• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 지하공간 건설기술에 관한 서울 심포지움 논문집
• /
• pp.103-118
• /
• 1993

The application of T.B.M tunnelling has been progressively increased since the first entrance into Korea in 1985 and especially, its higher performance and safety is widely proved as a generalized tunnelling in hardrock tunnel construction, comparing wi th conventional method. This case announcement will be much helpful for your general understanding of T.B.M tunnelling and the development of tunneling technology by introducing the brief methods and construction results from the actual application cases of T.B.M tunnelling in Ulsan Water Supply Tunnel Project, the longest tunnel in Korea under construction by YOU ONE. Co.

• Parasites, Hosts and Diseases
• /
• 제57권1호
• /
• pp.9-15
• /
• 2019

Melting temperature shift ($T_m-shift$) is a new detection method that analyze the melting curve on real-time PCR thermocycler using SYBR Green I fluorescent dye. To establish a $T_m-shift$ method for the detection of Ancylostoma ceylanicum and A. tubaeforme in cats, specific primers, with GC tail of unequal length attached to their 5' end, were designed based on 2 SNP loci (ITS101 and ITS296) of the internal transcribed spacer 1 (ITS1) sequences. The standard curve of $T_m-shift$ was established using the standard plasmids of A. ceylanicum (AceP) and A. tubaeforme (AtuP). The $T_m-shift$ method stability, sensitivity, and accuracy were tested with reference to the standard curve, and clinical fecal samples were also examined. The results demonstrated that the 2 sets of primers based on the 2 SNPs could accurately distinguish between A. ceylanicum and A. tubaeforme. The coefficient of variation (CV) of $T_m$- values of AceP and AtuP was 0.07% and 0.06% in ITS101 and was 0.06% and 0.08% in ITS296, respectively. The minimum detectable DNA concentration was $5.22{\times}10^{-6}$ and $5.28{\times}10^{-6}ng/{\mu}l$ samples of AceP and AtuP, respectively. The accuracy of $T_m-shift$ method reached 100% based on examination of 10 hookworm DNA samples with known species. In the clinical detection of hookworm in 69 stray cat fecal sample, the $T_m-shift$ detection results were consistent with the microscopic examination and successfully differentiated between the 2-hookworm species. In conclusion, the developed method is a rapid, sensitive and accurate technique and can provide a promising tool for clinical detection and epidemiological investigation of cat-derived hookworms.

• 한국컴퓨터정보학회논문지
• /
• 제24권3호
• /
• pp.151-157
• /
• 2019

In this paper, we present a prototype system for controlling IoT home appliances via voice-based commands. A voice command has been widely deployed as one of unobtrusive user interfaces for applications in a variety of IoT domains. However, interoperability between diverse IoT systems is limited by several dominant companies providing voice assistants like Amazon Alexa or Google Now due to their proprietary systems. A global IoT standard, oneM2M has been proposed to mitigate the lack of interoperability between IoT systems. In this paper, we deployed oneM2M-based platforms for a voice record device like a wrist band and LED control device like a home appliance. We developed all the components for recording voices and controlling IoT devices, and demonstrate the feasibility of our proposed method based on oneM2M platforms and Google STT (Speech-to-Text) API for controlling home appliances by showing a user scenario for turning the LED device on and off via voice commands.

• 대한임베디드공학회논문지
• /
• 제17권2호
• /
• pp.93-100
• /
• 2022

In this paper, we propose a machine learning-based method for supporting resource management of IoT software platforms in a multi-modal sensing scenario. We assume that an IoT device installed with a oneM2M-compatible software platform is connected with various sensors such as PIR, sound, dust, ambient light, ultrasonic, accelerometer, through different embedded system interfaces such as general purpose input output (GPIO), I2C, SPI, USB. Based on a collected dataset including CPU usage and user-defined priority, a machine learning model is trained to estimate the level of nice value required to adjust according to the resource usage patterns. The proposed method is validated by comparing with a rule-based control strategy, showing its practical capability in a multi-modal sensing scenario of IoT devices.

• 한국산업보건학회지
• /
• 제27권2호
• /
• pp.123-129
• /
• 2017

Objectives: The purpose of this study is to enhance the application of analytical method of polar solvents(alcohols) by GCOTC (gas chromatography open tubular column) through the system suitability test(SST) to estimate the whole chromatographic system performance(integral part). Methods: To perform the SST, carried out repeatability(n=6) as analytical method of polar solvents by GCOTC, got the retention time($t_R$), standard deviation(${\sigma}_{n-1}$) of $t_R$, baseline width($w_b=4{\sigma}_{n-1}$) and calculated dead time($t_m$) by $v_m=d^2{\pi}L(f/4)$ and $v_m=t_m$ x flow rate. Results: In this experiment, obtained the basic data, there were $t_m=2$ min, methanol($t_R=3.569$, ${\sigma}_{n-1}=0.01$, $w_b=0.04$), ethanol ($t_R=3.892$, ${\sigma}_{n-1}=0.004$, $w_b=0.016$), isopropanol($t_R=4.209$, ${\sigma}_{n-1}=0.004$, $w_b=0.016$). By using these data, calculated the corrected retention time($t_R{^{\prime}}$), capacity factor(k), separation factor(${\alpha}$), number of theoretical plate(n) and resolution($R_s$) for SST and got the good results. Conclusions: Through the SST, could reconfirm the whole chromatographic performance system(integral part) for analytical method of polar solvents by GCOTC. Therefore, this analytical method expect to be widely applied at the related areas.

• 한국세라믹학회지
• /
• 제28권2호
• /
• pp.109-118
• /
• 1991

Steady-state sublimation vapour pressures of anhydrous bismuth triiodide have been measured by the torsion-effusion method from 488.8 to 570.5 K and equilibrium sublimation pressures were obtained from the steady-state data. The standard sublimation enthalpy changes derived by both second(modified sigma function) and third(average enthalpy method) law methods were 159.316${\pm}$0.055, 137.67${\pm}$1.43 kJ$.$mol-1 respectively. The standard sublmation entropy change derived by modified sigma function was 232.88${\pm}$0.10 J$.$K-1$.$mol-1. The reliable standard sublimation enthalpy change based on a correlation of {{{{ { TRIANGLE }`_{cr } ^{g } }} H{{{{ { 0} atop {m } }}(298.15K) and {{{{ { TRIANGLE }`_{cr } ^{g } }} S{{{{ { 0} atop {m } }}(298.15K), a recommended p(T) equation has been obtained for BiI3(cr) ; lg(p/Pa)=-(C$.$K/T)+5.071lg(T/K)-2.838${\times}$10-3(T/K)-7.758${\times}$103(K/T)2+1.4519 where C={{{{{ { TRIANGLE }`_{cr } ^{g } }} H{{{{ { 0} atop {m } }}(298.15K)/0.019146 kJ$.$mol-1}-456.27.

• Journal of Plant Biology
• /
• 제29권1호
• /
• pp.53-65
• /
• 1986

The montane forests of Ulreung Island, Korea, were investigated by the ZM school method. By comparing the montane forests of this island with those of Korean Peninsula and of Japan, a new order, F a g e t a l i a m u l t i n e r v i s, a new alliance, F a l g i o n m u l t i n e r v i s, a new association, H e p a t i c o-F a g e t u m m u l t i n e r v i s and Rhododendron brachycarpum-Pinus parviflora community were recognized. The H e p a t i c o - F a g e t u m m u l t i n e r v i s was further subdivided into four subassociations; Subass. of Sasa kurilensis, Subass. of Rumohra standishii, Subass. of Rhododendron brachycarpum and Subass. of typicum. Each community was described in terms of floristic, structural and environmental features.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2001년도 제18차 정기총회 및 학술발표 PROCEEDINGS
• /
• pp.58-60
• /
• 2001

Two experiments were conducted to study the effects of nutrient level and feeding method of split diets for a.m. and p.m. on laying hen performance. In both studies, ISA Brown layers were kept in laying hen cages and treatments were represented by three or four replicates each containing 25 or 34 birds. In Experiment 1, the control group(C) was fed a conventional single diet throughout the day and split diet groups(T1, T2 and T3) were offered high energy/protein - low Ca diet and low energy/protein - high Ca diets in a.m. and p.m., respectively. In split diet groups, ME and CP consumption, and feed cost required per day and per kg egg mass were significantly reduced(P＜0.05) compared to C group, while the hen-day egg production, average egg weight and daily feed intake were not different among treatments. In the second study, C and T1 groups were fed the diets same to the C and T2 groups in Experiment 1, respectively. And T2 group was fed the diet mixed with the split diets for a.m. in mash and p.m. in pellet used in T1 group. In T1 and T2 groups, daily feed intake and average egg weight were significantly reduced(P＜0.05), while the hen-day egg production was not influenced by the feeding system. Daily ME and CP consumption, and feed cost were reduced(P＜0.05) in T1 and T2, while the ME, CP and feed cost required per kg egg mass were not different to the C group. In both study, eggshell qualities were improved(P＜0.05) by split diet feeding. It was concluded the feed and nutrients consumption, feed cost per day or per kg egg mass could be spared by introducing split diets for a.m. and p.m., and the feeding method of mixed diet of split diets was also convenient and effective for sparing feed cost and improvement of eggshell quality.

• 대한수학회논문집
• /
• 제12권2호
• /
• pp.393-401
• /
• 1997

Let $A_1,A_2,\cdots,A_m$ and $B_1,B_2,\cdots,B_n$ be two sequences of events on a given probability space. Let $X_m$ and $Y_n$, respectively, be the number of those $A_i$ and $B_j$, which occur we establish new upper and lower bounds on the probability $P(X=r, Y=t)$ which improve upper bounds and classical lower bounds in terms of the bivariate binomial moment $S_{r,t},S_{r+1,t},S_{r,t+1}$ and $S_{r+1,t+1}$.

• 한국지반신소재학회논문집
• /
• 제4권3호
• /
• pp.45-52
• /
• 2005

대부분의 항만구조물은 초연약 지반상에 축조되고 있으며 도로나 건물부지에는 지반개량이 필요하다. 이 논문에서는 여러 사례연구를 통하여 표층처리후의 복토사례에 대하여 몇가지 고려사항을 언급하였다. 또한, 모래나 산토를 이용한 복토공법에 대하여 강도적용이 고려되었다. 국내 복토공법 토목섬유 인장강도는 15t/m, 복토두께는 1.6~3.1m, 점토지반의 표층강도는 $0.2{\sim}1.2t/m^2$이 대표적이다. 표층처리공 시공시 발생되는 지반교란, 점토유출, 장비전도 등의 사고를 최소화하기 위한 연구가 필요하다.