• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2121-2130
• /
• 2015

In this paper, we analyze LM-MIMO (load-modulation multiple-input multiple-output) system with single RF chain. And then, we confirm that load modulation technique can support generation of high-order m-PSK modulation and m-QAM modulation in LM-MIMO system. Finally we evaluate performance of LM-MIMO system with load modulation. Conventional MIMO system requires a number of RF chains for expansion of MIMO dimension. A number of RF chains can cause various problems. On the other hand, although LM-MIMO system is expanded, LM-MIMO system requires single RF chain only. Therefore, LM-MIMO system has low-complexity and low power consumption. As results, we can confirm that load modulation of T-model can modulate high-order m-PSK and m-QAM singal. Also, we can confirm that $4{\times}4$ LM-MIMO system using load modulation has a similar performance to conventional $4{\times}4$ MIMO system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.417-424
• /
• 2001

This paper proposes new symbol mapping method that can enhance the performance of trellis coded M-ary PSK compared with conventional symbol mapping methods in AWGN environment. Since the basic criteria of TCM design is Maximum Euclidean distance in AWGN, conventional symbol mapping method keep this basic criteria. In this paper, proposed new symbol mapping method uses both Euclidean distance and Hamming distance to design, while conventional methods make use of only optimal Euclidean distance. New symbol mapping method show the better BER performance than the other through computer simulation and error equations.

• Journal of Korean Society for Quality Management
• /
• v.26 no.1
• /
• pp.48-60
• /
• 1998

This paper proposes a fourth generation index $C_{psk}$, constructed from $C_{psk}$, by introducing the factor｜$\mu$-T｜ in the numerator as an extra penalty for the departure of the process mean from the preassigned target value T. The motivation behind the introduction of $C_{psk}$ is that when $T\neqM$ process shifts away from target are evaluated without respect to direction. All indices that are now in use assume normally distributed data, and any use of the indices on non-normal data results in inaccurate capability measurements. In this paper, a new process capability index $C_{psk}$ is introduced for non-normal process. The Pearson curve and the Johnson curve are selected for capability index calculation and data modeling the normal-based index $C_{psk}$ is used as the model for non-normal process. A significant result of this research find that the ranking of the six indices, $C_{p}$, $C_{pk}$, $C_{pm}$, ${C^*}_{psk}$, $C_{pmk}$, $C_{psk}$in terms of sensitivity to departure of the process median from the target value from the most sensitive one up to the least sensitive are $C_{psk}$, $C_{pmk}$, ${C^*}_{psk}$,$C_{pm}$, $C_{pk}$, $C_{p}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.3
• /
• pp.301-309
• /
• 1993

The performance of trellis coded 8-PSK systems over m-distributed fading channel is analyzed. To compensate the performance degradation due to the fading in mobile communication channels, the trellis code which can obtain the coding gain without bandwidth expansion is used. Using the Chernoff bound and generating function techniques for the trellis coded 8-PSK systems with 4-state and 8-state, the upper bound of the bit error probability is derived. The trellis code of 8-state is better than that of 4-state in the capability of error correction. The coded performance is much better under severe fading environment.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.12
• /
• pp.1792-1799
• /
• 1990

Two cases of block coded phase/frequncy modulations are investigated. minimum Euclidean distances are calculated as the function of modulation index h and rotation angle \ulcorner in the cases of 2-FSK/4-PSK and 2-FSK/8-PSK. Method of signal set partitioning is described, especially for the case of 2-FSK/8-PSK. The results are compared with S.I. Sayegh's work and shown better performance. For example, with simple parity check and repetition codes, we can get coding gain of 3 dB in the case of 2-FSK/4-PSK with block length n=4. We get 5.33 dB in the case of 2-FSK/8-PSK with n=4. And it is believed that we can get higher coding gain with proper combinations of block code and n-FSK/m-PSK type channel signal constellations.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.3
• /
• pp.66-72
• /
• 1984

In this paper, the error rate performance of L-level amplitude shift keying (ASK), M-ary phase shift keying (PSK) and amplitude phase keying (APK) systems have been studied in the presence of interference and noise. Using the derived error probability equations, the error rate performance of each L-level ASK and M-ary PSK system has been evaluated in terms of carrier-to-noise power ratio (CNR), carrier-to-interferer power ratio (CIR), and envelope distribution of interferer. These results are combined and then the error rate performance of APK signal has been found. Finally, the error rate performance is compared and discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.2003-2012
• /
• 1996

The 16- and 32-state Trellis-coded M-ary 4-dimensional (4-D) orthogonal modulation scheme with a frequency-reuse technique have been investigated. Here, 5 coded bits form a rate 4/5 convolutional encoder provide 32 possible symbols. Then the signals are mapped by a M-ary 4-D orthogonal modulator, where each signal has equal energy and is PSK modulated. In the M-ary 4-D modulator, we have employed the vectors which is derived by the optimization technique of signal waveforms in a 4-D sphere. This technique is usedin maximizing the minimum Euclidean distance between a set of signal poits on a multidimensional sphere. By combinig trellis coding with M-ary 4-D modulation and proper set-partitioning, we have obtained a considerable impeovement in the free minimum distance of the system over an AWGN channel. The 16-state scheme obtains coding gains up to 5.5 dB over the uncoded two-independent QPSK scheme and 2.5 dB over the two-independent 2-D TCM scheme. And, the 32-state scheme obtains coding gains up to 6.4 dB over the uncoded two-independent QPSK schemeand 3.4 dB over the two-independent 2-D TCM scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.4
• /
• pp.34-40
• /
• 2012

In wireless communication system, fading is an unavoidable problem. Hence, errors in form of BER are introduced with the transmitted signal. It is necessary to recognize the behavior of these errors in different fading channels. To obtain the mathematical solution for the average bit error rate(BER) of coherent MPSK, some techniques are presented. In this paper, the impact of diversity is also analyzed over slow and flat Rician fading channel. In here, the value of modulation index, M is varied and the effects of its variation are also depicted. So, these performance curves with different diversity values and fading parameter are useful to design and evaluate the radio channel for faithful communication system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1258-1268
• /
• 2014

In this paper, we propose and design IBFD system based on DCR. And then, we analyze effect of DC offset by self-interference in the proposed system. Also, we evaluate BER performance of the proposed system according to DC offset. As a result of the simulation, we can confirm that when the self-interference is not completely cancelled by the RF cancellation, linearity of desired signal and self-interference is distorted by DC offset. Also, in the proposed system using m-QAM modulation, DC offsets of multi-level are caused by self-interference with m-QAM modulation. As a result, constellations of desired signal and self-interference are greatly distorted. In contrast, in the proposed system using m-PSK modulation, DC offset of single level is caused by self-interference with m-PSK modulation. In this condition, we confirm that distortion of constellations of desired signal and self-interference is less than when using m-QAM modulation. That is, we can confirm that m-PSK modulation is effective than m-QAM modulation in DCR based IBFD system. Also, we can confirm that it is important to cancel self-interference as much as possible in RF-stage.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.594-609
• /
• 1998

In this dissertation, a new process capability index $C_{psk}$ is introduced for non-normal process. The Pearson curve and the Johnson curve are selected for capability index calculation and data modeling the normal-based index $C_{psk}$ is used as the model for non-normal process. A significant result of this research find that the ranking of the seven indices, $C_p,\;C_{pk},\;C_{pm},\;C^{\ast}_{pm},\;C_{pmk},\;C_s,\;C_{psk}$ in terms of sensitivity to departure of the process median from the target value T=M from the most sensitive one up to the least sensitive are $C_{psk},\;C_{s},\;C_{pmk},\;C^{\ast}_{pm},\;C_{pm},\;C_{pk},\;C_p$. i.e, By the criteria adopted for evaluation of PCI's $C_{psk}$ is the most sensitive to the departure of the process median from target and $C_p$ is least