• Journal of the Korea Concrete Institute
• /
• v.12 no.6
• /
• pp.43-50
• /
• 2000

In this paper, a new splicing method was applied to design the girder section of bridges with the span length of 25m, 30m, 35m, 40m and 45m. A U-type precast prestressed section was also determined for each bridge. Additionally, the sectional area, beam depth and Guyon's efficiency factor of the spliced U-type sections in each span were analyzed in comparison with the present I-type PSC bridges. As a result, in spite of an increase of 31%∼50% in the sectional areas compared with the I-type precast girders, the spliced U-type the beam depth of the spliced U-type girder was designed as 2,050 mm compared with the I-type precast girder of 2,600mm in a 40m span bridge. The sectional efficiency factors of the spliced U-type sections were analyzed as 0.76∼0.99. It shows that the spliced U-type sections ar of a superior structural efficiency in contrast to the average sectional efficiency factor of 0.66 value in the I-type girders.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.3
• /
• pp.467-476
• /
• 2017

In this paper, we analyze Generalized Feistel Network(GFN) Type I, Type II, Type III that round function use SP update function, secret S-box and $k{\times}k$ MDS matirx. In this case an attacker has no advantage about S-box. For each type of GFN, we analyze and restore secret S-box in 9, 6, 6 round using the basis of integral cryptanalysis with chosen plaintext attack. Also we restore secret S-box in 16 round of GFN Type I with chosen ciphertext attack. In conclusion, we need $2^{2m}$ data complexity and ${\frac{2^{3m}}{32k}},{\frac{2^{3m}}{24k}},{\frac{2^{3m}}{36k}}$ time complexity to restore m bit secret S-box in GFN Type I, Type II, Type III.

• Journal of the Korean Society of Safety
• /
• v.21 no.5 s.77
• /
• pp.46-52
• /
• 2006

The purpose of this paper is to investigate the removal efficiency of fine dusts as the configuration condition of machinery and equipments in Clean Room and to analyze the flowing behaviors of fine dusts as the layout of Clean Room. The layout of the Clean Room was classified into side layout type, 2 center line type and center concentration type layout, and the flow rates used in this research were 0.22m/s, 0.44m/s and 0.80m/s. Dust removal efficiency as layout change was decreased 37% for side layout type, 31% for 2 center line type and 20% for center concentration type layout at the flow rate of 0.22m/s, compared with the state without machinery and equipments in Clean Room. The efficiency was decreased 42% for side layout type, 22% for 2 center line type and 8% for center concentration type layout at the flow rate of 0.44m/s, and decreased 20% for side layout type, 18% for 2 center line type and 10% for center concentration type layout at the flow rate of 0.80m/s. According to the result of dust removal behavior, $0.3{\mu}m,\;1{\mu}m\;and\;3{\mu}m$ dust except for $5{\mu}m$ showed the higher change of the behavior in side layout type than in center concentration type layout due to the change of air flow. It was confirmed that removal behavior depends on the layout of machinery and equipments as the dust size decreases.

• Journal of the Korean Magnetics Society
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2014

$Co_2Z$-type barium ferrites ($Ba_3Co_2Fe_{24}O_{41}$) were synthesized using variation method. First, M-type, $Co_2Y$-type and $Co_2Z$-type synthesized by hydrothermal method. Second, M- and Y-type precursors for synthesis of $Co_2Z$ hexaferrite by hydrothermal and ball milling method. the morphology, structure and magnetic properties of the barium ferrite particles were characterized using XRD, FESEM, VSM, impedance. As a result, Single phase of M-type and $Co_2Y$-type were obtained. Manufactured powders of M+Y ball milling, M+Y hydrothermal were similar to single phase of $Co_2Z$-type hexaferrite, all powders were obtained theoretical magnetization (50 emu/g). The largest initial permeability were obtained $Co_2Z$ hexaferrite synthesized by reagent precusor, With increasing calcination temperature was lowered the initial permeability. In another synthesis didn't almost that little change could be found.

• Journal of the Korea Construction Safety Engineering Association
• /
• s.41
• /
• pp.80-87
• /
• 2007

The purpose of this paper is to investigate the removal efficiency of fine dusts as the configuration condition of machinery and equipments in Clean Room and to analyze the flowing behaviors of fine dusts as the layout of Clean Room. The layout of the Clean Room was classified into side layout type, 2 center line type and center concentration type layout, and the flow rates used in this research were 0.22m/s, 0.44m/s and0.80m/s. Dust removal efficiency as layout change was decreased 37% for side layout type, 31% for 2 centerline type and 20% for center concentration type layout at the flow rate of 0.22m/s, compared with the state without machinery and equipments in Clean Room. The efficiency was decreased 42% for side layout type,22% for 2 center line type and 8% for center concentration type layout at the flow rate of 0.44m/s, and decreased 20% for side layout type, 18% for 2 center line type and 10% for center concentration type layout at the flow rate of 0.80m/s. According to the result of dust removal behavior, $0.3\mum$, $1\mum$and $3\mum$dust except for $5\mum$showed the higher change of the behavior in side layout type than in center concentration type layout due to the change of air flow. It was confirmed that removal behavior depends on the layout of machinery and equipments as the dust size decreases.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.26-52
• /
• 1987

Among the diffuse-porous woods which arc dominant in Korea and used as construction materials due to their wood quality, ten species of six genus involving seven species of three genus in Betulaceae were studied on the radial variation of structural demenb. The species studied were Betula platyphylla var. japonica, B. ermanii, B. davurica, B. scstata, B. schmidtii, Carpinus laxifora, Alnus japonica, Prunus sargentii. Acer mono and Diospyros kaki. Wood fiber, vessel elements and ray increased rapidly in size from pith to a certain annual ring. After then the radial variation in size of the main structural elements seemed to be divided into three types; levelled off curve pattern indicating constant size(type I), continuously increasing curve pattern showing ever increase in size (type II) and parabolic curve pattern showing the gradual decrease after the maximum (type III), but the variation types by structural dements were different even in the same species. Based on the results from this study, it appears to be reasonable to consider the stabilized age of wood fiber, vessel elements and ray rather than considering wood fiber length in distinguishing mature woods from juvenile woods.

• Journal of Environmental Impact Assessment
• /
• v.16 no.6
• /
• pp.533-542
• /
• 2007

The general characteristics of fine particle and meteorological analysis of high $PM_{10}$ concentration day which was over $100{\mu}g/m^3$ in busan were investigated for period of 2002 to 2006. Annual mean concentration including Asian dust day was $68.7{\mu}g/m^3$ in 2002, $54.6{\mu}g/m^3$ in 2003, $60.4{\mu}g/m^3$ in 2004, $58.3{\mu}g/m^3$ in 2005 and $58.8{\mu}g/m^3$ in 2006, respectively. Seasonal mean concentration was $73.4{\mu}g/m^3$ in Springtime, $56.8{\mu}g/m^3$ in Summertime, $55.5{\mu}g/m^3$ in Wintertime and $54.4{\mu}g/m^3$ in Falltime, respectively. Mean concentration for land use was 69.2 $37.0{\mu}g/m^3$ in industrial area, 64.2 $35.5{\mu}g/m^3$ in rural area, 62.6 $34.4{\mu}g/m^3$ in commercial area and 55.3 $33.8{\mu}g/m^3$ in residential area, respectively. Frequency of synoptic pattern for high $PM_{10}$ concentration day was 18 days(16.7%) in I type, 27 days(25.0%) in II type, 10 days(9.3%) in III type, 5 days(4.6%) in IV type, 13 days(12.0%) in V type and 29 days (26.9%) in VI type, respectively. Frequency of long range transport sector for high $PM_{10}$ concentration day was 9 days(8.3%) in I type, 64 days(59.5%) in II type, 34 days(31.5%) in III type, 1 days in IV type, 0 days, respectively.

• The Korean Journal of Physiology and Pharmacology
• /
• v.5 no.6
• /
• pp.511-519
• /
• 2001

Nimopidine, one of dihydropyridine derivatives, has been widely used to pharmacologically identify L-type Ca currents. In this study, it was tested if nimodipine is a selective blocker for L-type Ca currents in sensory neurons and heterologous system. In mouse dorsal root ganglion neurons (DRG), low concentrations of nimodipine $(<10\;{\mu}M),$ mainly targeting L-type Ca currents, blocked high-voltage-activated calcium channel currents by ${\sim}38%.$ Interestingly, high concentrations of nimodipine $(>10\;{\mu}M)$ further reduced the 'residual' currents in DRG neurons from ${\alpha}_{1E}$ knock-out mice, after blocking L-, N- and P/Q-type Ca currents with $10\;{\mu}M$ nimodipine, $1\;{\mu}M\;{\omega}-conotoxin$ GVIA and 200 nM ${\omega-agatoxin$ IVA, indicating inhibitory effects of nimodipine on R-type Ca currents. Nimodipine $(>10\;{\mu}M)$ also produced the inhibition of both low-voltage-activated calcium channel currents in DRG neurons and ${\alpha}_{1B}\;and\;{\alpha}_{1E}$ subunit based Ca channel currents in heterologous system. These results suggest that higher nimodipine $(>10\;{\mu}M)$ is not necessarily selective for L-type Ca currents. While care should be taken in using nimodipine for pharmacologically defining L-type Ca currents from native macroscopic Ca currents, nimodipine $(>10\;{\mu}M)$ could be a useful pharmacological tool for characterizing R-type Ca currents when combined with toxins blocking other types of Ca channels.

• Journal of Aquaculture
• /
• v.9 no.3
• /
• pp.187-194
• /
• 1996

Sixteen strains of marine rotifer, Braohionus plicatilis were isolated from salt pond, estuary and lagoon. Among 16 strains, 2 strains were large (L)-type and the others were small (S) or ultra small (US)-type. Four strains of fresh water rotifer, B. calyciflorus were isolated from commercial fish ponds. The size of lorica and resting egg were measured. In B. plicatilis, the range of lorica length from S-type and S-type were $244.3{\~}255.3\;{\mu}m$ and $131.0{\~}165.8\;{\mu}m$, respectively. The major axis of resting egg in the marine rotifer were $93.7\~116.4\;{\mu}m$ for S-type and $142.4{\~}145.5\;{mu}m$ for L-type, respectively. In freshwater rotifer, B. calyciflorus, the size range of lorica and major axis of resting egg were $211.8\~229.9\;{\mu}m$ and $126.8\~140.2\;{mu}m$, respectively. The size of freshwater rotifer was larger than that of S-type marine rotifer, but smaller than that of L-type one. Growth and formation of resting egg of B. plicatilis were different among the strains. The maximum density of S-type and L-type rotifer was 753.3 inds./ml for H-S strain and 220 inds./ml for O-L strain, respectively. The largest production of resting egg of S-type and L-type rotifer were 86.7 inds./ml for YY-S strain and 45.8 inds./ml for O-L strain, respectively.

• Journal of the Korean Statistical Society
• /
• v.8 no.2
• /
• pp.125-130
• /
• 1979

It is well known that $L_2(m)$ type PBIB designs have the Property A, so they are BNAS PBIB designs. However, $L_3(m)$ type PBIB designs are not of type of Property A but do have the factorial structure (Cotter, John, and Smith(1973)). In this paper, the properties of the $L_3(m)$ type PBIB designs are investigated. Extended Property A and fractional BNAS are defined and a solution formula for the treatment effects in the $L_32(m)$ type designs is obtained.