• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.164-172
• /
• 2010

The objective of this research is to assess the level of urban park service provision in comparison to demand population size by region (e.g., dong) in Busan metropolitan areas. To this end, a park service provision assessment index is utilized. The index is built upon the difference between planned and actual levels of park service provision. For each region, planned level is obtained by multiplying the per capita service amount by the number of residents in that region. Actual level is estimated based on Huff model, where distance between parks and residential locations are explicitly accounted for in model building. Empirical analysis was carried out for Busan Metropolitan Area. The result shows that Gumsung-dong, Chunga-dong and Dongdaesin3-dong are well supplied with park service, while Hadan1-dong, Goejung2-dong and Joorae3-dong are under-provided when per capita service provision amount and the extent of service area are set to $6m^2$ and 1km, respectively. It is argued that those regions that suffer from under-provision need to be highlighted such that a priority is given to those areas for establishing new urban parks when renewing urban management plan.

• Journal of the Korean Magnetics Society
• /
• v.18 no.2
• /
• pp.75-78
• /
• 2008

$AB_2X_4$(A, B=Transition Metal, X=O, S, Se) are cubic spinel normal ferrimagnets, in which M ions occupy the tetrahedral sites and Cr ions occupy the octahedral sites. Recently, they have been investigated for behaviour of B site ions and A-B interaction. Polycrystalline $[Co_{0.9}Zn_{0.1}]_A[Cr_{1.98}{^{57}Fe_{0.02}}]_BO_4$ compound was prepared by wet-chemical process. The ferrimagnetic transition was observed around 90K. $M\"{o}ssbauer$ absorption spectra at 4.2K show that the well-developed two sextets are superposed with small difference in hyperfine fields($H_{hf}$). The hyperfine fields of $CoCr_{1.98}{^{57}Fe_{0.02}}O_4$ and $Co_{0.9}Zn_{0.1}Cr_{1.98}{^{57}Fe_{0.02}}O_4$ were determined to be 488, 478 kOe and 486, 468 kOe, respectively. We notice that the one of the magnetic hyperfine field values changes with Zn ion substitution. These results suggest the incommensurate states and spin-reorientation temperature($T_S=18K$) changes with Zn ions substitution below spin-reorientation temperature($T_S=28K$) of $CoCr_{1.98}{^{57}Fe_{0.02}}O_4$

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.327-334
• /
• 2006

In tomato perlite bag culture, the available water content was analyzed for several sorts of perlite so that the irrigation safety was investigated and thus the irrigation strategy controlled by time clock was established. The reduction trends of water content in perlite bags were monitored for tomatoes, of which fruits were harvested until the fifth cluster. The amount of daily reduction of water in the bag was on the decrease as the total water in the bag was decreased. In terms of time interval from when the water content based on weight was reduced more than 50g to when it was dropped again, the longest time interval in a day was retarded gradually. It means plant activity was recovered later than the previous day. The available water content in perlite bag of 40 liters was about 30% which was 12 kg in weight, which satisfied daily water demand of 6 tomato plants. The appropriate time irrigated by time clock was recommended for the case that it was irrigated 5 or 10 times a day with the daily integrated solar radiation of 601 or $1,519W/m^2$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.10a
• /
• pp.134-135
• /
• 2003

The dental implant materials required good mechanical properties, such as fatigue strength, combined with a high resistance to corrosion. For increasing fatigue resistance and delaying onset of stress corrosion cracking, shot peening has been used for > 50 years to extend service life of metal components. However, there is no information on the electrochemical behavior of shot peened and hydroxyapatite(HA) coated Ti-6Al-4V alloys. To increase fatigue strength, good corrosion resistance, and biocompatibility, the electrochemical characteristics of Ti/TiN/HA coated and shot peened Ti-6Al-4V alloys by electron beam physical vapor deposition(EB-PVD) have been researched by various electrochemical method in 0.9%NaCl. Ti-6Al-4V alloys were prepared under the condition of hydrogen and vacuum arc furnace. The produced materials were quenched at 1000$^{\circ}C$ under high purity dried Ar atmosphere and were hold at 500$^{\circ}C$ for 2 hrs to achieve the fatigue strength(1140㎫) of materials. Ti-6Al-4V alloys were prepared under the condition of hydrogen and vacuum arc furnace. Shot peening(SP) and sand blasting treatment was carried out for 1, 5, and 10min. On the surface of Ti-6Al-4V alloys using the steel balls of 0.5mm and alumina sand of 40$\mu\textrm{m}$ size. Ti/TiN/HA multilayer coatings were carried out by using electron-beam deposition method(EB-PVD) as shown Fig. 1. Bulk Ti, powder TiN and hydroxyapatite were used as the source of the deposition materials. Electrons were accelerated by high voltage of 4.2kV with 80 - 120mA on the deposition materials at 350$^{\circ}C$ in 2.0 X 10-6 torr vacuum. Ti/TiN/HA multilayer coated surfaces and layers were investigated by SEM and XRD. A saturated calomel electrode as a reference electrode, and high density carbon electrode as a counter electrode, were set according to ASTM GS-87. The potentials were controlled at a scan rate of 100 mV/min. by a potentiostat (EG&G Co.273A) connected to a computer system. Electrochemical tests were used to investigate the electrochemical characteristics of Ti/TiN/HA coated and shot peened materials in 0.9% NaCl solution at 36.5$^{\circ}C$. After each electrochemical measurement, the corrosion surface of each sample was investigated by SEM.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.5 no.1
• /
• pp.1-10
• /
• 2011

Our study is to verify validation of exercise effect that developing exercise and rehabilitation instrument using pneumatic actuators available rehabilitation and healthcare, while at the same time safer and more convenient for the user to select the desired exercise. Shares subject to the usual exercise is conducted in less than a week in the knee extension and flexion at the undergraduate level there is no more than 10 of the 20 patients were female. Subject performed knee exercise 3 set a day with 12times a set using fluid type exercise instrument and pneumatic exercise instrument that build in this study. Experiment has progressed in 4-weeks with 3-days a week. Our exercise load consist of two type. One is active exercise load with developed instrument in our study and the other one is passive exercise load with fluid instrument. Exercise program based on real-time muscle activation patterns and muscle activity before and after exercise by comparing the effects of exercise for rehabilitation has been verified. The results showed that muscular activity is higher in active exercise load than passive load, and improvement of muscle strength more increased too. Equipment more user-centered exercise more effectively exercise may enhance muscle strength was found. This study can adapt rehabilitation program and exercise for patient and weaker. Also our system can provide easily and convenient prescription of rehabilitation for expert related rehabilitation.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.320-327
• /
• 2016

Allium hookeri is used for food and medical materials in Asia. This study was carried out to elucidate the effects of shading rates on growth and quality of A. hookeri cultivation in greenhouse. Treatments were given with 35%, 55%, 75% and 95% shading rates and non-shading (Control). Photosynthesis photon flux density (PPFD) of control, 35%, 55%, 75%, and 95% shading were 792, 515, 351, 182, and $78.2{\mu}mol{\cdot}m{\cdot}s^{-1}$ respectively. The emergence ratio was 98% under non-shading, 35% and 75% shading condition, and it was 100% under 55% and 95% shading condition on April 20, 2016. These results showed no correlation between emergence rate and shading treatment. When shading net was set up inside at greenhouse, fresh weights in control, 35%, 55%, 75%, and 95% shading treatments were 1,142, 3,511, 5,936, 6,408 and 3,779kg/10a, respectively. When shading net was set up outside at greenhouse, fresh weights in control, 55%, 75%, and 95% shading treatments were 1,372, 5,442, 6,238 and 3,595kg/10a, respectively. Dry weight, percentage of dry matter, number of leavesand branches, plant height and root length in 75% shading treatment were higher than other shading treatments. From these results, we suggested that the proper shading rate in a greenhouse is 75% for A. hookeri cultivation in middle area of Korea.

• Journal of Embryo Transfer
• /
• v.19 no.3
• /
• pp.291-299
• /
• 2004

Characterization of quantitative trait loci (QTL) was investigated in the experimental cross population between Berkshire and Yorkshire breed. A total of 512 F$_2$ offspring from 65 matting of F$_1$ parents were phenotyped the carcass traits included average daily gain (ADG), average backfat thickness (ABF), tenth rip backfat thickness (TRF), loin eye area (LEA), and last rip backfat thickness (LRF). All animals were genotyped for 125 markers across the genome. Marker linkage maps were derived and used in QTL analysis based on line cross least squares regression interval mapping. A decision tree to identify QTL with imprinting effects was developed based on tests against the Mendelian mode of QTL expression. To set the evidence of QTL presence, empirical significance thresholds were derived at chromosome-wise and genome-wise levels using specialized permutation strategies. Significance thresholds derived by the permutation test were validated in the data set based on simulation of a pedigree and data structure similar to the Berkshire-Yorkshire population. Genome scan revealed significant evidences for 13 imprinted QTLs affecting growth and body compositions of which nine were identified to be QTL with paternally expressed inheritance mode. Four of QTLs in the loin eye area (LEA), and tenth rip backfat thickness (TRF), a maternally expressed QTL were found on chromosome 10 and 12. These results support the useful statistical models to analyse the imprinting far the QTLs related carcass trait.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.3
• /
• pp.21-31
• /
• 2012

This paper presents the short-term and long-term measures to determine the fugitive dust concentration in a contaminated site, which is a crucial step for the determination of particulate emission factor (PEF) for risk assessment. As a long-term measure, USEPA method employing Q/C value (inverse of the ratio of the geometric mean air concentration to the emission flux at center of a 0.5-acre square source) seems to be suitable as it reflects regional-specific meteorological conditions. However, it requires nation-wide database collection and interpretation. Use of ASTM method is an alternative as a short-term measure. The method is readily field-applicable as PEF calculation equation is simple and input parameters can be easily derived at the site of interest as well without the nation-wide efforts. Using ASTM method, PEF at the Former Janghang Smelter Site was determined. According to various mode of aggregate size distribution and fractions of vegetative cover, which are the most important factors in PEF calculation, PEF values at the Former Janghang Smelter Site varied greatly. When the mode of aggregate size distribution was set at 0.25 mm, PEF values at the Former Janghang Smelter Site was 5~20 times higher than the default PEF value (i.e., 35 ${\mu}g/m^3$) shown in the current Korean Soil Contamination Risk Assessment Guidance. On contrast, when the mode was set at 2 mm, PEF values at the Former Janghang Smelter Site was 160~640 times lower than the default PEF value in the Korean Guidance.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.6
• /
• pp.570-578
• /
• 2003

Background : Ambient particles during Asian dust events are usually sized less than $10{\mu}m$, known to be associated with the adverse effects on the general populations. But, there has been no considerable evidence linking these particles to the adverse effects on airways. The objectives of this study was to investigate the possible adverse effects of Asian dust events on respiratory function and symptoms in subjects with bronchial asthma. Patients and Methods : From march to June 2002, Asthmatic patients who were diagnosed with bronchial challenge test or bronchodilator response were enrolled. We divided them into three groups; mild, moderate, and severe, according to the severity. Subjects with other organ insufficiency such as heart, kidney, liver, and malignancy were excluded. All patients completed twice daily diaries and recorded peak flow rate, respiratory symptom, and daily activity. Daily and hourly mean pollutant levels of particulate matter < $10{\mu}m$ in diameter($PM_{10}$), nitrogen dioxide($NO_2$), sulphur dioxide($SO_2$), ozone($O_3$) and carbon monoxide(CO) were measured at the 10 different monitoring sites. Results : Dust events occured 14 times during the study period. Daily averages of 4 air pollutant were measured with an increased level of $PM_{10}$, decreased level of $NO_2$ and $SO_2$, and no change in CO during dust days compared to those during control days. An increase in $PM_{10}$ concentration was associated with an increase of subjects with PEF variability of >20% (p<0.05), night time symptom(p<0.05), and a decrease in mean PEF (p<0.05), which were calculated by the longitudinal data analysis. Otherwise, there was no association between $PM_{10}$ level and bronchodialtor inhaler, and daytime respiratory symptoms. Conclusion : This study shows evidence that ambient air pollution, especially $PM_{10}$, during Asian dust events, could be one of the many aggravating factors at least in patients with airway diseases. This data can be used as a primary source to set up a new policy on air environmental control and to evaluate the safety of air pollution index. We also expect that this research will help identify precise components of dust, which are more linked to the adverse effects.

• Journal of Environmental Science International
• /
• v.29 no.10
• /
• pp.989-996
• /
• 2020

This study was conducted to determine the effect of low temperature and low radiation conditions on the yield and quality of hot pepper at an early growth stage in Korea. In plastic greenhouses, low temperature, low temperature with covered shading treatments were set 17 to 42 days after transplanting. The pepper growing degree days decreased by 5.5% due to the low temperature during the treatment period. Radiation decreased by 74.7% due to the covered shading. After commencing treatments, pepper plant growth decreased with low temperature and low radiation. Analysis of the yield showed that the first harvest was delayed by low radiation. The cumulative yields of 119 days after transplanting were 1,956, 2,171, and 2,018 g/㎡ for control, low temperature, and low temperature with low radiation respectively. Capsaicin and dihydrocapsaicin concentrations in pepper fruit decreased with low temperature and low radiation. To investigate the photosynthetic characteristics according to the treatment, the carbon dioxide reaction curve was analyzed using the biochemical model of photosynthesis. Results showed that the maximum photosynthetic rate, V_cmax (maximum carboxylation rate), J (electric transportation rate), and TPU (triose phosphate utilization) decreased at low temperatures; the maximum photosynthetic rate, J, and g_m (dark respiration rate) were reduced by shading. These results indicate that low temperature and low radiation can retard early growth, yield, and quality, but these can also be recovered 119 days after planting. Based on the results, the yield and quality of pepper can recover from abiotic stresses with proper cultivation.