GPS센서(Mose-1000)의 비교 관측 결과, 유의파고의 상관계수는 0.997이며, 유의파 주기의 상관계수도 0.990으로 거의 일치하고 있다. 또한 BIAS에서도 유의파고는 0.014 m, 유의파주기는 -0.212초로 거의 차이가 없는 것으로 평가되었다. 이러한 결과는 GPS를 이용한 파고 관측 자료의 품질이 아주 우수한 것으로 평가되는 것이다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.765-768
• /
• 2005

In this paper, high LO-RF isolation 94 GHz MMIC single-balanced mixer was designed and fabricated using a branch line coupler and a ${\lambda}/4$ transmission line. The 94 GHz MMIC single-balanced mixer was designed using the 0.1 ${\mu}m$ InGaAs/InAlAs/GaAs Metamorphic HEMT(MHEMT) diode. The fabricated MHEMT was obtained the cut-off frequency($f_T$) of 189 GHz and the maximum oscillation frequency($f_{max}$) of 334 GHz. The designed MMIC single-balanced mixer was fabricated using 0.1 ${\mu}m$ MHEMT MMIC process. From the measurement, the conversion loss of the single-balanced mixer was 23.1 dB at an LO power of 10 dBm. The LO-RF isolations of single-balanced mixer was obtained 45.5 dB at 94.19 GHz. We obtained in this study a higher LO-RF isolation compared to some other balanced mixers in millimeter-wave frequencies.

• 한국해안·해양공학회논문집
• /
• 제27권2호
• /
• pp.142-147
• /
• 2015

동해 중북부에 위치한 대진항 북측 연안에서 7년간 취득한 파랑자료를 스펙트럼법과 파별분석법을 사용하여 분석하고 대표적인 파랑 특성을 검토하였다. 유의파고는 동계에 크고 하계에 작으며, 첨두주기도 동계에 길고 하계에 짧은 특성을 나타내었다. 관측된 최대 유의파고는 6.59 m였으며 1216호 태풍 산바(SANBA)에 의하여 발생되었다. 유의파고와 첨두주기 모두 그 분포 형태를 Generalized Gamma 및 Generalized Extreme Value 분포함수보다는 Kernel 분포함수가 보다 잘 재현하였다. 한편, 인근 해역에서의 설계 및 시공에 도움을 줄 수 있도록 파고 자료를 월별 및 파고구간별로 세분하고 누적출현율을 제시하였다.

• 한국해양공학회지
• /
• 제27권1호
• /
• pp.102-108
• /
• 2013

In this paper time series wave data, which were measured at the Draupner platform in the North Sea on 1995, are used to investigate statistical characteristics of nonlinear wave. Various statistical properties based on time and frequency domain are examined. The Gram-Chalier distribution fits the probability of wave elevation better than the Gaussian distribution. The skewness of wave profile is 0.393 and the kurtosis is 4.037 when the freak wave is occurred. The nonlinearity of D1520 data is higher than two adjacent wave data. AI index of the New Year Wave is 2.11 and the wave height is 25.6m. The zero crossing wave period of the New Year Wave is 12.5s which is compared to the average zero up-crossing period 11.3s. The significant steepness of wave data is 0.077 when the freak wave was occurred. H1/3/${\eta}_s$ does not increases as the kurtosis increases and the values is close to 4. The New Year Wave belongs to highly nonlinear wave data packet but the AI index is within linear focusing range.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.70-86
• /
• 2015

Short crested waves play an important role for planning and design of harbours. In this context a numerical simulation is carried out to evaluate wave tranquility inside a real harbour located in east coast of India. The annual offshore wave climate proximity to harbour site is established using Wave Model (WAM) hindcast wave data. The deep water waves are transformed to harbour front using a Near Shore spectral Wave model (NSW). A directional analysis is carried out to determine the probable incident wave directions towards the harbour. Most critical threshold wave height and wave period is chosen for normal operating conditions using exceedence probability analysis. Irregular random waves from various directions are generated confirming to Pierson Moskowitz spectrum at 20m water depth. Wave incident into inner harbor through harbor entrance is performed using Boussinesq Wave model (BW). Wave disturbance experienced inside the harbour and at various berths are analysed. The paper discusses the progresses took place in short wave modeling and it demonstrates application of wave climate for the evaluation of harbor tranquility using various types of wave models.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.889-901
• /
• 2021

The tension of cables and motion response significantly affect safety of an immersed tunnel element in the immersion process. To investigate those, a hydrodynamic scale-model test was carried out and the model experiments was conducted under wind, current and wave loads simultaneously. The immersion standby (the process that the position of the immersed tunnel element should be located before the immersion process) and immersion process conditions have been conducted and illustrated. At the immersion standby conditions, the maximum force of the cables and motion is much larger at the side of incoming wind, wave and current, the maximum force of Element-6 (6 cables directly tie on the element) is larger than for Pontoon-8 (8 cables tie on pontoon of the element), and the flexible connection can reduce the maximum force of the mooring cables and motion of element (i.e. sway is expecting to decrease approximate 40%). The maximum force of the mooring cables increases with the increase of current speed, wave height, and water depth. The motion of immersed tunnel element increases with increase of wave height and water depth, and the current speed had little effect on it. At the immersion process condition, the maximum force of the cables decrease with the increase of immersion depth, and dramatically increase with the increase of wave height (i.e. the tension of cable F4 of pontoons at wave height of 1.5 m (83.3t) is approximately four times that at wave height of 0.8 m). The current speed has no much effect on the maximum force of the cables. The weight has little effect on the maximum force of the mooring cables, and the maximum force of hoisting cables increase with the increase of weight. The maximum value of six-freedom motion amplitude of the immersed tunnel element decreases with the increase of immersion depth, increase with the increase of current speed and wave height (i.e. the roll motion at wave height of 1.5 m is two times that at wave height of 0.8 m). The weight has little effect on the maximum motion amplitude of the immersed tunnel element. The results are significant for the immersion safety of element in engineering practical construction process.