• Journal of Internet Computing and Services
• /
• v.22 no.6
• /
• pp.129-140
• /
• 2021

The next generation mBcN should be built to cooperate with the wireless network to support hyper-speed and hyper-connectivity. In this paper, we propose a network architecture for the cooperation mBcN and 5G commercial network and architecture of the cooperative security gateway required for the cooperation. The proposed cooperative security gateway is between gNB and UPF to support LBO, SFC, and security. Our analysis shows that the proposed architecture has several advantages. First of all, user equipment connected with the mBcN can be easily connected through the 5G commercial radio network to the mBcN. Second, the military application traffic can be transmitted to mBcN without going through the 5G core network, reducing the end-to-end transmission delay without causing the traffic load on the 5G core network. In addition, the security level of the military application can effectively be maintained because the user equipment can be connected to the cooperative security gateway, and the traffic generated by the user equipment is transmitted to the mBcN without going through the 5G core network. Finally, we demonstrate that LBO, SFC, and security modules are essential functions of the proposed gateway in the 5G test-bed environment.

• Journal of the military operations research society of Korea
• /
• v.33 no.2
• /
• pp.87-100
• /
• 2007

The aspect of future warfare is NCW(Network Centric Warfare) in accordance with the IT development, so MND have the planning of M-BcN(Military Broadband convergence Network) establishment as the basic system of NCW by the end of 2008. IPv6 address must be managed systematically as a essential element of NCW. In the previous study, it is designed on the basis of the present military information communication network topology. However, it makes some problems. First, it is difficult for present topology to adapt the future M-BcN which is different from the present military network topology. Second, it has defects of inefficiency of route aggregation and enlargement of routing table size. In this paper, we improved the route aggregation and routing table size by assigning the hierarchical address on the basis of M-BcN topology and adjusting the position of field identifying service network. Furthermore, it is proved by the network simulation program(OPNET 12.0).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.1031-1032
• /
• 2007

최근 정보통신기술을 포함한 IT 기술의 발전은 매우 빠른 속도로 전개되어 가고 있으며, 이러한 기술 발전에 힘입어 매우 다양한 형태의 통신단말들이 지속적으로 출현하고 있다. 향후 통신환경은 광대역통합망(BcN)의 발전에 따라 지속적으로 변화되리라 예상되며, 이에 따라 통신단말기술의 발전도 병행되리라 예측된다. 본 논문은 현재까지의 통신단말기술에 대해 유형별로 분류하여 살펴보고, 향후 단말기술의 발전 방향을 조망해보고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.1007-1010
• /
• 2008

최근 통신업계에서 앞으로 가장 주목받을 만한 기술로 BcN(Broadcast Convergence Network)기반 IMS(IP Multimedia Subsystem)를 꼽고 있다. 통신업계는 지금까지 빠른 기술성장과 함께 많은 이익을 창출하였다. 그러나 현재 통신사의 가입자의 수는 물론 ARPU(Average Revenue Per User)역시 정체기를 맞고 있다. 때문에 통신업계들은 BcN환경 기반 IMS구조로 사용자의 요구에 맞도록 차별화된 서비스를 제공함으로써 이익을 창출하고 앞으로도 지속 가능한 성장을 하기 위해 이에 대한 연구를 활발히 하고 있다. 하지만 현재 IMS의 구조로는 사용자들에게 차별화된 서비스를 제공하는데 어려움이 있다. 본 논문에서는 사용자들에게 차별화된 서비스를 제공하기 위해 BcN 환경에서 통합 서비스를 제공 하기 위한 전체 Enabler구조와 Enabler에서 상황에 따른 데이터처리 기법에 대해서 제시하고자 한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.1
• /
• pp.41-48
• /
• 2002

This paper presents a 18-mW, 2.5-㎓ fractional-N frequency synthesizer with l-bit $4^{th}$-order interpolative delta-sigma ($\Delta{\;}$\sum$)modulator to suppress fractional spurious tones while reducing in-band phase noise. A fractional-N frequency synthesizer with a quadruple prescaler has been designed and implemented in a $0.5-\mu\textrm{m}$ 15-GHz $f_t$ BiCMOS. Synthesizing 2.1 GHzwith less than 200 Hz resolution, it exhibits an in-band phase noise of less than -85 dBc/Hz at 1 KHz offset frequency with a reference spur of -85 dBc and no fractional spurs. The synthesizer also shows phase noise of -139 dBc/Hz at an offset frequency of 1.2 MHz from a 2.1GHz center frequency.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.5
• /
• pp.472-481
• /
• 2015

Black carbon (BC) aerosols were monitored at the KIST site ($37.603^{\circ}N$, $127.046^{\circ}E$) and Cheonan-KOREATECH site ($36.766^{\circ}N$, $127.281^{\circ}E$) during the pre KORea-US Air Quality Study (KORUS-AQ) campaign using a couple of Muliti Angle Absorption Photometers (MAAP). BC mass concentrations were presented as $2.14{\pm}1.06{\mu}g/m^3$ and $0.94{\pm}0.60{\mu}g/m^3$ at KIST site (Seoul) and KOREATECH site (Cheonan), respectively. BC mass concentrations measured at KIST and KOREATECH sites from 22:00 on May 22 to 12:00 on May 23, 2015 showed 80% and 72% higher than average BC mass concentrations measured during campaign period, respectively. It indicates both sites could be influenced by a remote source. Similar patterns of BC concentrations between two sites from 20:00 to 24:00 on June 6, 2015 implies that the BC could be transported into both sites and then be stagnant inside the Korean Peninsula. Diurnal variation of BC in weekdays and weekends were also presented for the KIST and KOREATECH sites. Morning rush hour peak was observed at KIST site located in metropolitan area though no distinct morning rush hour peak was not observed at KOREATECH site located in a suburban area. This study revealed transport pathways of BC near the Korean Peninsula using back-trajectory analysis of BC measured both in a metropolitan area and in a suburban area.

• Toxicological Research
• /
• v.35 no.1
• /
• pp.45-63
• /
• 2019

In view of the growing industrial use of Bacterial cellulose (BC), and taking into account that it might become airborne and be inhaled after industrial processing, assessing its potential pulmonary toxic effects assumes high relevance. In this work, the murine model was used to assess the effects of exposure to respirable BC nanofibrils (nBC), obtained by disintegration of BC produced by Komagataeibacter hansenii. Murine bone marrow-derived macrophages ($BMM{\Phi}$) were treated with different doses of nBC (0.02 and 0.2 mg/mL, respectively 1 and $10{\mu}g$ of fibrils) in absence or presence of 0.2% Carboxymethyl Cellulose (nBCMC). Furthermore, mice were instilled intratracheally with nBC or nBCMC at different concentrations and at different time-points and analyzed up to 6 months after treatments. Microcrystaline $Avicel-plus^{(R)}$ CM 2159, a plant-derived cellulose, was used for comparison. Markers of cellular damage (lactate dehydrogenase release and total protein) and oxidative stress (hydrogen peroxidase, reduced glutathione, lipid peroxidation and glutathione peroxidase activity) as well presence of inflammatory cells were evaluated in brochoalveolar lavage (BAL) fluids. Histological analysis of lungs, heart and liver tissues was also performed. BAL analysis showed that exposure to nBCMC or CMC did not induce major alterations in the assessed markers of cell damage, oxidative stress or inflammatory cell numbers in BAL fluid over time, even following cumulative treatments. $Avicel-plus^{(R)}$ CM 2159 significantly increased LDH release, detected 3 months after 4 weekly administrations. However, histological results revealed a chronic inflammatory response and tissue alterations, being hypertrophy of pulmonary arteries (observed 3 months after nBCMC treatment) of particular concern. These histological alterations remained after 6 months in animals treated with nBC, possibly due to foreign body reaction and the organism's inability to remove the fibers. Overall, despite being a safe and biocompatible biomaterial, BC-derived nanofibrils inhalation may lead to lung pathology and pose significant health risks.

• Korean Journal of Microbiology
• /
• v.29 no.4
• /
• pp.243-249
• /
• 1991

The chromatophore from the chemotrophically grown facultative anaerobic photosynthetic bacterium, Rhodopseudomonas gelatinosa ATCC 17013 was isolated through stepwise sucrose gradient centrifugation. The isolated chromatophore showed high activities of the cytochrome $bc_{1}$ complex and cytochrome c oxidase. The activity of cytochrome $bc_{1}$ complex was completely inhibited by .5$\mu$M antimycin A,10$\mu$M myxothiazol, and that of cytochrome c oxidase was completely inhibited by .$50\mu$M KCM and $100\mu$M $NaN_{3}$but not inhibited by carbon monoxie. The activity of cytochrome c oxidase of th chromatophore was increased by addition of ionophores or protonophores. The reduced-oxidised difference sspectrum of cytochrome $bc_{1}$ complex isolated by affivity chromatography showed the absorption maxima at 553 nm(shoulder at 547 nm), 520 nm, and 418.5 nm, on the other hand, that of cytochrome c oxidase showed .alpha., .betha. and soret peaks at 554 nm, 523 nm, and 421 nm, respectively. The cytochrome c oxidase from chemotrophically grown Rhodopseudomonas gelatinosa seems to be a b-type cytochrome c oxidase.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.117-124
• /
• 2008

In this paper, the call setup performance of the CSCF(Call Session Control function) that manages the session control in providing the IMS(IP Multimedia subsystem)-based multimedia service in the BcN(Broadband convergence Network) is analyzed. While the performance related with the call/session of the SIP-Based voice service is analysed, the study for the call recessing performance of the IMS-based multimedia service is insufficient. In this paper, as, the processing capacity and subscriber number of CSCF were changed, the call setup delay time according to the session setup procedure of IMS was measured using the M/M/1 queuing model and OPNET simulation. The experimental results show that the sudden increased delay showed up in case the session establishment requirement ratio of total users over 13% of the CSCF processing capacity. Therefore, the user number and capacity of CSCF suitable for the session establishment delay threshold can be calculated or estimated.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.313-323
• /
• 2017

Objectives: This study aimed to assess exposure to black carbon(BC) among forklift operators and to identify environmental and occupational factors influencing their BC exposure. Methods: We studied a total of 23 forklift operators from six workplaces manufacturing paper boxes. A daily BC exposure assessment was conducted during working hours from January to April 2017. A micro-aethalometer was used to monitor daily BC exposure, and information on work activities was also obtained through a time-activity diary(TAD) and interviews. BC exposure records were classified into four categories influencing BC exposure level: working environment, workplace, forklift operation, and job characteristics. Analysis of variance(ANOVA) was used to compare average BC exposure levels among the four categories and the relationships between potential factors and BC exposure were analyzed using a multiple linear regression model. Results: The operators' daily exposure was $12.9{\mu}g/m^3$(N=9,148, $GM=7.5{\mu}g/m^3$) with a range: $0.001-811.4{\mu}g/m^3$. The operators were exposed to significantly higher levels when they operate a forklift in a room ${\leq}20,000m^3$($AM=12.3{\mu}g/m^3$), in indoor workplaces($AM=16.3{\mu}g/m^3$), when they operate a forklift manufactured before 2006 ($AM=13.2{\mu}g/m^3$), a forklift with a loading limit of four-tons($AM=27.1{\mu}g/m^3$), with a roll and bale type clamp($AM=17.1{\mu}g/m^3$), and with no particulate filter($AM=15.7{\mu}g/m^3$). Conclusions: Occupational factors including temperature, smoking, season, daytime, room volume($m^3$), location of operating, and manufacturing era and model of forklift influenced the BC exposure of forklift operators. The results of this study can be used to minimize the BC exposure of forklift operators.