• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.741-744
• /
• 2001

In this study, a OFDM mode, unlike traditional single carrier mode, is that a great number of carrier in multi-channel environment is transmitted by modulating objective Data parallel in order to execute high speed Data translation and make frequency orthogonal to offer high spectrum efficiency. As a result, this method is adopted to a variety of fields and is being actively studied. In this papers, the efficiency of OFDM wireless-communication systems is evaluated by modulation methods through computer simulation. M-PSK and M-QAM are used as modulation methods. The simulation is executed in a real channel and a virtual channel included multi-path, AWGN, Peak Power clipping, Frame Start Time Error As a result of simulation, it is confirmed that M-QAM method is superior to M-PSK in OFDM systems in terms of the transmission methods.

• Fire Science and Engineering
• /
• v.17 no.2
• /
• pp.56-61
• /
• 2003

The smoke removal rate from a room with an opening was investigated for different smoke control systems by using the large eddy simulation turbulence model of the Fire Dynamics Simulator. The decreasing rate of the particles randomly distributed in the 2m X 2m X 2.4m room was com-pared for the ventilation system, pressurization system and extraction system, and for the air flowrate of the ventilation system. Difference in the smoke removal rate among the three smoke control systems was small when the opening was closed. The pressurization system showed less smoke removal rate than the other two systems when the opening existed, and hence is not recommended for subway stations with large openings. It was also shown that a less flowrate in the ventilation system leads to a much longer smoke removal time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.251-256
• /
• 2001

In this study, a OFDM mode, unlike traditional single carrier mode, is that a great number of carrier in multi-channel environment is transmitted by modulating objective Data parallel in order to execute high speed Data translation and make frequency orthogonal to offer high spectrum efficiency As a result, this method is adopted to a variety of fields and is being actively studied. In this papers, the efficiency of OFDM wireless-communication systems is evaluated by modulation methods through computer simulation. M-PSK and M-QAM are used as modulation methods. The simulation is executed in a real channel and a virtual channel included multi-path, AWGN, Peak Power clipping, Frame Start Time Error. As a result of simulation, it is confirmed that M-OAM method is superior to M-PSK in OFDM systems in terms of the transmission methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3B
• /
• pp.196-201
• /
• 2002

OFDM(orthogonal Frequency Division Multiplex) modulates transmitting data with many carriers in parallel. As a result, high-speed data transmission is carried out and high spectral efficiency is provided by overlapping orthogonal frequencies. Therefore, OFDM is applied to many communication systems. In this paper, according to modulation methods(M-PSK and M-QAM), coded-OFDM wireless communication is simulated. Turbo code is used and two channels(virtual and real channel) are used. both channels have multipath delay spread, Gaussian noise, and peak power clipping. As a result of the simulation, coding gain is about 3dB and it is proved that M-QAM modulation is better than M-PSK. Start after striking space key 2 times.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.74-82
• /
• 2007

The M-Method that measures the speed of actuator with counting the number of Reaction wheel Tacho Pulse has the many advantages such that a realization is simple and measuring time is uniform, but it also has the disadvantage that measuring speed becomes worse as the wheel speed goes lower. On the contrary, the T-Method that measures the time duration between the pulses is more accurate at lower-speed and its time delay is smaller than M-Method, but its realization is more difficult than M-Method because measuring time is varying with wheel speed variation. Thought M/T Method mixing M-Method with T-Method is widely used in order to measure the speed in the motor industrial area, one of two methods has been used in the spacecraft design area. Therefore, we try to apply both methods together to measuring the speed of Reaction Wheel, the core actuator for low earth orbit satellite. This paper provides the Reaction Wheel simulation board located in the Spacecraft Dynamic Simulator, ground support test set.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1996.11a
• /
• pp.221-225
• /
• 1996

D. Chaum은 묵지가 내장된 봉투를 사용하는 실제적인 상황을 수식으로 표현한 은닉 서명방식을 제안하였다. 이 방식은 메시지를 숨기는 서명 방식으로 제공자의 신원과 메시지를 연결시킬 수 없는 익명성을 유지할 수 있다. 또한 M. Stadler 둥은 전자화폐에서의 돈 세탁 문제를 해결하는 공정한 은닉 서명방식을 제안하였다. 본 논문에서는 비밀키의 일부를 공개함으로써 은닉 서명을 제공자의 신원과 연결시킬 수 있는 "linkable 은닉 서명방식"을 제안한다. 또한, M. Stadler 등의 공정한 은닉 서명방식이 linkable 은닉 서명방식의 한 종류임을 살펴보고, 공정한 은닉 서명방식의 문제점과 해결방안을 제시한다.결방안을 제시한다.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.98-104
• /
• 2003

Smoke control in il space 10 m${\times}$3 m floor and 5.4 m high around the stairway of a subway station platform was simulated by using FDS to investigate problems of smoke control in Daegue subway stations. Distributions of temperature and smoke particles, and variation of the number of particles with time for a 200 ㎾ polyurethane fire were compared. It was shown that the purge system fails to remove smoke efficiently and that the extraction system has the highest perfor-mance among the three smoke control systems for the given situations. Simply switching the purge system into extraction mode might improve much the smoke removal performance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.7 no.2
• /
• pp.19-26
• /
• 1997

In this paper, we propose an RSA multisignature scheme with no bit expansion in which the signing order is not restricted. In this scheme we use RSA moduli with the same bit length. the most 1 bits of which are same. The proposed scheme is based on these RSA moduli and a repeated exponentiation of Levine and Brawley. Kiesler and Harn first utilize the repeated exponentiation technique in their multisignature scheme, which requires 1.5m exponentiations for signing, where m is the number of signers. However, the proposed scheme requires (equation omitted) m exponentiation. So if l is sufficiently large (l $\geq$ 32), then we can neglect the vaue (equation omitted

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1494-1500
• /
• 1999

In order to provide high speed multimedia data rate service, Multi-Code CDMA has been proposed which converts high speed serial data stream into N parallel low speed data streams with orthogonal PN codes for spreading. However this signal has multi level and causes interferences to be increased at the neighboring cell boundary in the reverse link. Therefore in order to solve the above mentioned problem, M/B-MC/CDMA, in which multi level signal is converted to binary level signal using M/B conversion, is proposed and the performance is compared with MC-CDMA.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.125-125
• /
• 2019

현재 국내 논벼 수요량 산정방법은 수정 Penman방식에 의한 증발산량을 계산하여 구하고 있다. 증발산량 산정은 여러 가지 방식에 의해 산정될 수 있으나, 유엔의 식량농업기구 (FAO, Food and Agriculture Organization of the United Nations)에서는 작물 수요량 산정에 수정 Penman 공식을 사용할 경우 증발산량이 과다산정 되는 점을 지적하여, 건조 및 습윤 기후에서 비교적 정확하고 일정한 경향을 나타내는 Penman-Monteith(P-M)공식을 사용하도록 추천하였다. 이에 따라 국내 기상청 및 농촌진흥청에서도 증발산량 산정에 P-M공식을 적용하기 시작했으며, 이와 더불어 농촌진흥청에서는 P-M 추정법에 따른 벼를 포함한 주요 작물의 생육단계별 작물계수(Kc)를 제안하였다. 따라서 본 연구에서는 논용수 공급지구 8곳을 선정하여 대상지구별로 기존의 수정 Penman 방식과 P-M 방식을 적용한 경우의 증발산량 차이와 이에 따른 논벼 수요량 변화를 분석해 보았다. 그 결과, 수정 Penman 공식을 적용한 경우에 비해 P-M공식을 적용한 경우 증발산량이 모두 감소하는 경향을 나타내었다. 증발산량 산정방법 변화에 따른 대상지구별로 증발산량 결과값의 변화는 모두 비슷하게 나타났다. P-M방식을 적용했을 경우 잠재증발산량은 11.1%~14.9%(평균 12%)로 감소하였으며, 작물계수를 적용한 실제증발산량의 경우에도 3.8~5.1%(평균 4.6%) 감소하는 경향을 보였다. 이에 따른 논벼 수요량의 변화도 실제증발산량의 변화와 비슷한 감소 경향을 보였다. 다음으로 P-M방식을 채택한 경우의 논벼 수요량의 생육시기별 변화를 조사해 본 결과, 이앙기 수요량은 2.1%~6.3% (평균 4.4%)로 증가하다가, 본답기에는 수요량이 5.1%~11.3%(평균 8.4%)로 감소하였다. 전반적인 증발산량은 본답기 수요량 감소분이 이앙기 수요량 증가분보다 더 크기 때문에 감소경향을 나타낸 것으로 파악되었다. 또한 이앙기 수요량과 본답기 수요량의 증감의 경향이 다르게 나타난 것은 증발산량 산정방식의 변화에 따른 생육시기별 작물계수의 차이로 인한 변화로 파악되었다. 논벼 수요량은 농업용수 공급계획 수립의 주요기준이 되는 인자이므로, P-M방식 적용에 따른 논벼 수요량의 산정결과에 대해 보다 면밀한 검토가 필요할 것으로 사료된다.