• Korean Journal of Applied Biomechanics
• /
• v.19 no.4
• /
• pp.663-669
• /
• 2009

The purpose of this study was to investigate the functional role of foot effectiveness when humans execute running turn maneuvers. Foot rotation angle at the starting turn and body angle at the vertical axis were analyzed through three-dimensional image analysis and ground reaction force analysis. Then, we created a simple equation: foot effectiveness = total foot rotation angle/total body rotation angle at the vertical axis. This equation made it possible to explain the dynamics of angular running turns. We analyzed data from running turns(0, 30, and 60) at average initial running velocities of 4.5, as well as rotations around the vertical axis during the running turns. As a result, the stance time, foot placement, and left and right force increased.

• Journal of the Korea Society for Simulation
• /
• v.22 no.4
• /
• pp.67-82
• /
• 2013

This paper presents multi-fidelity modeling and simulation (M&S) methodology to enhance simulation performance of engineering-level defense models. In this approach, a set of models with varying degrees of fidelity is exercised to reduce computational expense maintaining a similar level of system effectiveness. For multi-fidelity M&S principles, this paper defines model fidelity from two perspectives (i.e., model behavior and execution), and suggests the Fidelity Change Point (FCP) to specify the fidelity conversion. With these concepts, this paper centers on three ideas: 1) two models' structure which are the Behavioral-Fidelity Interchangeable Model (B-FIM) and the Executional-Fidelity Interchangeable Model (E-FIM), 2) modeling formalism, and 3) a simulation algorithm to support them. From an abstract case study regarding a target tracking scenario with the utilization of the proposed method, we can gain interesting experimental results regarding the enhancement of simulation performance. Finally, we expect that this work will serve various M&S-based analysis areas for enhancing simulation performance.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.5
• /
• pp.602-611
• /
• 2015

Even though GNSS provides highly accurate navigation information all over the world, it is vulnerable to jamming in the electronic warfare due to its weak signal power. The United States and Korea have plans to use terrestrial navigation systems as back-up systems during outage of GNSS. In order to develop back-up systems of GNSS, an M&S software platform is necessary for performance evaluation of various vehicle trajectories and integrated navigation systems. In this paper a design method of an M&S software is proposed for evaluation of multiple radio positioning integration systems. The proposed M&S software consists of a navigation environment generation part, a navigation algorithm part, a GUI part and a coverage analysis part. Effectiveness of the proposed design method is shown by implementing an M&S software for the GPS, DME and eLoran navigation systems.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.42-45
• /
• 2008

Recently, aluminum is widely used to reduce the vehicle weight. Aluminum curved extruded products are used for the design of automotive frame parts. This study focuses on the determination of process condition fur automotive bumper beam with various curvatures. In this study, a curvature prediction model has been proposed considering the geometric relationship and the characteristic of the curvature extrusion equipment. Using the proposed model and FE analysis, the appropriated process condition was determined to produce the bumper beam. Finally, curvature extrusion experiment was carried out to verify the effectiveness of the proposed curvature prediction model and the process condition.

• Transactions of Materials Processing
• /
• v.27 no.4
• /
• pp.244-249
• /
• 2018

Rhodium is a representative platinum group material. Rhodium is used in several industrial fields including jewelry, chemical reaction catalyst, electric component etc. In recently, ultra-fine rhodium wire has been applied to the pins of probe card used to test a semiconductor. In this study, in order to produce a fine rhodium wire with the diameter of $50{\mu}m$, a fine rhodium wire drawing process was designed. After design of the fine wire drawing process by using a uniform reduction ratio theory, finite element analysis was performed. Finally, fine wire drawing experiment was performed to verify the effectiveness of the designed process.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.7
• /
• pp.121-129
• /
• 2018

Since 2005, POSCO has been conducting continuous innovation activities using its own innovation methodology, QSS + (Quick Six Sigma Plus). Recently, the effectiveness of QSS + has been decreased owing to the different needs and purposes for each group. The purpose of this study is to compare the weights of the QSS + factors using AHP analysis. QSS + factors consist of two levels. The high level consists of 7 items : 'Master Plan, Waste Zero Activity, Daily Improvement Activity, Talent Development, Project Activity, Initiative/Encouragement activity'. The low level consists of 3 items '5S, My Machine, My M&S' for Daily Improvement Activity. As a result, we found that there was a difference between the weights of the four groups. We suggest the effective QSS + directions to improve the quality of POSCO.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.3
• /
• pp.110-117
• /
• 1998

A continuum-based configuration design sensitivity analysis method is developed for kinematically driven mechanical systems. The configuration design variable for mechanical systems is defined. The 3-1-3 Euler angle is employed as the orientation design variable. Kinematic admissibility conditions of configuration design change. Direct differentiation method is used to derive the governing equations of the design sensitivity. Numerical examples are presented to demonstrate the validity and effectiveness of the proposed method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.590-600
• /
• 2009

In the simulation of underwater vehicles such as a submarine or a torpedo, various type of simulations like an engineering level simulation for predicting the performance precisely and an engagement level simulation for examining the effectiveness of a certain tactic is required. For this reason, a tactics manager which can change the behavior of a simulation model according to external tactics is needed. In this study the tactics manager supporting a script language and engine which can represent various tactics and can help users define external input tactics for the tactic manager easily is suggested. Python and Lua which are representative among script languages have been compared and analyzed from the viewpoint of a tactic manage, and the tactic manger using the script engines of those script languages was implemented. To demonstrate the effectiveness of the tactic manager, a target motion analysis simulation of the warfare between a submarine and a surface ship.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.108-110
• /
• 2002

In this paper, a fault location algorithm is suggested for line to line faults in distribution networks. Conventional fault location algorithms use the symmetrical component transformation, a very useful tool for transmission network analysis. However, its application is restricted to balanced network only. Distribution networks are, in general, operated in unbalanced manners, therefore, conventional methods cannot be applied directly, which is the reason why there are few research results on fault location in distribution networks. Especially, the line to line fault is considered as a more difficult subject. The proposed algorithm uses direct 3-phase circuit analysis, which means it can be applied not only to balanced networks but also to unbalanced networks like distribution a network. The comparisons of simulation results between one of conventional methods and the suggested method are presented to show its effectiveness and accuracy.

• The Journal of Fisheries Business Administration
• /
• v.43 no.3
• /
• pp.43-57
• /
• 2012

According to the result of the recent survey on the current condition of loss of the fishing gears in the East, West and South seas, it is estimated that 50% of the fishing gears used for coastal trap and gill net fisheries are lost every year and 20~30% of those used for inshore trap and gill net fisheries are lost. It is reported that such loss of fishing gears leads to the loss of about 10% of 1.7M tons of the total annual catch from the gill nets and traps along the country's coasts and shores, which amounts to 15~170K tons. Submerged marine litters that have recently been accumulated because of the washed out or lost fishing gears significantly affect the development of fisheries resources as well as the natural environment. The purpose of this study is to identify the damages that the ever-increasing submerged marine litters of washed out fishing gears would have on the fishery and to analyze the effects of the coastal and inshore submerged marine litter collection business on the fishery management. For this, the economic analysis was carried out for the coastal and inshore submerged marine litter collection business based on the fishermen's expenses and earnings and their catch. The result of the analysis shows that the submerged marine litter collection business is quite effective in certain areas but rarely effective in other areas. However, taking into consideration that the litter collection would contribute to protecting the marine environment as well as the fisheries resources, it is expected to have a significant impact on the protection of the marine environment even in those areas where it is not effective for the protection of the fisheries resources.