• Journal of the Korean Magnetics Society
• /
• v.13 no.2
• /
• pp.59-63
• /
• 2003

Superparamagnetic properties of self-aggregated cobalt nanoparticles in the perfluorinated ion-exchange polymeric membrane (MF-4SK) prepared by ion-exchange and recovery methods were investigated by transmission electron microscopy (TEM) and superconducting quantum interference device (SQUID) magnetometer at various temperatures. Our experimental results show that cobalt nanoparticles in MF-4SK for the concentration of $7.8{\times}10^{19}$ atoms per 1 g of polymer membrane exhibit superparamagnetic properties above the average blocking temperature ($T_{B}$), which is determined to be around 185 K at applied field of 500 Oe. The average particle radius of 4.0 nm achieved from Langevin function fit is in good agreement with TEM observations. This experimental evidence suggests that cobalt nanoparticles in polymer film obey a single domain theory. The results are discussed in the light of current theory for the superparamagnetic behavior of magnetic nanoparticles.

• Journal of the Korean Magnetics Society
• /
• v.23 no.5
• /
• pp.154-158
• /
• 2013

We have analyzed the magnetization curves measures by using VSM and MOKE in synthetic antiferromagnetic coupled CoB/Ru/CoB thin film. The measured results were compared with calculated ones by Stoner-Wohlfarth model based on the magnetization behavior of two ferromagnetic layers ($M_1$, $M_2$). The calculated total magnetization ($M_{tot}=M_1+M_2$) and single layer magnetization($M_1$) behaviors were compared with measured results by using VSM and MOKE, respectively. The total magnetization curve ($M_{tot}=M_1+M_2$) showed reversible magnetization behavior with flopping field of about 50 Oe. While single layer magnetization ($M_1$) behaviors showed irreversible magnetization behavior in the field range of $H_F$ < H < $H_F$. These magnetization behaviors were explained by the angle difference between magnetization directions of two ferromagnetic layers in SAF sample.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.852-853
• /
• 2011

통상적으로 전기기기에 사용되는 전기강판의 자기특성은 B-H 자기특성 곡선을 이용하여 표현되어졌고, 이를 이용하여 전기기기의 자계 분포 해석 및 특성 해석이 이루어져 왔다. 그러나 실제로 전기기기의 전기강판은 인가 자계의 방향에 따라 자기특성이 다르게 나타나고, 자속밀도와 자계세기의 방향이 다르게 나타나는 벡터 자기특성을 가지기 때문에, B-H 곡선과 같은 스칼라 자기 특성으로 전기강판의 자기 특성을 정확히 표현하는 것이 불가능하다. 따라서 전기기기의 정확한 자계 해석 및 특성 해석을 위해서는 전기강판의 벡터 자기특성이 반드시 고려되어야 한다. 본 논문에서는 전기강판의 벡터 자기특성이 전기기기의 자계 분포 해석에 미치는 영향을 알아보고자 하며, 전기강판의 벡터 자기특성의 고려를 위해 ($B_m,\theta_B$)법을 이용하였으며 간단한 형태의 단상 변압기 모델에 유한요소 해석을 적용하였다.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.19-26
• /
• 2002

The purpose of this paper is to study the fundamental characteristics of bicycle flows. Several experiments were conducted to obtain the characteristics of bicycle flows, speed variation along a curve radius, bicycle driver's travelling territory and saturation flow rate at signalized intersection. Bicycle facilities are categorized into uninterrupted and interrupted, the capacity of uninterrupted is approximately 5000bic/h, and that of the interrupted (at signalized intersection) is approximately 3000bic/h, when a curve radius is over 20m, bicycle speed is not increasing. Bicycle driver's travelling territory is used to occupancy area, it is the same concept as pedestrian's. Bicycle occupancy area is to be divided into circulation zone, comfort zone. and collision zone. Circulation zone is over 2.21$\times$4.1m and collision zone is less than 0.96$\times$2.47m. Comfort zone is defined as intermediate state between two zones.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1273-1274
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.381-382
• /
• 2011

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.111-116
• /
• 2002

Electrochemical scanning tunneling microscopy was employed to study the evolution of surface morphology during electrochemical preparation of Si(111)-H from Si(111) oxide. Anodic dark current of cyclic voltammogram in 0.2M $NH_4F$ solution (pH 4.7) decreased as the number of cycles increased and remained nearly constant after the second cycle. Then, the Si(111) oxide was entirely stripped, which was followed by H termination on the Si(111) surface. Hydrides at kink and step sites were etched more rapidly than on the terrace, which remained triangle pits with [112] oriented steps where existed stable monohydride. Then, triangle pits deepened. During chronomamperometry at 0.4V anodic dark current shoulder appeared and decreased slowly, indicated the stripping of Si(111) oxide and the formation of stable (112) oriented steps with monohydride. Additionally, the etching mechanism of Si(111)-H in 0.2M $NH_4F(pH 4.7)$ solution at +0.4V was discussed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.1
• /
• pp.3-10
• /
• 2002

This paper proposes an ID-based entity-aunthentication and authenticated key exchange protocol with ECC via two-pass communications between two parties who airs registered to the trusted third-party KC in advance. The proposed protocol developed by applying ECDSA and Diffie-Hellman key exchange scheme to the ID-based key distribution scheme over ECC proposed by H. Sakazaki, E. Okamoto and M. Mambo(SOM scheme). The security of this protocol is based on the Elliptic Curve Discrete Logarithm Problem(ECDLP) and the Elliptic Curve Diffie-Hellman Problem(ECDHP). It is strong against unknown key share attack and it provides the perfect forward secrecy, which makes up for the weakness in SOM scheme,

• Journal of the Korean Magnetics Society
• /
• v.4 no.4
• /
• pp.335-339
• /
• 1994

The crystallograpic and magnetic properties of $Eu(Fe_{1-x}In_{x})O_{3}$ (x=0, 0.03과 0.05) have been studied by the methods of X-ray diffraction, $M\"{o}ssbauer$ spectroscopy, and magnetic hysteresis measurement at room temperature. The X-ray results show that the samples have a crystal structure of orthorhombic and unit cell volume of the crystal with the exception of the sample of x=0 increases as increasing the In concentration. In the analysis assuming two sets of six-line of $M\"{o}ssbauer$ spectra, it is found that the magnetic hyperfine field in each of sets decreases increasing x. The linewidth of the absorption lines for the samples increased as increasing x. This implies that the data involve a sum of several hyperfine patterns which have intensity being proportional to $_{n}P_{z}(x)$, the probability of an environment with z such Fe neighbors. The magnetic hysteresis curves show decrease of $M_{s}$ and increase of $H_{c}$ of the samples with increasing x.

• Journal of Radiation Protection and Research
• /
• v.22 no.2
• /
• pp.103-109
• /
• 1997

Adult male rats were exposed to a whole body with a single dose of 1.0, 2.0, 3.0, 5.0, and 7.0 Gy. The animals were sacrificed 48, 72, 96 and 216 hours following exposure. A competitive enzyme linked immunosorbent assay(ELISA) with antigen immobilized on the solid phase has been developed to measure ceruloplasmin in rat serum and complete dose response curves. Ceruloplasmin was purified from the plasma of turpentine treated male rats. Coating of ceruloplasmin had more effectiveness in 10 mM Tris-HCI, 150 mM sodium chloride, pH 7.4 than in 50 mM carbonate/bicarbonate buffer, pH 9.6. The coating range for ceruloplasmin was $70{\sim}140ng$/well. Levels of ceruloplasmin increased to maximum on the $72{\sim}96$ hours after irradiation. Slope of between response and dose was greatest value 96 hours following irradiation. Normal ceruloplasmin levels were not recorded 216 hours following exposure. In 0.1 Gy irradiated group, levels of ceruloplasmin also increased to maximum on the $72{\sim}96$ hours following irradiation. The concentration of this protein remained significantly different from control value, 196 hours after exposure. Ceruloplasmin was identified as one of the major acute phase protein following irradiation and further studies about gene expression and regulation would be necessary for radiation protection.