• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.877-890
• /
• 2005

This study was carried out to determine the effect of different growing stages of winter cereal crops on the quality of silage materials and silages. Silages were made from the silage materials harvested at four growing stages(boot, heading, flowering, and yellow ripe) of barley, rye, oat, and wheat. Approximately 1 kg of silage materials harvested from each growing stage stored in vinyl bags with vacuum packing method and fermented at room temperature for 40 days. As the growing stages progressed, the moisture and crude protein contents of the silage materials decreased, and fiber contents(NDF, ADF and hemicellulose) increased. All the silage materials showed significantly higher contents of water soluble carbohydrate in the boot stages than in the flowering and yellow ripe stages. There was no tendency in acetic acid contents of silage materials cut at different growing stages. The overall pH of silage materials were in the range of 5.91-6.01, and there was no significant difference among growing stages. Buffering capacity of silage materials were in the range of 26.23-29.47meq/100g DM, and showed a tendency to decline as the growing stages proceeded. The moisture and crude protein contents of silages decreased significantly in all species as the growing stages proceeded, and the fiber contents vice versa. As the growing stages proceeded, the pH of the silages tended to increase, and the acetic, butyric, and lactic acid contents tended to decrease. The buffering capacity of silages had a tendency to decrease as the growing stages of winter cereal crops proceeded. Therefore, these features described above should be taken into consideration in order to make silages from winter crops economically.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.3
• /
• pp.274-279
• /
• 1989

The objective of the study was to determine optimum clipping time, interval and height of Suwon 1 pearl millet hybrid in Korea to increase forage yield and quality. Clipping height 20 cm above the ground surface was the best resulting in producing 11.1 tons per hectare of green chop. However, clipping height 5 cm was not good for regrowth of the ratoon crop. Just after the first cutting when the plant height reached two meters around mid-July, four weeks cutting interval was the best for higher forage yield of 11. 4 tons per hectare. Crude protein content of the clipping height 20 cm was the highest being 12.8 percent. Dry matter of the first cut contained 14 percent of crude protein being the highest, and with lower crude fiber content of 24 percent. And also four weeks cutting interval was the highest in crude protein content being 13.1 percent along with lower crude fiber content of 24.2 percent. Thus, the forage yield depended on clipping height greatly, but the quality was dependent upon clipping time, interval and frequency more than cutting height pearl millet plant. It would be desirable for higher yield and quality of Suwon 1 pearl millet hybrid to cut three or four times during the growing season at 20 cm clipping height and at four weeks clipping interval from the first cut when the canopy height is above one meter under the Korean environmental conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.303-310
• /
• 2007

Sweetpotato shoot tops (leaves, tips and petioles) are known to be very useful parts as vegetables because of their high nutritive values and great biomass yield. In this study, the phenolic compound contents, antibacterial activity, mutagenic activity, and antimutagenic activity were investigated in sweetpotato tips that were 10-15cm of shoot top including stems, petioles and tender leaves after sprout of storage roots. The study was done by extracting sweetpotato tips with 80% ethanol and the ethanol fraction was re-extracted with hexane, chloroform, ethyl acetate, butanol and water. In ethyl acetate and butanol fractions, total phenolic compounds contained 95. 6mg/g extract and 69.3 mg/g extract, respectively, The antibacterial activity was measured using the paper disk method with concentrations of 1, 2, 5 and 10 mg/disk of butanol and ethyl acetate fractions against L. monocytogenes and S. Typhimurium strains. Higher doses of solvent extracts showed the higher antibacterial activities. In addition, 5, 10 and 20 mg/mL of the extracts were tested to determine the antibacterial activity in liquid culture. The sweetpotato leaf extract by ethyl acetate showed 1 log reduction compared to control after 24 hrs on Listeria monocytogenes, but 20 mg/ml of butanol extract completely inhibited the growth of the pathogen after 12 hrs. The extracts from ethyl acetate or butanol on Salmonella Typhimurium did less than 1 log reduction during cultivation compared to control. The numbers of S. Typhimirium TA98 and TA100 revertant colonies were 29-33 and 159-188 CFU/plate, respectively, indicating that solvent extracts were no mutagenic activity. The antimutagenic test was performed by adding direct mutagen 2-NF and MMS, and butanol and ethyl acetate showed antimutagenic effect. Thus, this study showed that sweetpotato tips had high phenolic contents and both antimicrobiol and antimutagenic properties. Sweetpotato tips would be good nutritive source because of their high nutrient content without any toxicity in consuming.

• Economic and Environmental Geology
• /
• v.42 no.2
• /
• pp.121-131
• /
• 2009

The distribution characteristics of heavy metals for surface sediments in east oceanic dumping area (EDA) and west oceanic dumping area (WDA) are evaluated by grain sizes, minerals, sedimentation rates and compositions of heavy metals. The mean grain sizes in EDA and WDA range from $7.95{\Phi}$ to $8.51{\Phi}$ and $7.42{\Phi}$ to $8.15{\Phi}$, respectively. These are mostly belonging to the M (mud) type. Minerals in the surface sediments consist of illite with chlorite, smectite, and kaolinite. Sedimentation rates estimated by $^{210}Pb$ method in EDA and WDA are 1.11 mm/yr$\sim$1.73 mm/yr and 1.87 mm/yr, respectively. According to the interrelationship, concentrations of Ni, Cu, Cr, and Zn are closely associated with mean grain size, Al, and Fe, whereas concentrations of Cd and Pb are poorly associated with ones. The enrichment factors of these elements are higher than 1.5, suggesting that the concentrations of Cd and Pb in the surface sediments are affected by anthropogenic sources. The $I_{geo}$-class numbers of Cd and Pb in the surface sediments are mostly classified in 2 to 4, showing moderate to strongly polluted. These numbers in EDA are higher than that of WDA, and the highest number is 4, indicative of the strongly polluted class. Our results show that the disposed wastes at EDA include mineralogical wastes, dredged materials from sewage disposals, and sludges from constructions having materials of WDA. The annual amount of oceanic dumping in EDA is double than that in WDA.

• Journal of fish pathology
• /
• v.18 no.1
• /
• pp.39-48
• /
• 2005

Pathogenicity of Vibrio tapetis, the causative bacterium of 'brown ring disease (BRD)' was evaluated in Manila clams (Ruditapes philippinarumi by artificially 0.1 $m\ell$ infection of $1.0\times10^5$cells and $1.0\times10^8$ cells at 20 $^{\circ}C$. A PCR assay based on 16S rRNA to detect the bacteria in clam tissues was established. Accumulative mortality of clams infected with $1.0\times10^7$cells and $1.0\times10^4$ cells per an individual of the bacteria was 67.5% and 7.5%, respectively. However, the deposit of brown pigment in the inner shells by accumulation of chonchiolin was not found. The bacteria were not be able to re-isolate from the infected clams by the conventional agar plate method but were easily detected by PCR assay established in this experiment. In clams artificially infected with 10 species of Vibrio, a 414bp for V. tapetis was detected in PCR assay. The specific band in the clams infected with $1.0\times10^4$cells per an individual of V. tapetis was detected only in gills one day after the infection but never be found in any tissues including gills three days after the infection. In the case of clams infected with $1.0\times10^8$cells per an individual of V. tapetis the specific band was detected in gills and intestine one day after the infection, in all tissues three days after the infection, and then in gills and adductor muscle nine days after the infection. The PCR assay was applied to detect V. tapetis in manila clam, surf clam (Mactra veneriformis), oyster (Crassostrea gigas) and Thomas' rapa whelk (Rapana venosa) taken from Taean and Gochang from April to July 2004. The infection rates were detected to 23.1% and 9.4% in the oyster and surf clam, while manila clam and Thomas' rapa whelk were not found.

• Korean Journal of Ecology and Environment
• /
• v.50 no.1
• /
• pp.79-95
• /
• 2017

Euiam and Paldang Reservoirs have often been facing water quality problems, such as eutrophication, algal blooms and off-flavors by treated wastewater effluent (TWE) in the North-Han and the Han River basins, but little is examined on the direct biological effect of TWE. This study tested algal growth potential (AGP) of four TWEs discharged into Euiam and Paldang Reservoirs to evaluate water fertility in September 2014 and March and September 2015. Test alga was used Anabaena circinalis isolated from Paldang Reservoir. Mean concentration of T-N and T-P in TWEs was $3,956.7{\mu}g\;N\;L^{-1}$ and $50.8{\mu}g\;P\;L^{-1}$, and the proportion of $NO_3-N$ and $PO_4-P$ to the total fraction was 72.1% and 40.8%, respectively. Both N and P were high in TWEs, but much higher N than P concentration indicates strong P-limitation. As a consequence, the maximum AGP was determined by $PO_4-P$ concentration (r=0.998, p<0.01). Mean AGP value was $15.4mg\;dw\;L^{-1}$ among four effluents indicating its eutrophic condition. Due to the establishment of tertiary (advanced T-P) treatment method in the studied plants recently, P concentration was significantly decreased in TWEs compared to the years prior to 2012. However, P concentration seems to be still high enough to cause eutrophication and algal blooms. Therefore, wastewater treatment to P-free level needs to be considered if effluents are directly discharged into the drinking water resources.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.2
• /
• pp.81-86
• /
• 2013

'Mogwoo', a new high yield and whole crop silage rice (Oryza sativa L.) cultivar, was developed by the rice breeding team of the National Institute of Crop Science, RDA, Suwon, Korea, from 1999 to 2009, and was released in 2010. It was derived in 1999 from a cross between Dasanbyeo, having a high yield, and Suweon431/IR71190-45-2-1. A promising line, SR25848-C99-1-2-1, selected by the pedigree breeding method, was designated the name of 'Suweon 519' in 2007. This cultivar has about 155 days of growth period from seeding to heading, and is tolerance to lodging, with erect pubescent leaves as well as a long and thick culm. This cultivar has the same number of tillers per hill and higher spikelet numbers per panicle compared to Nokyang. 'Mogwoo' has longer leaves compared with other Tongil-type varieties. This new variety is resistant to grain shattering, leaf blast, bacterial leaf blight, and small brown planthopper. The biomass yield of 'Mogwoo' was 1,956 kg/10a in a regional test over three years. The result shows that 'Mogwoo' is adaptable to central and south-east plain areas of Korea.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.80-88
• /
• 2003

Object The purpose of this study were to evaluate the microtensile bond strength of resin fiber reinforced post to radicular dentin using resin cement according to various dentin surface treatment and to observe the inter face between post and root dentin under SEM Material and Method A total 16 extracted human single rooted teeth were used. A lingual access was made using a #245 carbide bur in a high-speed handpiece with copious air water spray. The post space was mechanically enlarged using H-file(up to #60) and Gates Glidden bures(#3). This was followed by refining of the canal space using the calbrating drill set provided in ER Dentinpost(GEBR, BRASSELER GmbH&Co. KG). The 16 teeth were randomly distributed into 4 group of 4 teeth. Group 1 teeth had their post space prepared using 10% phosphoric acid as root canal surface treatment agent during 20s. The canal was then rinsed with saline and dried with paper point. Group 2 teeth had their post space prepared using 3% NaOCl as root canal surface treatment agent during 30min. The canal was then rinsed with saline and dried with paper point. Group 3 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. The canal was then rinsed with saline and dried with paper point. Group 4 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. After rinsing with saline, the canal was rinced 10m1 of 3% NaOCl for 30min. After drying with paper point, the post(ER Dentinpost, GEBR, BRASSELER GmbH&Co. KG) was placed in the treated canals using resin cement. Once the canal was filled with resin cement(Super bond C&B sunmedical co. Ltd.), a lentulo was inserted to the depth of the canal to ensure proper coating of the root canal wall. After 24 hours, acrylic resin blocks($10{\cdot}10{\cdot}50mm$) were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strengths for each stick was measured with Microtensile Tester. Failure pattern of the specimen at the interface between post and dentin were observed under SEM. Results 1. Tensile bond strengths(meen{\pm}SD$) ) were expressed with ascending order as follows group 4, $12.52{\pm}6.60$ ; group 1, $7.63{\pm}5.83$ ; group 2, $4.13{\pm}2.31$ ; group 3, $3.31{\pm}1.44$. 2. Tensile bond strengths of Group 4 treated with 17% EDTA +3%NaOCl were significant higher than those of group 1, 2 and 3 (p<0.05). 3. Tensile bond strengths of Group 1 treated with 10% phosphoric acid were significant higher than those of group 2 (p<0.05). Tensile bond strengths of Group 4 treated with 17% EDTA +3% NaOCl was significant higher than those of other groups.

• Journal of Embryo Transfer
• /
• v.20 no.2
• /
• pp.105-112
• /
• 2005

The present study was conducted to examine some factors affecting in vitro development of oocytes from somatic cell nuclear transfer (SCNT) in Korean native goats. Recipient oocytes were surgically collected after superovulation by using CIDR and FSH, PMSG, hCG and estrous synchronization in Korean Native goats. For nuclear transfer, the fibroblasts from caprine ear cells and fetal fibroblasts were surgically harvested and were cultured in vitro until cell confluency in serum-starvation condition (TCM-199 + $0.5\%$ FBS) for 3 to 5 days. The zona pellucidae of matured oocytes were partially drilled by laser irradiation. A single somatic cell was individually transferred into each enucleated oocyte. The reconstructed oocytes were then electrically fused and activated. Activated NT embryos were cultured in mSOF medium supplemented with $0.8\%\;BSA\;6\~7\;day\;at\;39^{\circ}C,\;5\%\;CO_2,\;5\%\;O_2,\;90\%\;N_2$ in air. There were no significant difference in the number of embryos cleaved and 4-cell development between the fibroblast nuclei from mature ear cells and fetal cells, but the rate of 8-cell development was higher (P<0.05) in ear cells $(40.5\%)$ than in fetal cells $(55.5\%)$. However, the embryo development to morula or blastocyst was not significantly different between both the groups$(6.7\%\;vs\;16.0\%)$, respectively. The number of embryo cleaved $(79.0\%)$ were higher (P<0.05) in the oocytes activated with ionomycin+6-DMAP than in the oocytes activated electrically $(9.5\%)$. The development of fused embryos to morula or blastocyst was found $15.6\%$ in ionomycin+6-DMAP, but no morula or blastocysts were developed in electrical stimulation. The development rate of SCNT embryos to morula or blastocyst was love. (P<0.05) in SCNT embryos $(19.0\%\;vs\;0.0\%)$ than that in parthenotes $(66.1\%\;vs\;59.1\%)$. In the parthenotes, the cleavage rate and development to morula or blastocyst were significantly higher (P<0.05) as $86.8\%\;and\;50.0\%$ in ovulated oocytes than in follicular oocytes $(69.0\%\;vs\;23.6\%)$, respectively. These results suggest that some factors Including superovulation treatment, oocyte source, maturation of follicular oocytes, activation method and culture condition may affect in vitro developmental capability of embryos produced by somatic cell nuclear transfer in Korean Native goats, and the fusion rate be greatly low compared with other species.

• Journal of Internet Computing and Services
• /
• v.16 no.2
• /
• pp.49-55
• /
• 2015

According to the statistics of traffic accidents over recent 5 years, traffic accidents during the night times happened more than the day times. There are various causes to occur traffic accidents and the one of the major causes is inappropriate or missing street lights that make driver's sight confused and causes the traffic accidents. In this paper, with smartphones, we designed and implemented a lane luminance measurement application which stores the information of driver's location, driving, and lane luminance into database in real time to figure out the inappropriate street light facilities and the area that does not have any street lights. This application is implemented under Native C/C++ environment using android NDK and it improves the operation speed than code written in Java or other languages. To measure the luminance of road, the input image with RGB color space is converted to image with YCbCr color space and Y value returns the luminance of road. The application detects the road lane and calculates the road lane luminance into the database sever. Also this application receives the road video image using smart phone's camera and improves the computational cost by allocating the ROI(Region of interest) of input images. The ROI of image is converted to Grayscale image and then applied the canny edge detector to extract the outline of lanes. After that, we applied hough line transform method to achieve the candidated lane group. The both sides of lane is selected by lane detection algorithm that utilizes the gradient of candidated lanes. When the both lanes of road are detected, we set up a triangle area with a height 20 pixels down from intersection of lanes and the luminance of road is estimated from this triangle area. Y value is calculated from the extracted each R, G, B value of pixels in the triangle. The average Y value of pixels is ranged between from 0 to 100 value to inform a luminance of road and each pixel values are represented with color between black and green. We store car location using smartphone's GPS sensor into the database server after analyzing the road lane video image with luminance of road about 60 meters ahead by wireless communication every 10 minutes. We expect that those collected road luminance information can warn drivers about safe driving or effectively improve the renovation plans of road luminance management.