• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.215-218
• /
• 2005

For the production of cold forged parts with near-net-shape attributes, the quality of the tool system is responsible for an essential portion of costs fer the finished components. Therefore, a tool lift is one of the important issues on cold forging industry. There are many complicated variables related with tool life, such as material, heat-treatment, coating, lubricant, process design. In this study, heat-treatment of tool material and lubricant are investigated to improve the tool life. Deep cryogenic treatment of tool steel is very efficient to improve the wear resistance due to the fine carbide. And, friction factor of lubricants for cold forging are measured by the ring compression test. Zinc-Phosphate and $MoS_2$ lubricant is effective to sustain the friction factor under 0.1.

• 한국표면공학회지
• /
• 제28권2호
• /
• pp.77-82
• /
• 1995

In this study, we examined the relationships between the coating film's properties, such as microhardness, adhesion of coating fil $m_strate, and machining tool's life time. Samples were prepared by coating TiN on the 5.5 diameter twist drills using reactive ion plating technology, For measuring microhardness and adhesion of fil $m_strate, HSS plate was used for substrate. TiN coated drill's life time was dependent on the adhesion of fil $m_strate and averagely increased by several ten times more than uncoated drill's. The major parameter affecting TiN coated drill's life time was the strong adhesion between coating film and substrate.ate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.33-34
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.461-462
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.647-648
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.1035-1036
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.11-12
• /
• 2009

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제21권2호
• /
• pp.93-100
• /
• 2018

Purpose: Rome criteria are considered the gold standard for diagnosing functional constipation. The modified Bristol stool form scale (m-BSFS) was validated to measure stool form in children. However, neither the potential use of the m-BSFS as a tool to facilitate the diagnosis of potential constipation, nor the agreement between m-BSFS and stool consistency by Rome has been studied. Our objective is to determine if m-BSFS is a reliable tool to facilitate detection of constipation; and the agreement between stool form by m-BSFS and hard stool criteria in Rome. Methods: A survey tool with the Rome III criteria and the m-BSFS was developed. A Likert-scale addressed frequency of each stool form on the m-BSFS. Responses to Rome III and m-BSFS were compared. Results: The sensitivity and specificity of the m-BSFS was 79.2% and 66.0% respectively; and in children <4 years. improved to 81.2% and 75.0% respectively. There was poor agreement between hard stools by m-BSFS and the painful or hard bowel movement question of Rome Criteria. Conclusion: The potential utility of m-BSFS as a reasonably good tool to facilitate the diagnosis of potential constipation in children is shown. The poor agreement between painful or hard stool question in Rome III, and ratings for hard stool on the m-BSFS illustrates that one's perception may differ between a question and a picture. A useful pictorial tool to appraise stool form may, thus, be a favorable complement in the process of enquiry about bowel habits in well-child care.

• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.180-186
• /
• 2011

This paper describes a micro electrical discharge machining (MEDM) technique that uses an insulated tool in combination with ultrasonic vibration to drill micro holes. As the machining depth becomes deeper, the dispersion of debris and circulation of the dielectric fluid are difficult to occur. Consequently, machining becomes unstable in the machining region and unnecessary electrochemical dissolution and secondary discharge sparking occur at the tool side face. To reduce the amount of unnecessary side machining, an insulated tool was used. Ultrasonic vibration was applied to the MEDM work fluid to better remove debris. Through these methods, a $1000\;{\mu}m$ thick stainless steel plate was machined by using a $73\;{\mu}m$ diameter electrode. The diameters of the hole entrance and exit were $96\;{\mu}m$ and $88\;{\mu}m$, respectively. It took only 351s to completely drill one hole.

• 한국시뮬레이션학회논문지
• /
• 제22권4호
• /
• pp.49-55
• /
• 2013

최근 M&S 및 DM&S (Defense M&S) 환경의 복잡성이 높아짐에 따라 인간 등의 자율세력을 표현하기 위한 기술로 CGF/SAF (Computer Generated Force/Semi-Automated Force)가 주목 받고 있다. 그러나 기존의 OneSAF 과 같은 선진국의 CGF/SAF 기반 DM&S 환경은 DEVS 프레임워크 중심의 국내 DM&S 시스템과 유기적 연동이 어렵다. 따라서 본 논문에서는 DEVS M&S환경을 지원하는 에이전트 기반의 SAF 설계 방법론 및 모델링 도구를 제안하였다. 제안한 SAF 모델링 도구는 에이전트 모델링 GUI와 SAF 모델링 GUI로 나누어진다. 에이전트 모델링 환경은 간단한 UI를 활용한 규칙 입력만으로 에이전트를 생성할 수 있다. 또한 에이전트 단위테스트 환경을 추가하여 UI 기반의 에이전트 모델의 검증이 가능하다. SAF 모델을 생성하기 위한 환경으로 개개의 에이전트 모델들의 구조적 결합을 정의할 수 있도록 하였다. 본 연구의 모델링 도구 및 방법론을 통해 DM&S 연구자 및 개발자들이 DEVS 기반의 DM&S 및 SAF 시스템을 구축하는데 유용하게 활용될 수 있을 것으로 기대된다.